592 research outputs found

    Performance optimization of wireless sensor networks for remote monitoring

    Get PDF
    Wireless sensor networks (WSNs) have gained worldwide attention in recent years because of their great potential for a variety of applications such as hazardous environment exploration, military surveillance, habitat monitoring, seismic sensing, and so on. In this thesis we study the use of WSNs for remote monitoring, where a wireless sensor network is deployed in a remote region for sensing phenomena of interest while its data monitoring center is located in a metropolitan area that is geographically distant from the monitored region. This application scenario poses great challenges since such kind of monitoring is typically large scale and expected to be operational for a prolonged period without human involvement. Also, the long distance between the monitored region and the data monitoring center requires that the sensed data must be transferred by the employment of a third-party communication service, which incurs service costs. Existing methodologies for performance optimization of WSNs base on that both the sensor network and its data monitoring center are co-located, and therefore are no longer applicable to the remote monitoring scenario. Thus, developing new techniques and approaches for severely resource-constrained WSNs is desperately needed to maintain sustainable, unattended remote monitoring with low cost. Specifically, this thesis addresses the key issues and tackles problems in the deployment of WSNs for remote monitoring from the following aspects. To maximize the lifetime of large-scale monitoring, we deal with the energy consumption imbalance issue by exploring multiple sinks. We develop scalable algorithms which determine the optimal number of sinks needed and their locations, thereby dynamically identifying the energy bottlenecks and balancing the data relay workload throughout the network. We conduct experiments and the experimental results demonstrate that the proposed algorithms significantly prolong the network lifetime. To eliminate imbalance of energy consumption among sensor nodes, a complementary strategy is to introduce a mobile sink for data gathering. However, the limited communication time between the mobile sink and nodes results in that only part of sensed data will be collected and the rest will be lost, for which we propose the concept of monitoring quality with the exploration of sensed data correlation among nodes. We devise a heuristic for monitoring quality maximization, which schedules the sink to collect data from selected nodes, and uses the collected data to recover the missing ones. We study the performance of the proposed heuristic and validate its effectiveness in improving the monitoring quality. To strive for the fine trade-off between two performance metrics: throughput and cost, we investigate novel problems of minimizing cost with guaranteed throughput, and maximizing throughput with minimal cost. We develop approximation algorithms which find reliable data routing in the WSN and strategically balance workload on the sinks. We prove that the delivered solutions are fractional of the optimum. We finally conclude our work and discuss potential research topics which derive from the studies of this thesis

    Two-Hop Routing with Traffic-Differentiation for QoS Guarantee in Wireless Sensor Networks

    Get PDF
    This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN applications having different types of data traffic with several priorities. The protocol achieves to increase Packet Reception Ratio (PRR) and reduce end-to-end delay while considering multi-queue priority policy, two-hop neighborhood information, link reliability and power efficiency. The protocol is modular and utilizes effective methods for estimating the link metrics. Numerical results show that the proposed protocol is a feasible solution to addresses QoS service differenti- ation for traffic with different priorities.Comment: 13 page

    A Trapezoidal Fuzzy Membership Genetic Algorithm (TFMGA) for Energy and Network Lifetime Maximization under Coverage Constrained Problems in Heterogeneous Wireless Sensor Networks

    Get PDF
    Network lifetime maximization of Wireless Heterogeneous Wireless Sensor Networks (HWSNs) is a difficult problem. Though many methods have been introduced and developed in the recent works to solve network lifetime maximization. However, in HWSNs, the energy efficiency of sensor nodes becomes also a very difficult issue. On the other hand target coverage problem have been also becoming most important and difficult problem. In this paper, new Markov Chain Monte Carlo (MCMC) is introduced which solves the energy efficiency of sensor nodes in HWSN. At initially graph model is modeled to represent HWSNs with each vertex representing the assignment of a sensor nodes in a subset. At the same time, Trapezoidal Fuzzy Membership Genetic Algorithm (TFMGA) is proposed to maximize the number of Disjoint Connected Covers (DCC) and K-Coverage (KC) known as TFMGA-MDCCKC. Based on gene and chromosome information from the TFMGA, the gene seeks an optimal path on the construction graph model that maximizes the MDCCKC. In TFMGA gene thus focuses on finding one more connected covers and avoids creating subsets particularly. A local search procedure is designed to TFMGA thus increases the search efficiency. The proposed TFMGA-MDCCKC approach has been applied to a variety of HWSNs. The results show that the TFMGA-MDCCKC approach is efficient and successful in finding optimal results for maximizing the lifetime of HWSNs. Experimental results show that proposed TFMGA-MDCCKC approach performs better than Bacteria Foraging Optimization (BFO) based approach, Ant Colony Optimization (ACO) method and the performance of the TFMGA-MDCCKC approach is closer to the energy-conserving strategy

    Coordinated movement of multiple mobile sinks in a wireless sensor network for improved lifetime

    Get PDF
    Sink mobility is one of the most effective solutions for improving lifetime and has been widely investigated for the last decade. Algorithms for single-sink mobility are not directly applied to the multiple-sink case due to the latter’s specific challenges. Most of the approaches proposed in the literature use mathematical programming techniques to solve the multiple-sink mobility problem. However, doing so leads to higher complexities when traffic flow information for any possible sink-site combinations is included in the model. In this paper, we propose two algorithms that do not consider all possible sink-site combinations to determine migration points. We first present a centralized movement algorithm that uses an energy-cost matrix for a user-defined threshold number of combinations to coordinate multiple-sink movement. We also give a distributed algorithm that does not use any prior network information and has a low message exchange overhead. Our simulations show that the centralized algorithm gives better network lifetime performance compared to previously proposed MinDiff-RE, random movement, and static-sink algorithms. Our distributed algorithm has a lower network lifetime than centralized algorithms; sinks travel significantly less than in all the other schemes. © 2015, Koç and Korpeoglu

    Mathematical Models and Algorithms for Network Flow Problems Arising in Wireless Sensor Network Applications

    Get PDF
    We examine multiple variations on two classical network flow problems, the maximum flow and minimum-cost flow problems. These two problems are well-studied within the optimization community, and many models and algorithms have been presented for their solution. Due to the unique characteristics of the problems we consider, existing approaches cannot be directly applied. The problem variations we examine commonly arise in wireless sensor network (WSN) applications. A WSN consists of a set of sensors and collection sinks that gather and analyze environmental conditions. In addition to providing a taxonomy of relevant literature, we present mathematical programming models and algorithms for solving such problems. First, we consider a variation of the maximum flow problem having node-capacity restrictions. As an alternative to solving a single linear programming (LP) model, we present two alternative solution techniques. The first iteratively solves two smaller auxiliary LP models, and the second is a heuristic approach that avoids solving any LP. We also examine a variation of the maximum flow problem having semicontinuous restrictions that requires the flow, if positive, on any path to be greater than or equal to a minimum threshold. To avoid solving a mixed-integer programming (MIP) model, we present a branch-and-price algorithm that significantly improves the computational time required to solve the problem. Finally, we study two dynamic network flow problems that arise in wireless sensor networks under non-simultaneous flow assumptions. We first consider a dynamic maximum flow problem that requires an arc to transmit a minimum amount of flow each time it begins transmission. We present an MIP for solving this problem along with a heuristic algorithm for its solution. Additionally, we study a dynamic minimum-cost flow problem, in which an additional cost is incurred each time an arc begins transmission. In addition to an MIP, we present an exact algorithm that iteratively solves a relaxed version of the MIP until an optimal solution is found

    Sinks Mobility Strategy in IPv6-based WSNs for Network Lifetime Improvement

    Get PDF
    International audienceThis paper investigates the sinks mobility in IPv6- based wireless sensors networks and specially in the new IETF proposed protocol RPL (Routing Protocol for Low power and Lossy Networks). We also show that even the mobility of sinks is not an explicit design criteria, the use of mobile sinks improves the network lifetime. In this work, we propose a new distributed and weighted moving strategy for sinks in RPL. We compared our proposed mobility approach with different others strategies. The results show that our proposed mobility approach notably balances the network load which leads to a significant network lifetime gain in large scale network

    Stratégie de Placement des Puits Mobiles dans les Réseaux de Capteurs sans Fil pour Bâtiments

    Get PDF
    National audienceLe besoin des réseaux de capteurs sans fil croit très rapidement dans un large éventail d'applications industrielles. Parmi celles-ci se trouve l'observation, le suivi des données physiques et l'automatisation des bâtiments. Dans ces réseaux, un grand nombre de capteurs transmettent via multi sauts les données collectées vers le puits le plus proche. Les capteurs qui sont proches des puits épuisent leurs réserves d'énergie beaucoup plus rapidement que les capteurs distants car ils ont une charge de trafic très importante. Ceci est dû au fait qu'ils transmettent leurs propres données ainsi que les données des capteurs éloignés provoquant ainsi prématurément la fin de la durée de vie du réseau. Le déplacement périodique des puits permet de résoudre ce problème en distribuant la charge du trafic entre les capteurs et améliorer ainsi la durée de vie du réseau. Dans ce travail, nous proposons un nouvel algorithme qui détermine le positionnement de plusieurs puits mobiles dans un réseau large échelle afin d'augmenter la durée de vie du réseau. Son principe se base sur le déplacement régulier des puits vers les capteurs distants qui ont le plus grand nombre de sauts à faire pour atteindre le puits le plus proche. Nous avons évalué les performances de notre solution par des simulations et comparé avec d'autres stratégies. Les résultats montrent que notre solution améliore considérablement la durée de vie du réseau et équilibre notablement la consommation d'énergie entre les nœuds. Ces résultats sont très utiles pour le déploiement réel de réseaux de capteurs sans fil au sein des bâtiments

    Mobility based energy efficient and multi-sink algorithms for consumer home networks

    Get PDF
    With the fast development of the Internet, wireless communications and semiconductor devices, home networking has received significant attention. Consumer products can collect and transmit various types of data in the home environment. Typical consumer sensors are often equipped with tiny, irreplaceable batteries and it therefore of the utmost importance to design energy efficient algorithms to prolong the home network lifetime and reduce devices going to landfill. Sink mobility is an important technique to improve home network performance including energy consumption, lifetime and end-to-end delay. Also, it can largely mitigate the hot spots near the sink node. The selection of optimal moving trajectory for sink node(s) is an NP-hard problem jointly optimizing routing algorithms with the mobile sink moving strategy is a significant and challenging research issue. The influence of multiple static sink nodes on energy consumption under different scale networks is first studied and an Energy-efficient Multi-sink Clustering Algorithm (EMCA) is proposed and tested. Then, the influence of mobile sink velocity, position and number on network performance is studied and a Mobile-sink based Energy-efficient Clustering Algorithm (MECA) is proposed. Simulation results validate the performance of the proposed two algorithms which can be deployed in a consumer home network environment

    A survey of network lifetime maximization techniques in wireless sensor networks

    No full text
    Emerging technologies, such as the Internet of things, smart applications, smart grids and machine-to-machine networks stimulate the deployment of autonomous, selfconfiguring, large-scale wireless sensor networks (WSNs). Efficient energy utilization is crucially important in order to maintain a fully operational network for the longest period of time possible. Therefore, network lifetime (NL) maximization techniques have attracted a lot of research attention owing to their importance in terms of extending the flawless operation of battery-constrained WSNs. In this paper, we review the recent developments in WSNs, including their applications, design constraints and lifetime estimation models. Commencing with the portrayal of rich variety definitions of NL design objective used for WSNs, the family of NL maximization techniques is introduced and some design guidelines with examples are provided to show the potential improvements of the different design criteri
    • …
    corecore