Development of a Hybrid Powered 2D Biped Walking Machine Designed for Rough Terrain Locomotion

Biped robots hold promise as terrestrial explorers because they require a single discrete foothold to place their next step. However, biped robots are multi-input multi-output dynamically unstable machines. This makes walking on rough terrain difficult at best. Progress has been made with non-periodic rough terrain like stairs or inclines with fully active walking machines. Terrain that requires the walker to change its gait pattern from a standard walk is still problematic. Most walking machines have difficulty detecting or responding to the small perturbations induced by this type of terrain. These small perturbations can lead to unstable gait cycles and possibly a fall. The Intelligent Systems and Automation Lab at the University of Kansas has built a three legged 2D biped walking machine to be used as a test stand for studying rough terrain walking. The specific aim of this research is to investigate how biped walkers can best maintain walking stability when acted upon by small perturbations caused by periodic rough terrain. The first walking machine prototype, referred to as Jaywalker has two main custom actuation systems. The first is the hip ratchet system. It allows the walker to have either a passive or active hip swing. The second is the hybrid parallel ankle actuator. This new actuator uses a pneumatic ram and stepper motor in parallel to produce an easily controlled high torque output. In open loop control it has less than a 1° tracking error and 0.065 RPM velocity error compared to a standard stepper motor. Step testing was conducted using the Jaywalker, with a passive hip, to determine if a walker with significant leg mass could walk without full body actuation. The results of testing show the Jaywalker is ultimately not capable of walking with a passive hip. However, the walking motion is fine until the terminal stance phase. At this point the legs fall quickly towards the ground as the knee extends the shank. This quick step phenomenon is caused by increased speeds and forces about the leg and hip caused by the extension of the shank. This issue can be overcome by fully actuating the hip, or by adding counterbalances to the legs about the hip

Toward Intelligent Biped-Humanoids Gaits Generation

In this chapter we will highlight our experimental studies on natural human walking analysis and introduce a biologically inspired design for simple bipedal locomotion system of humanoid robots. Inspiration comes directly from human walking analysis and human muscles mechanism and control. A hybrid algorithm for walking gaits generation is then proposed as an innovative alternative to classically used kinematics and dynamic equations solving, the gaits include knee, ankle and hip trajectories. The proposed algorithm is an intelligent evolutionary based on particle swarm optimization paradigm. This proposal can be used for small size humanoid robots, with a knee an ankle and a hip and at least six Degrees of Freedom (DOF).Comment: 15 page

Conceptual Design of a Single DOF Human-Like Eight-Bar Leg Mechanism

Abstract Legs are the most important elements for accomplishing human physical work including transportation or displacement. The article presents a mechanical reproduction of the human walking apparatus. Using design rules, a final mechanism configuration is achieved such that the crank is a binary link connected to a binary ground link. The resulting linkage is a single degree-of-freedom (DOF) eight-bar mechanism. The mechanism exemplifies the shape and movement of a human leg. The mechanism is simulated and tested to verify the proposed synthesis

Biped robot with unconventional kinematics

The article deals with the design of a robot with an unconventional kinematic structure, which is able to vertically stabilize the position of the robot base for the placement of sensors and handling superstructures. The robot concept was designed to have as few actuators as possible. The robot's kinematics was solved for the purpose of simulating the robot's movement and implementation into the robot's control system.Web of Science20225824581

Bio-Inspired Robotics

Modern robotic technologies have enabled robots to operate in a variety of unstructured and dynamically-changing environments, in addition to traditional structured environments. Robots have, thus, become an important element in our everyday lives. One key approach to develop such intelligent and autonomous robots is to draw inspiration from biological systems. Biological structure, mechanisms, and underlying principles have the potential to provide new ideas to support the improvement of conventional robotic designs and control. Such biological principles usually originate from animal or even plant models, for robots, which can sense, think, walk, swim, crawl, jump or even fly. Thus, it is believed that these bio-inspired methods are becoming increasingly important in the face of complex applications. Bio-inspired robotics is leading to the study of innovative structures and computing with sensory–motor coordination and learning to achieve intelligence, flexibility, stability, and adaptation for emergent robotic applications, such as manipulation, learning, and control. This Special Issue invites original papers of innovative ideas and concepts, new discoveries and improvements, and novel applications and business models relevant to the selected topics of ``Bio-Inspired Robotics''. Bio-Inspired Robotics is a broad topic and an ongoing expanding field. This Special Issue collates 30 papers that address some of the important challenges and opportunities in this broad and expanding field

Legged robotic locomotion with variable impedance joints

Humans have a complex musculoskeletal arrangement which gives them great behavioural flexibility. As well as simply moving their legs, they can modulate the impedance of them. Variable impedance has become a large field in robotics, and tailoring the impedance of a robot to a particular task can improve efficiency, stability, and potentially safety. Locomotion of a bipedal robot is a perfect example of a task for which variable impedance may provide such advantages, since it is a dynamic movement which involves periodic ground impacts. This thesis explores the creation of two novel bipedal robots with variable impedance joints. These robots aim to achieve some of the benefits of compliance, while retaining the behavioural flexibility to be truly versatile machines. The field of variable impedance actuators is explored and evaluated, before the design of the robots is presented. Of the two robots, BLUE (Bipedal Locomotion at the University of Edinburgh) has a 700mm hip rotation height, and is a saggital plane biped. miniBLUE has a hip rotation height of 465mm, and includes additional joints to allow hip adduction and abduction. Rapid prototyping techniques were utilised in the creation of both robots, and both robots are based around a custom, high performance electronics and communication architecture. The human walking cycle is analysed and a simple, parameterised representation developed. Walking trajectories gathered from human motion capture data, and generated from high level gait determinants are evaluated in dynamic simulation, and then on BLUE. With the robot being capable of locomotion, we explore the effect of varying stiffness on efficiency, and find that changing the stiffness can have an effect on the energy efficiency of the movement. Finally, we introduce a system for goal-based teleoperation of the robots, in which parameters are extracted from a user in a motion capture suit and replicated by the robot. In this way, the robot produces the same overall locomotion as the human, but with joint trajectories and stiffnesses that are more suited for its dynamics