Development and Validation of a Wearable Device to Provide Rich Somatosensory Stimulation for Rehabilitation After Sensorimotor Impairment

: Training sensory discrimination of the skin has the potential to reduce chronic pain due to sensorimotor impairments and increase sensorimotor function. Currently, there is no such device that can systematically provide rich skin stimulation suitable for a training protocol for individuals with amputation or major sensory impairment. This study describes the development and validation of a non-invasive wearable device meant to repeatedly and safely deliver somatosensory stimulations. The development was guided by a structured design control process to ensure the verifiability and validity of the design outcomes. Two sub-systems were designed: 1) a tactile display for touch and vibration sensations, and 2) a set of bands for sliding, pressure, and strain sensations. The device was designed with a versatile structure that allows for its application on different body parts. We designed a device-paired interactive computer program to enable structured sensory training sessions. Validation was performed with 11 individuals with intact limbs whose upper arm tactile sensitivity was measured over 5 training sessions. Tactile discrimination and perception threshold were measured using the standard 2-point discrimination and Semmes-Weinstein monofilament tests, respectively. The results of the monofilament test showed a significant improvement (p = 0.011), but the improvement was not significant for the 2-point discrimination test(p = 0.141). These promising results confirm the potential of the proposed training to increase the sensory acuity in the upper arms of individuals with intact limbs. Further studies will be conducted to determine how to transfer the findings of this work to improve the pain and/or functional rehabilitation in individuals with sensorimotor impairments

HapticHead - Augmenting Reality via Tactile Cues

Information overload is increasingly becoming a challenge in today's world. Humans have only a limited amount of attention to allocate between sensory channels and tend to miss or misjudge critical sensory information when multiple activities are going on at the same time. For example, people may miss the sound of an approaching car when walking across the street while looking at their smartphones. Some sensory channels may also be impaired due to congenital or acquired conditions. Among sensory channels, touch is often experienced as obtrusive, especially when it occurs unexpectedly. Since tactile actuators can simulate touch, targeted tactile stimuli can provide users of virtual reality and augmented reality environments with important information for navigation, guidance, alerts, and notifications. In this dissertation, a tactile user interface around the head is presented to relieve or replace a potentially impaired visual channel, called \emph{HapticHead}. It is a high-resolution, omnidirectional, vibrotactile display that presents general, 3D directional, and distance information through dynamic tactile patterns. The head is well suited for tactile feedback because it is sensitive to mechanical stimuli and provides a large spherical surface area that enables the display of precise 3D information and allows the user to intuitively rotate the head in the direction of a stimulus based on natural mapping. Basic research on tactile perception on the head and studies on various use cases of head-based tactile feedback are presented in this thesis. Several investigations and user studies have been conducted on (a) the funneling illusion and localization accuracy of tactile stimuli around the head, (b) the ability of people to discriminate between different tactile patterns on the head, (c) approaches to designing tactile patterns for complex arrays of actuators, (d) increasing the immersion and presence level of virtual reality applications, and (e) assisting people with visual impairments in guidance and micro-navigation. In summary, tactile feedback around the head was found to be highly valuable as an additional information channel in various application scenarios. Most notable is the navigation of visually impaired individuals through a micro-navigation obstacle course, which is an order of magnitude more accurate than the previous state-of-the-art, which used a tactile belt as a feedback modality. The HapticHead tactile user interface's ability to safely navigate people with visual impairments around obstacles and on stairs with a mean deviation from the optimal path of less than 6~cm may ultimately improve the quality of life for many people with visual impairments.Die Informationsüberlastung wird in der heutigen Welt zunehmend zu einer Herausforderung. Der Mensch hat nur eine begrenzte Menge an Aufmerksamkeit, die er zwischen den Sinneskanälen aufteilen kann, und neigt dazu, kritische Sinnesinformationen zu verpassen oder falsch einzuschätzen, wenn mehrere Aktivitäten gleichzeitig ablaufen. Zum Beispiel können Menschen das Geräusch eines herannahenden Autos überhören, wenn sie über die Straße gehen und dabei auf ihr Smartphone schauen. Einige Sinneskanäle können auch aufgrund von angeborenen oder erworbenen Erkrankungen beeinträchtigt sein. Unter den Sinneskanälen wird Berührung oft als aufdringlich empfunden, besonders wenn sie unerwartet auftritt. Da taktile Aktoren Berührungen simulieren können, können gezielte taktile Reize den Benutzern von Virtual- und Augmented Reality Anwendungen wichtige Informationen für die Navigation, Führung, Warnungen und Benachrichtigungen liefern. In dieser Dissertation wird eine taktile Benutzeroberfläche um den Kopf herum präsentiert, um einen möglicherweise beeinträchtigten visuellen Kanal zu entlasten oder zu ersetzen, genannt \emph{HapticHead}. Es handelt sich um ein hochauflösendes, omnidirektionales, vibrotaktiles Display, das allgemeine, 3D-Richtungs- und Entfernungsinformationen durch dynamische taktile Muster darstellt. Der Kopf eignet sich gut für taktiles Feedback, da er empfindlich auf mechanische Reize reagiert und eine große sphärische Oberfläche bietet, die die Darstellung präziser 3D-Informationen ermöglicht und es dem Benutzer erlaubt, den Kopf aufgrund der natürlichen Zuordnung intuitiv in die Richtung eines Reizes zu drehen. Grundlagenforschung zur taktilen Wahrnehmung am Kopf und Studien zu verschiedenen Anwendungsfällen von kopfbasiertem taktilem Feedback werden in dieser Arbeit vorgestellt. Mehrere Untersuchungen und Nutzerstudien wurden durchgeführt zu (a) der Funneling Illusion und der Lokalisierungsgenauigkeit von taktilen Reizen am Kopf, (b) der Fähigkeit von Menschen, zwischen verschiedenen taktilen Mustern am Kopf zu unterscheiden, (c) Ansätzen zur Gestaltung taktiler Muster für komplexe Arrays von Aktoren, (d) der Erhöhung des Immersions- und Präsenzgrades von Virtual-Reality-Anwendungen und (e) der Unterstützung von Menschen mit Sehbehinderungen bei der Führung und Mikronavigation. Zusammenfassend wurde festgestellt, dass taktiles Feedback um den Kopf herum als zusätzlicher Informationskanal in verschiedenen Anwendungsszenarien sehr wertvoll ist. Am interessantesten ist die Navigation von sehbehinderten Personen durch einen Mikronavigations-Hindernisparcours, welche um eine Größenordnung präziser ist als der bisherige Stand der Technik, der einen taktilen Gürtel als Feedback-Modalität verwendete. Die Fähigkeit der taktilen Benutzerschnittstelle HapticHead, Menschen mit Sehbehinderungen mit einer mittleren Abweichung vom optimalen Pfad von weniger als 6~cm sicher um Hindernisse und auf Treppen zu navigieren, kann letztendlich die Lebensqualität vieler Menschen mit Sehbehinderungen verbessern

Dual-Modality Haptic Feedback Improves Dexterous Task Execution with Virtual EMG-Controlled Gripper

Upper-extremity amputees who use myoelectric prostheses currently lack the haptic sensory information needed to perform dexterous activities of daily living. While considerable research has focused on restoring this haptic information, these approaches often rely on single-modality feedback schemes which are necessary but insufficient for the feedforward and feedback control strategies employed by the central nervous system. Multi-modality feedback approaches have been gaining attention in several application domains, however, the utility for myoelectric prosthesis use remains unclear. In this study, we investigated the utility of dual-modality haptic feedback in a virtual EMG-controlled grasp-and-hold task with a brittle object and variable load force. We recruited N=20 non-amputee participants to perform the task in four conditions: no feedback, vibration feedback of incipient slip, squeezing feedback of grip force, and dual (vibration + squeezing) feedback of incipient slip and grip force. Results suggest that receiving any feedback is better than receiving none, however, dual-modality feedback is far superior to either single-modality feedback approach in terms of preventing the object from breaking or dropping, even after it started slipping. Control with dual-modality feedback was also seen as more intuitive than with either of the single-modality feedback approaches

Tactile Displays for Pedestrian Navigation

Existing pedestrian navigation systems are mainly visual-based, sometimes with an addition of audio guidance. However, previous research has reported that visual-based navigation systems require a high level of cognitive efforts, contributing to errors and delays. Furthermore, in many situations a person’s visual and auditory channels may be compromised due to environmental factors or may be occupied by other important tasks. Some research has suggested that the tactile sense can effectively be used for interfaces to support navigation tasks. However, many fundamental design and usability issues with pedestrian tactile navigation displays are yet to be investigated. This dissertation investigates human-computer interaction aspects associated with the design of tactile pedestrian navigation systems. More specifically, it addresses the following questions: What may be appropriate forms of wearable devices? What types of spatial information should such systems provide to pedestrians? How do people use spatial information for different navigation purposes? How can we effectively represent such information via tactile stimuli? And how do tactile navigation systems perform? A series of empirical studies was carried out to (1) investigate the effects of tactile signal properties and manipulation on the human perception of spatial data, (2) find out the effective form of wearable displays for navigation tasks, and (3) explore a number of potential tactile representation techniques for spatial data, specifically representing directions and landmarks. Questionnaires and interviews were used to gather information on the use of landmarks amongst people navigating urban environments for different purposes. Analysis of the results of these studies provided implications for the design of tactile pedestrian navigation systems, which we incorporated in a prototype. Finally, field trials were carried out to evaluate the design and address usability issues and performance-related benefits and challenges. The thesis develops an understanding of how to represent spatial information via the tactile channel and provides suggestions for the design and implementation of tactile pedestrian navigation systems. In addition, the thesis classifies the use of various types of landmarks for different navigation purposes. These contributions are developed throughout the thesis building upon an integrated series of empirical studies.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Designing Tactile Interfaces for Abstract Interpersonal Communication, Pedestrian Navigation and Motorcyclists Navigation

The tactile medium of communication with users is appropriate for displaying information in situations where auditory and visual mediums are saturated. There are situations where a subject's ability to receive information through either of these channels is severely restricted by the environment they are in or through any physical impairments that the subject may have. In this project, we have focused on two groups of users who need sustained visual and auditory focus in their task: Soldiers on the battle field and motorcyclists. Soldiers on the battle field use their visual and auditory capabilities to maintain awareness of their environment to guard themselves from enemy assault. One of the major challenges to coordination in a hazardous environment is maintaining communication between team members while mitigating cognitive load. Compromise in communication between team members may result in mistakes that can adversely affect the outcome of a mission. We have built two vibrotactile displays, Tactor I and Tactor II, each with nine actuators arranged in a three-by-three matrix with differing contact areas that can represent a total of 511 shapes. We used two dimensions of tactile medium, shapes and waveforms, to represent verb phrases and evaluated ability of users to perceive verb phrases the tactile code. We evaluated the effectiveness of communicating verb phrases while the users were performing two tasks simultaneously. The results showed that performing additional visual task did not affect the accuracy or the time taken to perceive tactile codes. Another challenge in coordinating Soldiers on a battle field is navigating them to respective assembly areas. We have developed HaptiGo, a lightweight haptic vest that provides pedestrians both navigational intelligence and obstacle detection capabilities. HaptiGo consists of optimally-placed vibro-tactile sensors that utilize natural and small form factor interaction cues, thus emulating the sensation of being passively guided towards the intended direction. We evaluated HaptiGo and found that it was able to successfully navigate users with timely alerts of incoming obstacles without increasing cognitive load, thereby increasing their environmental awareness. Additionally, we show that users are able to respond to directional information without training. The needs of motorcyclists are di erent from those of Soldiers. Motorcyclists' need to maintain visual and auditory situational awareness at all times is crucial since they are highly exposed on the road. Route guidance systems, such as the Garmin, have been well tested on automobilists, but remain much less safe for use by motorcyclists. Audio/visual routing systems decrease motorcyclists' situational awareness and vehicle control, and thus increase the chances of an accident. To enable motorcyclists to take advantage of route guidance while maintaining situational awareness, we created HaptiMoto, a wearable haptic route guidance system. HaptiMoto uses tactile signals to encode the distance and direction of approaching turns, thus avoiding interference with audio/visual awareness. Evaluations show that HaptiMoto is intuitive for motorcyclists, and a safer alternative to existing solutions

INTERACTION BETWEEN SIGNAL COMPLEXITY AND PHYSICAL ACTIVITY IN VIBRO-TACTILE COMMUNICATION

Master'sMASTER OF ART

Remote tactile feedback on interactive surfaces

Direct touch input on interactive surfaces has become a predominating standard for the manipulation of digital information in our everyday lives. However, compared to our rich interchange with the physical world, the interaction with touch-based systems is limited in terms of flexibility of input and expressiveness of output. Particularly, the lack of tactile feedback greatly reduces the general usability of a touch-based system and hinders from a productive entanglement of the virtual information with the physical world. This thesis proposes remote tactile feedback as a novel method to provide programmed tactile stimuli supporting direct touch interactions. The overall principle is to spatially decouple the location of touch input (e.g. fingertip or hand) and the location of the tactile sensation on the user's body (e.g. forearm or back). Remote tactile feedback is an alternative concept which avoids particular challenges of existing approaches. Moreover, the principle provides inherent characteristics which can accommodate for the requirements of current and future touch interfaces. To define the design space, the thesis provides a structured overview of current forms of touch surfaces and identifies trends towards non-planar and non-rigid forms with more versatile input mechanisms. Furthermore, a classification highlights limitations of the current methods to generate tactile feedback on touch-based systems. The proposed notion of tactile sensory relocation is a form of sensory substitution. Underlying neurological and psychological principles corroborate the approach. Thus, characteristics of the human sense of touch and principles from sensory substitution help to create a technical and conceptual framework for remote tactile feedback. Three consecutive user studies measure and compare the effects of both direct and remote tactile feedback on the performance and the subjective ratings of the user. Furthermore, the experiments investigate different body locations for the application of tactile stimuli. The results show high subjective preferences for tactile feedback, regardless of its type of application. Additionally, the data reveals no significant differences between the effects of direct and remote stimuli. The results back the feasibility of the approach and provide parameters for the design of stimuli and the effective use of the concept. The main part of the thesis describes the systematical exploration and analysis of the inherent characteristics of remote tactile feedback. Four specific features of the principle are identified: (1) the simplification of the integration of cutaneous stimuli, (2) the transmission of proactive, reactive and detached feedback, (3) the increased expressiveness of tactile sensations and (4) the provision of tactile feedback during multi-touch. In each class, several prototypical remote tactile interfaces are used in evaluations to analyze the concept. For example, the PhantomStation utilizes psychophysical phenomena to reduce the number of single tactile actuators. An evaluation with the prototype compares standard actuator technologies with each other in order to enable simple and scalable implementations. The ThermalTouch prototype creates remote thermal stimuli to reproduce material characteristics on standard touchscreens. The results show a stable rate of virtual object discrimination based on remotely applied temperature profiles. The AutmotiveRTF system is implemented in a vehicle and supports the driver's input on the in-vehicle-infotainment system. A field study with the system focuses on evaluating the effects of proactive and reactive feedback on the user's performance. The main contributions of the dissertation are: First, the thesis introduces the principle of remote tactile feedback and defines a design space for this approach as an alternative method to provide non-visual cues on interactive surfaces. Second, the thesis describes technical examples to rapidly prototype remote tactile feedback systems. Third, these prototypes are deployed in several evaluations which highlight the beneficial subjective and objective effects of the approach. Finally, the thesis presents features and inherent characteristics of remote tactile feedback as a means to support the interaction on today's touchscreens and future interactive surfaces.Die Interaktion mit berührungsempfindlichen Oberflächen ist heute ein Standard für die Manipulation von digitaler Information. Jedoch weist die Bedienung dieser interaktiven Bildschirme starke Einschränkungen hinsichtlich der Flexibilität bei der Eingabe und der Ausdruckskraft der Ausgabe auf, wenn man sie mit den vielfältigen Möglichkeiten des Umgangs mit Objekten in unserer Alltagswelt vergleicht. Besonders die nicht vorhandenen Tastsinnesrückmeldungen vermindern stark die Benutzbarkeit solcher Systeme und verhindern eine effektive Verknüpfung von virtueller Information und physischer Welt. Die vorliegende Dissertation beschreibt den Ansatz der 'distalen taktilen Rückmeldungen' als neuartige Möglichkeit zur Vermittlung programmierter Tastsinnesreize an Benutzer interaktiver Oberflächen. Das Grundprinzip dabei ist die räumliche Trennung zwischen der Eingabe durch Berührung (z.B. mit der Fingerspitze) und dem daraus resultierenden taktilen Reiz am Körper der Benutzer (z.B. am Rücken). Dabei vermeidet das Konzept der distalen taktilen Rückmeldungen einzelne technische und konzeptionelle Nachteile existierender Ansätze. Zusätzlich bringt es Interaktionsmöglichkeiten mit sich, die den Eigenheiten der Interaktion mit aktuellen und auch zukünftigen berührungsempfindlichen Oberflächen Rechnung tragen. Zu Beginn zeigt ein Überblick zu relevanten Arbeiten den aktuellen Forschungstrend hin zu nicht-flachen und verformbaren berührungsempfindlichen Oberflächen sowie zu vielfältigeren Eingabemethoden. Eine Klassifizierung ordnet existierende technische Verfahren zur Erzeugung von künstlichen Tastsinnesreizen und stellt jeweils konzeptuelle und technische Herausforderungen dar. Der in dieser Arbeit vorgeschlagene Ansatz der Verlagerung von Tastsinnesreizen ist eine Form der sensorischen Substitution, zugrunde liegende neurologische und psychologische Prinzipien untermauern das Vorgehen. Die Wirkprinzipien des menschlichen Tastsinnes und die Systeme zur sensorischen Substitution liefern daher konzeptionelle und technische Richtlinien zur Umsetzung der distalen taktilen Rückmeldungen. Drei aufeinander aufbauende Benutzerstudien vergleichen die Auswirkungen von direkten und distalen taktilen Rückmeldungen auf die Leistung und das Verhalten von Benutzern sowie deren subjektive Bewertung der Interaktion. Außerdem werden in den Experimenten die Effekte von Tastsinnesreizen an verschiedenen Körperstellen untersucht. Die Ergebnisse zeigen starke Präferenzen für Tastsinnesrückmeldungen, unabhängig von deren Applikationsort. Die Daten ergeben weiterhin keine signifikanten Unterschiede bei den quantitativen Effekten von direktem und distalen Rückmeldungen. Diese Ergebnisse befürworten die Realisierbarkeit des Ansatzes und zeigen Richtlinien für weitere praktische Umsetzungen auf. Der Hauptteil der Dissertation beschreibt die systematische Untersuchung und Analyse der inhärenten Möglichkeiten, die sich aus der Vermittlung distaler taktiler Rückmeldungen ergeben. Vier verschiedene Charakteristika werden identifiziert: (1) die vereinfachte Integration von Tastsinnesreizen, (2) die Vermittlung von proaktiven, reaktiven und entkoppelten Rückmeldungen, (3) die erhöhte Bandbreite der taktilen Signale und (4) die Darstellung von individuellen Tastsinnesreizen für verschiedene Kontaktpunkte mit der berührungsempfindlichen Oberfläche. Jedes dieser Prinzipien wird durch prototypische Systeme umgesetzt und in Benutzerstudien analysiert. Beispielsweise nutzt das System PhantomStation psychophysikalische Illusionen, um die Anzahl der einzelnen Reizgeber zu reduzieren. In einer Evaluierung des Prototypen werden mehrere Aktuatortechnologien verglichen, um einfache und skalierbare Ansätze zu identifizieren. Der ThermalTouch-Prototyp wird dazu genutzt, distale thermale Reize zu vermitteln, um so Materialeigenschaften auf Berührungsbildschirmen darstellen zu können. Eine Benutzerstudie zeigt, dass sich auf Basis dieser Temperaturverläufe virtuelle Objekte unterscheiden lassen. Das AutomotiveRTF-System wird schließlich in ein Kraftfahrzeug integriert, um den Fahrer bei der Eingabe auf dem Informations- und Unterhaltungssystem zu unterstützen. Eine Feldstudie untersucht die Auswirkungen der proaktiven und reaktiven Rückmeldungen auf die Benutzerleistung. Die vorliegende Dissertation leistet mehrere Beiträge zur Mensch-Maschine-Interaktion: Das Prinzip der distalen taktilen Rückmeldungen wird eingeführt als Alternative zur Erzeugung nicht-visueller Rückmeldungen auf interaktiven Oberflächen. Es werden technische Verfahrensweisen zur prototypischen Implementierung solcher Systeme vorgeschlagen. Diese technischen Prototypen werden in einer Vielzahl verschiedener Benutzerstudien eingesetzt, welche die quantitativen und qualitativen Vorteile des Ansatzes aufzeigen. Schließlich wird gezeigt, wie sich das Prinzip zur Unterstützung heutiger und zukünftiger Interaktionsformen mit berührungsempfindlichen Bildschirmen nutzen lässt

Head-mounted Sensory Augmentation System for Navigation in Low Visibility Environments

Sensory augmentation can be used to assist in some tasks where sensory information is limited or sparse. This thesis focuses on the design and investigation of a head-mounted vibrotactile sensory augmentation interface to assist navigation in low visibility environments such as firefighters’ navigation or travel aids for visually impaired people. A novel head-mounted vibrotactile interface comprising a 1-by-7 vibrotactile display worn on the forehead is developed. A series of psychophysical studies is carried out with this display to (1) determine the vibrotactile absolute threshold, (2) investigate the accuracy of vibrotactile localization, and (3) evaluate the funneling illusion and apparent motion as sensory phenomena that could be used to communicate navigation signals. The results of these studies provide guidelines for the design of head-mounted interfaces. A 2nd generation head-mounted sensory augmentation interface called the Mark-II Tactile Helmet is developed for the application of firefighters’ navigation. It consists of a ring of ultrasound sensors mounted to the outside of a helmet, a microcontroller, two batteries and a refined vibrotactile display composed of seven vibration motors based on the results of the aforementioned psychophysical studies. A ‘tactile language’, that is, a set of distinguishable vibrotactile patterns, is developed for communicating navigation commands to the Mark-II Tactile Helmet. Four possible combinations of two command presentation modes (continuous, discrete) and two command types (recurring, single) are evaluated for their effectiveness in guiding users along a virtual wall in a structured environment. Continuous and discrete presentation modes use spatiotemporal patterns that induce the experience of apparent movement and discrete movement on the forehead, respectively. The recurring command type presents the tactile command repeatedly with an interval between patterns of 500 ms while the single command type presents the tactile command just once when there is a change in the command. The effectiveness of this tactile language is evaluated according to the objective measures of the users’ walking speed and the smoothness of their trajectory parallel to the virtual wall and subjective measures of utility and comfort employing Likert-type rating scales. The Recurring Continuous (RC) commands that exploit the phenomena of apparent motion are most effective in generating efficient routes and fast travel, and are most preferred. Finally, the optimal tactile language (RC) is compared with audio guidance using verbal instructions to investigate effectiveness in delivering navigation commands. The results show that haptic guidance leads to better performance as well as lower cognitive workload compared to auditory feedback. This research demonstrates that a head-mounted sensory augmentation interface can enhance spatial awareness in low visibility environments and could help firefighters’ navigation by providing them with supplementary sensory information

Tactile Arrays for Virtual Textures

This thesis describes the development of three new tactile stimulators for active touch, i.e. devices to deliver virtual touch stimuli to the fingertip in response to exploratory movements by the user. All three stimulators are designed to provide spatiotemporal patterns of mechanical input to the skin via an array of contactors, each under individual computer control. Drive mechanisms are based on piezoelectric bimorphs in a cantilever geometry. The first of these is a 25-contactor array (5 × 5 contactors at 2 mm spacing). It is a rugged design with a compact drive system and is capable of producing strong stimuli when running from low voltage supplies. Combined with a PC mouse, it can be used for active exploration tasks. Pilot studies were performed which demonstrated that subjects could successfully use the device for discrimination of line orientation, simple shape identification and line following tasks. A 24-contactor stimulator (6 × 4 contactors at 2 mm spacing) with improved bandwidth was then developed. This features control electronics designed to transmit arbitrary waveforms to each channel (generated on-the-fly, in real time) and software for rapid development of experiments. It is built around a graphics tablet, giving high precision position capability over a large 2D workspace. Experiments using two-component stimuli (components at 40 Hz and 320 Hz) indicate that spectral balance within active stimuli is discriminable independent of overall intensity, and that the spatial variation (texture) within the target is easier to detect at 320 Hz that at 40 Hz. The third system developed (again 6 × 4 contactors at 2 mm spacing) was a lightweight modular stimulator developed for fingertip and thumb grasping tasks; furthermore it was integrated with force-feedback on each digit and a complex graphical display, forming a multi-modal Virtual Reality device for the display of virtual textiles. It is capable of broadband stimulation with real-time generated outputs derived from a physical model of the fabric surface. In an evaluation study, virtual textiles generated from physical measurements of real textiles were ranked in categories reflecting key mechanical and textural properties. The results were compared with a similar study performed on the real fabrics from which the virtual textiles had been derived. There was good agreement between the ratings of the virtual textiles and the real textiles, indicating that the virtual textiles are a good representation of the real textiles and that the system is delivering appropriate cues to the user

Electrotactons: designing and evaluating electrotactile cues

Electrotactile feedback is a novel haptic feedback modality that can be used to evoke a desired level of alertness and emotion or convey multidimensional information to the user. However, there is a lack of research investigating its basic design parameters and how they can be used to create effective tactile cues. This thesis investigates the effect of Electrotactile feedback on the subjective perception of specific sensations, such as urgency, annoyance, valence and arousal, to find the number of distinguishable levels in each sensation. These levels are then used for designing structured, abstract, electrotactile messages called Electrotactons. These have potential benefits over vibration-based cues due to the greater flexibility of the actuators. Experiments 1, 2 & 4 investigated the effects of manipulating the basic electrotactile parameters pulse width, amplitude and pulse frequency on perceived sensations. The results showed that all parameters have a significant effect on the perceived sensations, except for pulse frequency not having an effect on valence. Also, pulse frequencies of 30 PPS and above did not influence the perceived sensations. Experiment 3 investigated the use of pulse width, amplitude and pulse frequency to convey three types of information simultaneously encoded into an electrotactile cue. This was the first attempt to design Electrotactons using the basic parameters of electrotactile feedback. The results showed overall recognition rates of 38.19% for the complete Electrotactons. For the individual component parameters, pulse width had a recognition rate of 71.67%, amplitude 70.27%, and pulse frequency 66.36%. Experiment 5 investigated intensity and pulse frequency to determine how many distinguishable levels could be perceived. Results showed that both intensity and pulse frequency significantly affected perception, with four distinguishable levels of intensity and two of pulse frequency. Experiment 6 investigated the use of intensity and pulse frequency from in Experiment 5 to improve the design of Electrotactons on three body locations using two different size electrodes. The results showed overall recognition rates of up to 65.31% for the complete Electrotactons. For the individual component parameters, intensity had a recognition rate of 68.68%, and pulse frequency 94.41%. These results add significant new knowledge about the parameter space of electrotactile cue design and help designers select suitable properties to use when creating electrotactile cues