4,448 research outputs found
轮式移动机器人瞬态模型鲁棒自适应同步终端滑模编队控制 (Robust adaptive synchronized formation control for the transient model of wheeled mobile robots with terminal sliding mode)
In the cooperative formation of wheeled mobile robots, the problem how to guarantee that mobile robots can track their own trajectories while synchronizing motions with others puts forward higher requirements on the design of control algorithms. A robust adaptive synchronized control with terminal sliding mode based on the algebraic graph theory is developed to solve this problem. Firstly, the nonlinear kinematics transient model of wheeled mobile robot is introduced. This model avoids the problem of multi-input coupling mutual interference in general kinematics model. Then, the synchronized control algorithm is designed according to the cross-coupling errors to realize the motion synchronization, and the external disturbance of the system is suppressed by the robust control. The adaptive law ensures the real-time adjustment of the switching gain. The stability analysis is carried out by using the Lyapunov method, which proves the convergence of the system tracking errors. Finally, the effectiveness of the designed algorithm is verified by MATLAB simulation
Keep Rollin' - Whole-Body Motion Control and Planning for Wheeled Quadrupedal Robots
We show dynamic locomotion strategies for wheeled quadrupedal robots, which
combine the advantages of both walking and driving. The developed optimization
framework tightly integrates the additional degrees of freedom introduced by
the wheels. Our approach relies on a zero-moment point based motion
optimization which continuously updates reference trajectories. The reference
motions are tracked by a hierarchical whole-body controller which computes
optimal generalized accelerations and contact forces by solving a sequence of
prioritized tasks including the nonholonomic rolling constraints. Our approach
has been tested on ANYmal, a quadrupedal robot that is fully torque-controlled
including the non-steerable wheels attached to its legs. We conducted
experiments on flat and inclined terrains as well as over steps, whereby we
show that integrating the wheels into the motion control and planning framework
results in intuitive motion trajectories, which enable more robust and dynamic
locomotion compared to other wheeled-legged robots. Moreover, with a speed of 4
m/s and a reduction of the cost of transport by 83 % we prove the superiority
of wheeled-legged robots compared to their legged counterparts.Comment: IEEE Robotics and Automation Letter
Slide-Down Prevention for Wheeled Mobile Robots on Slopes
Wheeled mobile robots on inclined terrain can slide down due to loss of traction and gravity. This type of instability, which is different from tip-over, can provoke uncontrolled motion or get the vehicle stuck. This paper proposes slide-down prevention by real-time computation of a straightforward stability margin for a given ground-wheel friction coefficient. This margin is applied to the case study of Lazaro, a hybrid skid-steer mobile robot with caster-leg mechanism that allows tests with four or five wheel contact points. Experimental results for both ADAMS simulations and the actual vehicle demonstrate the effectiveness of the proposed approach.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Recommended from our members
Design of an adaptive neural predictive nonlinear controller for nonholonomic mobile robot system based on posture identifier in the presence of disturbance
This paper proposes an adaptive neural predictive nonlinear controller to guide a nonholonomic wheeled mobile robot during continuous and non-continuous gradients trajectory tracking. The structure of the controller consists of two models that describe the kinematics and dynamics of the mobile robot system and a feedforward neural controller. The models are modified Elman neural network and feedforward multi-layer perceptron respectively. The modified Elman neural network model is trained off-line and on-line stages to guarantee the outputs of the model accurately represent the actual outputs of the mobile robot system. The trained neural model acts as the position and orientation identifier. The feedforward neural controller is trained off-line and adaptive weights are adapted on-line to find the reference torques, which controls the steady-state outputs of the mobile robot system. The feedback neural controller is based on the posture neural identifier and quadratic performance index optimization algorithm to find the optimal torque action in the transient state for N-step-ahead prediction. General back propagation algorithm is used to learn the feedforward neural controller and the posture neural identifier. Simulation results show the effectiveness of the proposed adaptive neural predictive control algorithm; this is demonstrated by the minimised tracking error and the smoothness of the torque control signal obtained with bounded external disturbances
- …