3,811 research outputs found
Joint Multi-Cell Resource Allocation Using Pure Binary-Integer Programming for LTE Uplink
Due to high system capacity requirement, 3GPP Long Term Evolution (LTE) is
likely to adopt frequency reuse factor 1 at the cost of suffering severe
inter-cell interference (ICI). One of combating ICI strategies is network
cooperation of resource allocation (RA). For LTE uplink RA, requiring all the
subcarriers to be allocated adjacently complicates the RA problem greatly. This
paper investigates the joint multi-cell RA problem for LTE uplink. We model the
uplink RA and ICI mitigation problem using pure binary-integer programming
(BIP), with integrative consideration of all users' channel state information
(CSI). The advantage of the pure BIP model is that it can be solved by
branch-and-bound search (BBS) algorithm or other BIP solving algorithms, rather
than resorting to exhaustive search. The system-level simulation results show
that it yields 14.83% and 22.13% gains over single-cell optimal RA in average
spectrum efficiency and 5th percentile of user throughput, respectively.Comment: Accepted to IEEE Vehicular Technology Conference (VTC Spring), Seoul,
Korea, May, 201
Integration of Carrier Aggregation and Dual Connectivity for the ns-3 mmWave Module
Thanks to the wide availability of bandwidth, the millimeter wave (mmWave)
frequencies will provide very high data rates to mobile users in next
generation 5G cellular networks. However, mmWave links suffer from high
isotropic pathloss and blockage from common materials, and are subject to an
intermittent channel quality. Therefore, protocols and solutions at different
layers in the cellular network and the TCP/IP protocol stack have been proposed
and studied. A valuable tool for the end-to-end performance analysis of mmWave
cellular networks is the ns-3 mmWave module, which already models in detail the
channel, Physical (PHY) and Medium Access Control (MAC) layers, and extends the
Long Term Evolution (LTE) stack for the higher layers. In this paper we present
an implementation for the ns-3 mmWave module of multi connectivity techniques
for 3GPP New Radio (NR) at mmWave frequencies, namely Carrier Aggregation (CA)
and Dual Connectivity (DC), and discuss how they can be integrated to increase
the functionalities offered by the ns-3 mmWave module.Comment: 9 pages, 7 figures, submitted to the Workshop on ns-3 (WNS3) 201
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Dynamic Time-domain Duplexing for Self-backhauled Millimeter Wave Cellular Networks
Millimeter wave (mmW) bands between 30 and 300 GHz have attracted
considerable attention for next-generation cellular networks due to vast
quantities of available spectrum and the possibility of very high-dimensional
antenna ar-rays. However, a key issue in these systems is range: mmW signals
are extremely vulnerable to shadowing and poor high-frequency propagation.
Multi-hop relaying is therefore a natural technology for such systems to
improve cell range and cell edge rates without the addition of wired access
points. This paper studies the problem of scheduling for a simple
infrastructure cellular relay system where communication between wired base
stations and User Equipment follow a hierarchical tree structure through fixed
relay nodes. Such a systems builds naturally on existing cellular mmW backhaul
by adding mmW in the access links. A key feature of the proposed system is that
TDD duplexing selections can be made on a link-by-link basis due to directional
isolation from other links. We devise an efficient, greedy algorithm for
centralized scheduling that maximizes network utility by jointly optimizing the
duplexing schedule and resources allocation for dense, relay-enhanced OFDMA/TDD
mmW networks. The proposed algorithm can dynamically adapt to loading, channel
conditions and traffic demands. Significant throughput gains and improved
resource utilization offered by our algorithm over the static,
globally-synchronized TDD patterns are demonstrated through simulations based
on empirically-derived channel models at 28 GHz.Comment: IEEE Workshop on Next Generation Backhaul/Fronthaul Networks -
BackNets 201
An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications
The millimeter wave (mmWave) frequencies offer the potential of orders of
magnitude increases in capacity for next-generation cellular systems. However,
links in mmWave networks are susceptible to blockage and may suffer from rapid
variations in quality. Connectivity to multiple cells - at mmWave and/or
traditional frequencies - is considered essential for robust communication. One
of the challenges in supporting multi-connectivity in mmWaves is the
requirement for the network to track the direction of each link in addition to
its power and timing. To address this challenge, we implement a novel uplink
measurement system that, with the joint help of a local coordinator operating
in the legacy band, guarantees continuous monitoring of the channel propagation
conditions and allows for the design of efficient control plane applications,
including handover, beam tracking and initial access. We show that an
uplink-based multi-connectivity approach enables less consuming, better
performing, faster and more stable cell selection and scheduling decisions with
respect to a traditional downlink-based standalone scheme. Moreover, we argue
that the presented framework guarantees (i) efficient tracking of the user in
the presence of the channel dynamics expected at mmWaves, and (ii) fast
reaction to situations in which the primary propagation path is blocked or not
available.Comment: Submitted for publication in IEEE Transactions on Wireless
Communications (TWC
- …