A review of wildland fire spread modelling, 1990-present 3: Mathematical analogues and simulation models

In recent years, advances in computational power and spatial data analysis (GIS, remote sensing, etc) have led to an increase in attempts to model the spread and behvaiour of wildland fires across the landscape. This series of review papers endeavours to critically and comprehensively review all types of surface fire spread models developed since 1990. This paper reviews models of a simulation or mathematical analogue nature. Most simulation models are implementations of existing empirical or quasi-empirical models and their primary function is to convert these generally one dimensional models to two dimensions and then propagate a fire perimeter across a modelled landscape. Mathematical analogue models are those that are based on some mathematical conceit (rather than a physical representation of fire spread) that coincidentally simulates the spread of fire. Other papers in the series review models of an physical or quasi-physical nature and empirical or quasi-empirical nature. Many models are extensions or refinements of models developed before 1990. Where this is the case, these models are also discussed but much less comprehensively.Comment: 20 pages + 9 pages references + 1 page figures. Submitted to the International Journal of Wildland Fir

Effect of curing conditions and harvesting stage of maturity on Ethiopian onion bulb drying properties

The study was conducted to investigate the impact of curing conditions and harvesting stageson the drying quality of onion bulbs. The onion bulbs (Bombay Red cultivar) were harvested at three harvesting stages (early, optimum, and late maturity) and cured at three different temperatures (30, 40 and 50 oC) and relative humidity (30, 50 and 70%). The results revealed that curing temperature, RH, and maturity stage had significant effects on all measuredattributesexcept total soluble solids

A review of wildland fire spread modelling, 1990-present, 1: Physical and quasi-physical models

In recent years, advances in computational power and spatial data analysis (GIS, remote sensing, etc) have led to an increase in attempts to model the spread and behaviour of wildland fires across the landscape. This series of review papers endeavours to critically and comprehensively review all types of surface fire spread models developed since 1990. This paper reviews models of a physical or quasi-physical nature. These models are based on the fundamental chemistry and/or physics of combustion and fire spread. Other papers in the series review models of an empirical or quasi-empirical nature, and mathematical analogues and simulation models. Many models are extensions or refinements of models developed before 1990. Where this is the case, these models are also discussed but much less comprehensively.Comment: 31 pages + 8 pages references + 2 figures + 5 tables. Submitted to International Journal of Wildland Fir

Mechanism of saline deposition and surface flashover on high-voltage insulators near shoreline:mathematical models and experimental validations

This paper deals with sea salt transportation and deposition mechanisms and discusses the serious issue of degradation of outdoor insulators resulting from various environmental stresses and severe saline contaminant accumulation near the shoreline. The deterioration rate of outdoor insulators near the shoreline depends on the concentration of saline in the atmosphere, the influence of wind speed on the production of saline water droplets, moisture diffusion and saline penetration on the insulator surface. This paper consists of three parts: first a model of saline transportation and deposition, as well as saline penetration and moisture diffusion on outdoor insulators, is presented; second, dry-band initiation and formation modelling and characterization under various types of contamination distribution are proposed; finally, modelling of dry-band arcing validated by experimental investigation was carried out. The tests were performed on a rectangular surface of silicone rubber specimens (12 cm × 4 cm × 8 cm). The visualization of the dry-band formation and arcing was performed by an infrared camera. The experimental results show that the surface strength and arc length mainly depend upon the leakage distance and contamination distribution. Therefore, the model can be used to investigate insulator flashover near coastal areas and for mitigating saline flashover incidents.</p

Hot-Moments of Soil CO2 Efflux in a Water-Limited Grassland

The metabolic activity of water-limited ecosystems is strongly linked to the timing and magnitude of precipitation pulses that can trigger disproportionately high (i.e., hot-moments) ecosystem CO2 fluxes. We analyzed over 2-years of continuous measurements of soil CO2 efflux (Fs) under vegetation (Fsveg) and at bare soil (Fsbare) in a water-limited grassland. The continuous wavelet transform was used to: (a) describe the temporal variability of Fs; (b) test the performance of empirical models ranging in complexity; and (c) identify hot-moments of Fs. We used partial wavelet coherence (PWC) analysis to test the temporal correlation between Fs with temperature and soil moisture. The PWC analysis provided evidence that soil moisture overshadows the influence of soil temperature for Fs in this water limited ecosystem. Precipitation pulses triggered hot-moments that increased Fsveg (up to 9000%) and Fsbare (up to 17,000%) with respect to pre-pulse rates. Highly parameterized empirical models (using support vector machine (SVM) or an 8-day moving window) are good approaches for representing the daily temporal variability of Fs, but SVM is a promising approach to represent high temporal variability of Fs (i.e., hourly estimates). Our results have implications for the representation of hot-moments of ecosystem CO2 fluxes in these globally distributed ecosystems

Development of model based sensors for the supervision of a solar dryer

Solar dryers are increasingly used in developing countries as an alternative to drying in open air, however the inherent variability of the drying conditions during day and along year drive the need for achieving low cost sensors that would enable to characterize the drying process and to react accordingly. This paper provides three different and complementary approaches for model based sensors that make use of the psychrometric properties of the air inside the drying chamber and the temperature oscillations of the wood along day. The simplest smart sensor, Smart-1, using only two Sensirion sensors, allows to estimate the accumulated water extracted from wood along a complete drying cycle with a correlation coefficient of 0.97. Smart-2 is a model based sensor that relays on the diffusion kinetics by means of assesing temperature and relative humidity of the air inside the kiln. Smart-2 model allows to determine the diffusivity, being the average value of D for the drying cycle studied equal to 5.14 × 10−10 m2 s−1 and equal to 5.12 × 10−10 m2 s−1 for two experiments respectively. The multidistributed supervision of the dryer shows up the lack of uniformity in drying conditions supported by the wood planks located in the inner or center of the drying chamber where constant drying rate kinetics predominate. Finally, Smart-3 indicates a decreasing efficiency along the drying process from 0.9 to 0.

Effects of Changes in Surface Water Regime and/or Land Use on the Vertical Distribution of Water Available for Wetland Vegetation: Dynamic Model of the Zone of Aeration (Part 1 of Completion Report for Project A-023-ARK)

A mathematical model by Green, simulating one-dimensional vertical ground-water movement in unsaturated soils of the prairie region of Kansas, has been adapted for use in a wetlands environment typified by the wetlands forest of Eastern Arkansas. The model consists of two second-order, non-linear, partial differential equations and an algorithm for their numerical solution. The original model was extended to include functions for seasonal changes in transpiration and for drainage of excess precipitation. Before the addition of the two functions, the model reliability was limited to one growth season