Multilevel Converters: An Enabling Technology for High-Power Applications

| Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386

Grid-Connected Single-Star Bridge-Cells Modular Multilevel Cascaded Converter with Selective Harmonic Elimination Techniques

Nowadays, Renewable Energy Sources (RESs) are receiving enormous attention due to the noticeable exhaustion of fossil fuel and its emission of greenhouse gases. DC-AC converters have attracted the attention of the researchers, as they are entailed to integrate RESs to the grid to comply with the grid frequency and voltage requirements. Due to the high penetration of RESs, especially with elevated power levels, high-power converters are needed, which necessitates higher voltage and current ratings of the semiconductor devices. The unavailability of high voltage semiconductor devices has directed the attention to the use of either series connection of semiconductor devices or Multilevel Inverters (MLIs). MLIs allow using several low rated semiconductors to hold the high output power of the inverter. The MLI output waveform is close to sinusoidal in nature, therefore it may require a small filter to enhance the output power quality. There are many types of MLIs, where the most common MLIs are Flying Capacitor, Diode Clamped, and Modular Multilevel Cascaded Converter (MMCC). The MMCC can be classified into three main formations, the Single-Star Bridge-Cells MMCC (SSBC-MMCC), the Double-Star Bridge-Cells MMCC (DSBC-MMCC), and the Double-Star Chopper-Cells MMCC (DSCC-MMCC). The main advantage of the MMCC is the modularity and scalability. In addition, the MMCC does not require any clamping diodes or flying capacitors for clamping the voltage across the switches. In this thesis, the MMCC will be used to integrate high-power RESs to Grid. Nevertheless, the high-power applications necessitate low switching frequency operations. One of the most common controlling techniques of MLI with low frequency operation is the Selective Harmonic Elimination (SHE). SHE insures also the output current Total Harmonic Distortion (THD) to be minimized. One disadvantage of the SHE method is that the complexity of the algorithm along with the equations used is increased by the increase of the MMCC number of levels. Therefore, other alternatives of SHE techniques will be studied in this work to overcome this complexity. This thesis focuses typically on MMCC, particularly the SSBC-MMCC. In this work, a high-power grid-connected SSBC-MMCC is controlled with three different SHE techniques, complying with low switching frequency operation limitation in high-power applications. In addition to the Conventional SHE (C-SHE) technique, Quasi-SHE (Q-SHE) and Asymmetrical-SHE (A-SHE) approaches are proposed and assessed. Q-SHE and A-SHE approaches are based on eliminating selected low order harmonics (for instance, eliminating the fifth and seventh order harmonics), irrelevant to the number of employed levels provided that the number of levels allows for the required harmonic elimination. Compared with the C-SHE approach, the Q-SHE and A-SHE require less computational burden in solving the required equation groups, especially when a high number of levels and/or multiple switching angles for each voltage level are needed, while maintaining the same dv/dt of the output voltage. A 5MW, 17-level, grid-connected SSBC-MMCC, controlled in the synchronous rotating reference frame, is employed for assessing the addressed SHE techniques. The assessment is validated through simulation results using Matlab/Simulink platform

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters

Direct usage of photovoltaic solar panels to supply a freezer motor with variable DC input voltage

In this paper, a single-phase photovoltaic (PV) inverter fed by a boost converter to supply a freezer motor with variable DC input is investigated. The proposed circuit has two stages. Firstly, the DC output of the PV panel that varies between 150 and 300 V will be applied to the boost converter. The boost converter will boost the input voltage to a fixed 300 V DC. Next, this voltage is supplied to the single-phase full-bridge inverter to obtain 230 V AC. In the end, The output of the inverter will feed a freezer motor. The PV panels can be stand-alone or grid-connected. The grid-connected PV is divided into two categories, such as with a transformer and without a transformer, a transformer type has galvanic isolation resulting in increasing the security and also provides no further DC current toward the grid, but it is expensive, heavy and bulky. The transformerless type holds high efficiency and it is cheaper, but it suffers from leakage current between PV and the grid. This paper proposes a stand-alone direct use of PV to supply a freezer; therefore, no grid connection will result in no leakage current between the PV and Grid. The proposed circuit has some features such as no filtering circuit at the output of the inverter, no battery in the system, DC-link instead of AC link that reduces no-loads, having a higher efficiency, and holding enough energy in the DC-link capacitor to get the motor started. The circuit uses no transformers, thus, it is cheaper and has a smaller size. In addition, the system does not require a complex pulse width modulation (PWM) technique, because the motor can operate with a pulsed waveform. The control strategy uses the PWM signal with the desired timing. With this type of square wave, the harmonics (5th and 7th) of the voltage are reduced. The experimental and simulation results are presented to verify the feasibility of the proposed strategy