Cooperative Multi-Cell Block Diagonalization with Per-Base-Station Power Constraints

Block diagonalization (BD) is a practical linear precoding technique that eliminates the inter-user interference in downlink multiuser multiple-input multiple-output (MIMO) systems. In this paper, we apply BD to the downlink transmission in a cooperative multi-cell MIMO system, where the signals from different base stations (BSs) to all the mobile stations (MSs) are jointly designed with the perfect knowledge of the downlink channels and transmit messages. Specifically, we study the optimal BD precoder design to maximize the weighted sum-rate of all the MSs subject to a set of per-BS power constraints. This design problem is formulated in an auxiliary MIMO broadcast channel (BC) with a set of transmit power constraints corresponding to those for individual BSs in the multi-cell system. By applying convex optimization techniques, this paper develops an efficient algorithm to solve this problem, and derives the closed-form expression for the optimal BD precoding matrix. It is revealed that the optimal BD precoding vectors for each MS in the per-BS power constraint case are in general non-orthogonal, which differs from the conventional orthogonal BD precoder design for the MIMO-BC under one single sum-power constraint. Moreover, for the special case of single-antenna BSs and MSs, the proposed solution reduces to the optimal zero-forcing beamforming (ZF-BF) precoder design for the weighted sum-rate maximization in the multiple-input single-output (MISO) BC with per-antenna power constraints. Suboptimal and low-complexity BD/ZF-BF precoding schemes are also presented, and their achievable rates are compared against those with the optimal schemes.Comment: accepted in JSAC, special issue on cooperative communications on cellular networks, June 201

Improved Linear Precoding over Block Diagonalization in Multi-cell Cooperative Networks

In downlink multiuser multiple-input multiple-output (MIMO) systems, block diagonalization (BD) is a practical linear precoding scheme which achieves the same degrees of freedom (DoF) as the optimal linear/nonlinear precoding schemes. However, its sum-rate performance is rather poor in the practical SNR regime due to the transmit power boost problem. In this paper, we propose an improved linear precoding scheme over BD with a so-called "effective-SNR-enhancement" technique. The transmit covariance matrices are obtained by firstly solving a power minimization problem subject to the minimum rate constraint achieved by BD, and then properly scaling the solution to satisfy the power constraints. It is proved that such approach equivalently enhances the system SNR, and hence compensates the transmit power boost problem associated with BD. The power minimization problem is in general non-convex. We therefore propose an efficient algorithm that solves the problem heuristically. Simulation results show significant sum rate gains over the optimal BD and the existing minimum mean square error (MMSE) based precoding schemes.Comment: 21 pages, 4 figure

Receive Combining vs. Multi-Stream Multiplexing in Downlink Systems with Multi-Antenna Users

In downlink multi-antenna systems with many users, the multiplexing gain is strictly limited by the number of transmit antennas $N$ and the use of these antennas. Assuming that the total number of receive antennas at the multi-antenna users is much larger than $N$, the maximal multiplexing gain can be achieved with many different transmission/reception strategies. For example, the excess number of receive antennas can be utilized to schedule users with effective channels that are near-orthogonal, for multi-stream multiplexing to users with well-conditioned channels, and/or to enable interference-aware receive combining. In this paper, we try to answer the question if the $N$ data streams should be divided among few users (many streams per user) or many users (few streams per user, enabling receive combining). Analytic results are derived to show how user selection, spatial correlation, heterogeneous user conditions, and imperfect channel acquisition (quantization or estimation errors) affect the performance when sending the maximal number of streams or one stream per scheduled user---the two extremes in data stream allocation. While contradicting observations on this topic have been reported in prior works, we show that selecting many users and allocating one stream per user (i.e., exploiting receive combining) is the best candidate under realistic conditions. This is explained by the provably stronger resilience towards spatial correlation and the larger benefit from multi-user diversity. This fundamental result has positive implications for the design of downlink systems as it reduces the hardware requirements at the user devices and simplifies the throughput optimization.Comment: Published in IEEE Transactions on Signal Processing, 16 pages, 11 figures. The results can be reproduced using the following Matlab code: https://github.com/emilbjornson/one-or-multiple-stream

Evaluation of Eigenvalue and Block Diagonalization Beamforming Precoding Performance for 5G Technology over Rician Channel

In traditional wireless cellular, at the same cell, users can cause co-channel interference (CCI) between each other; CCI can deteriorate the channel’s capacity. A multiple-input multiple-output (MIMO) system with beamforming technology solves this CCI problem. Exploiting the channel state information (CSI) in a multi-user MIMO (MU-MIMO) system can improve the performance of the channel link by designing the precoding vectors for every user. A linear precoder has multiple methods, like Block diagonalization precoding (BDP) and Eigenvalue precoding (EP) that facilitate its use. This paper evaluates the symbol-detection performance for BDP and EP in MU-MIMO beamforming over a Rayleigh fading channel. Then, the channel matrix replaces the typical channel assumption with its correlated realistic Rician fading channel. Simulation results show that the Rician fading channel has performance improvement until with low Rician factor value, compared to a conventional channel. The high value of the Rician factor can reduce the error rate

Group Sparse Precoding for Cloud-RAN with Multiple User Antennas

Cloud radio access network (C-RAN) has become a promising network architecture to support the massive data traffic in the next generation cellular networks. In a C-RAN, a massive number of low-cost remote antenna ports (RAPs) are connected to a single baseband unit (BBU) pool via high-speed low-latency fronthaul links, which enables efficient resource allocation and interference management. As the RAPs are geographically distributed, the group sparse beamforming schemes attracts extensive studies, where a subset of RAPs is assigned to be active and a high spectral efficiency can be achieved. However, most studies assumes that each user is equipped with a single antenna. How to design the group sparse precoder for the multiple antenna users remains little understood, as it requires the joint optimization of the mutual coupling transmit and receive beamformers. This paper formulates an optimal joint RAP selection and precoding design problem in a C-RAN with multiple antennas at each user. Specifically, we assume a fixed transmit power constraint for each RAP, and investigate the optimal tradeoff between the sum rate and the number of active RAPs. Motivated by the compressive sensing theory, this paper formulates the group sparse precoding problem by inducing the $\ell_0$-norm as a penalty and then uses the reweighted $\ell_1$ heuristic to find a solution. By adopting the idea of block diagonalization precoding, the problem can be formulated as a convex optimization, and an efficient algorithm is proposed based on its Lagrangian dual. Simulation results verify that our proposed algorithm can achieve almost the same sum rate as that obtained from exhaustive search