An Adaptive Security Protocol for a Wireless Sensor‐based Monitoring Network in Smart Grid Transmission Lines

In this paper, we propose a new security protocol for a wireless sensor network, which is designed for monitoring long range power transmission lines in smart grid. Part of the monitoring network is composed of optical fiber composite over head ground wire (OPGW), thus it can be secured with conventional security protocol. However, the wireless sensor network between two neighboring OPGW gateways remains vulnerable. Our proposed security protocol focuses on the wireless sensor network part, it provides mutual authentication, data integrity, and data confidentiality for both uplink and downlink transmissions between the sensor nodes and the OPGW gateway. Besides, our proposed protocol is adaptive to the dynamic node changes of the monitoring sensor network; for example, new sensors are added to the network, or some of the sensors are malfunctioning. We further propose a self‐healing process using an “i‐neighboring nodes” public key structure and an asymmetric algorithm. We also conduct energy consumption analysis for both general and extreme conditions to show that our security protocol improves the availability of the monitoring sensor network

Implementation of Transmission Line Fault Detection System using Long Range Wireless Sensor Networks

This paper proposes a fault detection system designed for transmission lines using Long-Range Wireless Sensor Network (LoRAWSN). The system is designed to detect and locate faults across transmission lines in real-time, which can significantly improve the reliability and efficiency of power transmission systems. A WSN will be built across transmission lines over an area. The faults identified by these sensor nodes is then transmitted to a central control unit, which analyses and displays the data. The LoRaWAN technology enables the WSN to cover long distances while consuming minimal power, making it ideal for monitoring transmission lines. The proposed fault detection system is evaluated through real world experiments, which demonstrate the feasibility and effectiveness of the proposed system. Overall, this paper presents a novel and practical approach for fault detection on transmission lines, which has the potential to improve the reliability and efficiency of power transmission systems

Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions

Traditional power grids are being transformed into Smart Grids (SGs) to address the issues in existing power system due to uni-directional information flow, energy wastage, growing energy demand, reliability and security. SGs offer bi-directional energy flow between service providers and consumers, involving power generation, transmission, distribution and utilization systems. SGs employ various devices for the monitoring, analysis and control of the grid, deployed at power plants, distribution centers and in consumers' premises in a very large number. Hence, an SG requires connectivity, automation and the tracking of such devices. This is achieved with the help of Internet of Things (IoT). IoT helps SG systems to support various network functions throughout the generation, transmission, distribution and consumption of energy by incorporating IoT devices (such as sensors, actuators and smart meters), as well as by providing the connectivity, automation and tracking for such devices. In this paper, we provide a comprehensive survey on IoT-aided SG systems, which includes the existing architectures, applications and prototypes of IoT-aided SG systems. This survey also highlights the open issues, challenges and future research directions for IoT-aided SG systems

A Survey on Communication Networks for Electric System Automation

Published in Computer Networks 50 (2006) 877–897, an Elsevier journal. The definitive version of this publication is available from Science Direct. Digital Object Identifier:10.1016/j.comnet.2006.01.005In today’s competitive electric utility marketplace, reliable and real-time information become the key factor for reliable delivery of power to the end-users, profitability of the electric utility and customer satisfaction. The operational and commercial demands of electric utilities require a high-performance data communication network that supports both existing functionalities and future operational requirements. In this respect, since such a communication network constitutes the core of the electric system automation applications, the design of a cost-effective and reliable network architecture is crucial. In this paper, the opportunities and challenges of a hybrid network architecture are discussed for electric system automation. More specifically, Internet based Virtual Private Networks, power line communications, satellite communications and wireless communications (wireless sensor networks, WiMAX and wireless mesh networks) are described in detail. The motivation of this paper is to provide a better understanding of the hybrid network architecture that can provide heterogeneous electric system automation application requirements. In this regard, our aim is to present a structured framework for electric utilities who plan to utilize new communication technologies for automation and hence, to make the decision making process more effective and direct.This work was supported by NEETRAC under Project #04-157

Smart container monitoring using custom-made WSN technology : from business case to prototype

This paper reports on the development of a prototype solution for tracking and monitoring shipping containers. Deploying wireless sensor networks (WSNs) in an operational environment remains a challenging task. We strongly believe that standardized methodologies and tools could enhance future WSN deployments and enable rapid prototype development. Therefore, we choose to use a step-by-step approach where each step gives us more insight in the problem at hand while shielding some of the complexity of the final solution. We observed that environment emulation is of the utmost importance, especially for harsh wireless conditions inside a container stacking. This lead us to extend our test lab with wireless link emulation capabilities. It is also essential to assess feasibility of concepts and design choices after every stage during prototype development. This enabled us to create innovative WSN solutions, including a multi-MAC framework and a robust gateway selection algorithm

mTOSSIM: A simulator that estimates battery lifetime in wireless sensor networks

Knowledge of the battery lifetime of the wireless sensor network is important for many situations, such as in evaluation of the location of nodes or the estimation of the connectivity, along time, between devices. However, experimental evaluation is a very time-consuming task. It depends on many factors, such as the use of the radio transceiver or the distance between nodes. Simulations reduce considerably this time. They allow the evaluation of the network behavior before its deployment. This article presents a simulation tool which helps developers to obtain information about battery state. This simulator extends the well-known TOSSIM simulator. Therefore it is possible to evaluate TinyOS applications using an accurate model of the battery consumption and its relation to the radio power transmission. Although an specific indoor scenario is used in testing of simulation, the simulator is not limited to this environment. It is possible to work in outdoor scenarios too. Experimental results validate the proposed model.Junta de Andalucía P07-TIC-02476Junta de Andalucía TIC-570

Channel estimation and transmit power control in wireless body area networks

Wireless body area networks have recently received much attention because of their application to assisted living and remote patient monitoring. For these applications, energy minimisation is a critical issue since, in many cases, batteries cannot be easily replaced or recharged. Reducing energy expenditure by avoiding unnecessary high transmission power and minimising frame retransmissions is therefore crucial. In this study, a transmit power control scheme suitable for IEEE 802.15.6 networks operating in beacon mode with superframe boundaries is proposed. The transmission power is modulated, frame-by-frame, according to a run-time estimation of the channel conditions. Power measurements using the beacon frames are made periodically, providing reverse channel gain and an opportunistic fade margin, set on the basis of prior power fluctuations, is added. This approach allows tracking of the highly variable on-body to on-body propagation channel without the need to transmit additional probe frames. An experimental study based on test cases demonstrates the effectiveness of the scheme and compares its performance with alternative solutions presented in the literature

Network-aware design-space exploration of a power-efficient embedded application

The paper presents the design and multi-parameter optimization of a networked embedded application for the health-care domain. Several hardware, software, and application parameters, such as clock frequency, sensor sampling rate, data packet rate, are tuned at design- and run-time according to application specifications and operating conditions to optimize hardware requirements, packet loss, power consumption. Experimental results show that further power efficiency can be achieved by considering also communication aspects during design space exploratio

Detailed examination of a packet collision model for Bluetooth Low Energy advertising mode

The aim of this paper is to investigate the amount of energy that is required to successfully transmit information inside the Bluetooth Low Energy (BLE) advertising packets. There are applications that require more than one BLE node to simultaneously transmit data. The BLE protocol utilizes a specific communication method termed advertising mode to perform unidirectional broadcasts of data from the advertising devices. However, with an increased number of BLE devices advertising simultaneously, there will be inevitable packet collisions from the advertising devices. This results in a waste of energy, specifically in low-power applications where lower consumption is desirable to minimize the need for battery replacements. This paper examines a packet collision model for the BLE advertising mode with the results validated using experimental data. Our analysis shows that when the throughput of the BLE network starts to fall due to an increase in the number of packet collisions, the energy consumption of the BLE nodes increase exponentially with respect to the number of nodes

Techno-economic evaluation of cognitive radio in a factory scenario

Wireless applications gradually enter every aspect of our life. Unfortunately, these applications must reuse the same scarce spectrum, resulting in increased interference and limited usability. Cognitive Radio proposes to mitigate this problem by adapting the operational parameters of wireless devices to varying interference conditions. However, it involves an increase in cost. In this paper we examine the economic balance between the added cost and the increased usability in one particular real-life scenario. We focus on the production floor of an industrial installation where wireless sensors monitor production machinery, and a wireless LAN is used as the data backbone. We examine the effects of implementing dynamic spectrum access by means of ideal RE sensing, and model the benefit in terms of increased reliability and battery lifetime. We estimate the financial cost of interference and the potential gain, and conclude that cognitive radio can bring business gains in real-life applications