Energy efficiency measurement procedure for gearboxes in their entire operating range

Over the last decade, forced regulations and a growing social awareness with respect to energy efficiency have resulted in a renewed interest in the research for high efficient electrical machines. When an electrical motor is coupled to a machine, in many cases a gearbox or belt transmission is used. Research shows a lack of information on energy efficiency of these components. In comparison to electrical motors and drives, there is very few regulation and if efficiency values can be found in catalogues, there is no regulated test procedure available to validate the data. As a result, the reliability of these efficiency values is unknown and comparison between manufacturers and technologies is impossible. In this paper a test bench is proposed to measure the energy efficiency of a gearbox with an accuracy up to 0.4%. The test bench is used to measure the efficiency of gearboxes in their entire speed and torque range. Contour maps are used to visualize these measurement results. Moreover, a measurement campaign using different gearboxes is carried out to compare the energy efficiency in the manufacturers catalogue and the measured efficiency

Performance Analysis of Hybrid and Full Electrical Vehicles Equipped with Continuously Variable Transmissions

The main aim of this paper is to study the potential impacts in hybrid and full electrical vehicles performance by utilising continuously variable transmissions. This is achieved by two stages. First, for Electrical Vehicles (EVs), modelling and analysing the powertrain of a generic electric vehicle is developed using Matlab/Simulink-QSS Toolkit, with and without a transmission system of varying levels of complexity. Predicted results are compared for a typical electrical vehicle in three cases: without a gearbox, with a Continuously Variable Transmission (CVT), and with a conventional stepped gearbox. Second, for Hybrid Electrical Vehicles (HEVs), a twin epicyclic power split transmission model is used. Computer programmes for the analysis of epicyclic transmission based on a matrix method are developed and used. Two vehicle models are built-up; namely: traditional ICE vehicle, and HEV with a twin epicyclic gearbox. Predictions for both stages are made over the New European Driving Cycle (NEDC).The simulations show that the twin epicyclic offers substantial improvements of reduction in energy consumption in HEVs. The results also show that it is possible to improve overall performance and energy consumption levels using a continuously variable ratio gearbox in EVs

Optimal design and implementation of a drivetrain for an ultra-light electric vehicle

This paper presents an integrated design of a drivetrain for a single-person ultra-light electric vehicle (ULEV). To calculate losses and efficiency of the inverter, the permanent magnet synchronous machines (PMSMs) and the gearbox, parameterised analytical models are used. For the gearbox - which has a single gear ratio - the studied parameters are the gear ratio, the number of stages, the number of teeth and the module of each spur gear combination. The novelty of the paper is that it learns how the total average efficiency and the total mass of the drivetrain depend on the gear ratio, on the number of stages in the gearbox, on the motor parameters and on the chosen several driving cycles including the new European driving cycle (NEDC). On the basis of the presented results, it is possible to choose the right configuration of power electronics, PMSM and gearbox in order to have a good trade-off between high efficiency and low mass

Multi-objective optimisation for battery electric vehicle powertrain topologies

Electric vehicles are becoming more popular in the market. To be competitive, manufacturers need to produce vehicles with a low energy consumption, a good range and an acceptable driving performance. These are dependent on the choice of components and the topology in which they are used. In a conventional gasoline vehicle, the powertrain topology is constrained to a few well-understood layouts; these typically consist of a single engine driving one axle or both axles through a multi-ratio gearbox. With electric vehicles, there is more flexibility, and the design space is relatively unexplored. In this paper, we evaluate several different topologies as follows: a traditional topology using a single electric motor driving a single axle with a fixed gear ratio; a topology using separate motors for the front axle and the rear axle, each with its own fixed gear ratio; a topology using in-wheel motors on a single axle; a four-wheel-drive topology using in-wheel motors on both axes. Multi-objective optimisation techniques are used to find the optimal component sizing for a given requirement set and to investigate the trade-offs between the energy consumption, the powertrain cost and the acceleration performance. The paper concludes with a discussion of the relative merits of the different topologies and their applicability to real-world passenger cars

Design of a Solar Panel Deployment and Tracking System for Pocketqube Pico-Satellite

Modularized small satellites will have even greater potential with better energy supply. In this paper, a PocketQube solar panel deployment and tracking system will be presented. The system is designed for a 3P PocketQubes. During the designing phase, trade-off analysis is done to meet the balance of weight, dimension and efficiency. Reliability, manufacturability, and cost are also considered from the beginning, as commercial production and launch are expected. The CAD design, dynamics analysis, motion simulation, and rendering for the project are undertaken by Solidworks, whereas Abaqus CAE is utilized for the finite element analysis of the vibration test of the panels. In the gimbal subsystem, we use two micro stepper motor to drive the panels via a two-axis gearbox, enabling the panels to track the sun omnidirectionally. In the panel subsystem, two types of customized spring hinges are designed. Robust and verified parts, such as burner resistors, are chose for the control and deployment system. After the continuous optimization process throughout the design phase, by comparing different manufacturing processes technologies, materials, and design details, the full scale prototypes of the gimbal subsystem were built and tested. In the end, the most feasible solution, as well as the suggestions for the development, were put forward

An investigation into hybrid power trains for vehicles with regenerative braking

Imperial Users onl

SAFER: Search and Find Emergency Rover

When disaster strikes and causes a structure to collapse, it poses a unique challenge to search and rescue teams as they assess the situation and search for survivors. Currently there are very few tools that can be used by these teams to aid them in gathering important information about the situation that allow members to stay at a safe distance. SAFER, Search and Find Emergency Rover, is an unmanned, remotely operated vehicle that can provide early reconnaissance to search and rescue teams so they may have more information to prepare themselves for the dangers that lay inside the wreckage. Over the past year, this team has restored a bare, non-operational chassis inherited from Roverwerx 2012 into a rugged and operational rover with increased functionality and reliability. SAFER uses a 360-degree camera to deliver real time visual reconnaissance to the operator who can remain safely stationed on the outskirts of the disaster. With strong drive motors providing enough torque to traverse steep obstacles and enough power to travel at up to 3 ft/s, SAFER can cover ground quickly and effectively over its 1-3 hour battery life, maximizing reconnaissance for the team. Additionally, SAFER contains 3 flashing beacons that can be dropped by the operator in the event a victim is found so that when team members do enter the scene they may easily locate victims. In the future, other teams may wish to improve upon this iteration by adding thermal imaging, air quality sensors, and potentially a robotic arm with a camera that can see in spaces too small for the entire rover to enter

Failure mode identification and end of life scenarios of offshore wind turbines: a review

In 2007, the EU established challenging goals for all Member States with the aim of obtaining 20% of their energy consumption from renewables, and offshore wind is expected to be among the renewable energy sources contributing highly towards achieving this target. Currently wind turbines are designed for a 25-year service life with the possibility of operational extension. Extending their efficient operation and increasing the overall electricity production will significantly increase the return on investment (ROI) and decrease the levelized cost of electricity (LCOE), considering that Capital Expenditure (CAPEX) will be distributed over a larger production output. The aim of this paper is to perform a detailed failure mode identification throughout the service life of offshore wind turbines and review the three most relevant end of life (EOL) scenarios: life extension, repowering and decommissioning. Life extension is considered the most desirable EOL scenario due to its profitability. It is believed that combining good inspection, operations and maintenance (O&M) strategies with the most up to date structural health monitoring and condition monitoring systems for detecting previously identified failure modes, will make life extension feasible. Nevertheless, for the cases where it is not feasible, other options such as repowering or decommissioning must be explored

Mod-2 wind turbine system concept and preliminary design report. Volume 1: Executive summary

The configuration development of the MOD-2 wind turbine system is presented. The MOD-2 is design optimized for commercial production rates which, in multi-unit installations, will be integrated into a utility power grid and achieve a cost of electricity at less than 4 cents per kilowatt hour