On-Chip Transparent Wire Pipelining (invited paper)

Wire pipelining has been proposed as a viable mean to break the discrepancy between decreasing gate delays and increasing wire delays in deep-submicron technologies. Far from being a straightforwardly applicable technique, this methodology requires a number of design modifications in order to insert it seamlessly in the current design flow. In this paper we briefly survey the methods presented by other researchers in the field and then we thoroughly analyze the solutions we recently proposed, ranging from system-level wire pipelining to physical design aspects

Multiple voltage scheme with frequency variation for power minimization of pipelined circuits at high-level synthesis

High-Level Synthesis (HLS) is defined as a translation process from a behavioral description into structural description. The high-level synthesis process consists of three interdependent phases: scheduling, allocation and binDing The order of the three phases varies depending on the design flow. There are three important quality measures used to support design decision, namely size, performance and power consumption. Recently, with the increase in portability, the power consumption has become a very dominant factor in the design of circuits. The aim of low-power high-level synthesis is to schedule operations to minimize switching activity and select low power modules while satisfying timing constraints. This thesis presents a heuristic that helps minimize power consumption by operating the functional units at multiple voltages and varied clock frequencies. The algorithm presented here deals with pipelined operations where multiple instance of the same operation are carried out. The algorithm was implemented using C++, on LINUX platform

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Throughput-driven floorplanning with wire pipelining

The size of future high-performance SoC is such that the time-of-flight of wires connecting distant pins in the layout can be much higher than the clock period. In order to keep the frequency as high as possible, the wires may be pipelined. However, the insertion of flip-flops may alter the throughput of the system due to the presence of loops in the logic netlist. In this paper, we address the problem of floorplanning a large design where long interconnects are pipelined by inserting the throughput in the cost function of a tool based on simulated annealing. The results obtained on a series of benchmarks are then validated using a simple router that breaks long interconnects by suitably placing flip-flops along the wires

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve

Pipelining of register transfer netlists

This paper describes a method for pipelining of register-to-register netlists. We define algorithms for inserting latches in a data path, both inside each unit and between the units as well as between control logic and the data path and for readjusting the state transition table. Experimental results on several benchmarks show 30%-40% improvement in performance

VLSI Architecture for Polar Codes Using Fast Fourier Transform-Like Design

Polar code is a novel and high-performance communication algorithm with the ability to theoretically achieving the Shannon limit, which has attracted increasing attention recently due to its low encoding and decoding complexity. Hardware optimization further reduces the cost and achieves better timing performance enabling real-time applications on resource-constrained devices. This thesis presents an area-efficient architecture for a successive cancellation (SC) polar decoder. Our design applies high-level transformations to reduce the number of Processing Elements (PEs), i.e., only log2 N pre-computed PEs are required in our architecture for an N-bit code. We also propose a customized loop-based shifting register to reduce the consumption of the delay elements further. Our experimental results demonstrate that our architecture reduces 98.90% and 93.38% in the area and area-time product, respectively, compared to prior works