144,393 research outputs found
modelling and control of a free cooling system for data centers
Abstract Data centers are facilities hosting a large number of servers dedicated to data storage and management. In recent years, their power consumption has increased significantly due to the power density of the IT equipment. In particular, cooling represents approximately one third of the total electricity consumption, therefore efficiently cooling data centers has become a challenging problem and it represents an opportunity to reduce both IT energy costs and emissions environmental impact. The efficiency of computers room air conditioning (CRAC) systems can be increased using both advanced control techniques and new free cooling technologies, such as the indirect adiabatic cooling (IAC), that is the humidification of air under adiabatic conditions. Water sprinkled by spray nozzles humidifies and cools down the air taken from the outside, which then cools down the computers room air by means of a crossflow heat exchanger. In this way, the process air temperature is economically reduced and the cooling process is effective even when the outside temperature is warmer than that desired in the computers room. Beside the traditional approach, that improves energy efficiency of CRAC systems through advanced hardware design, nowadays advanced control systems offer the opportunity to improve both efficiency and performance by mostly acting on software components. In particular, a model-based paradigm can result very useful in the design of the controller. This approach involves three main steps: plant modelling, controller design, and simulations. In this paper, First-Principle Data-Driven (FPDD) techniques have been considered in the modelling phase, in order to obtain a model as simple as possible but accurate enough. All the main components of the plant, such as fans, spray nozzles, heat exchanger, and the computers room have been taken into account and they have been calibrated exploiting real data. The dynamics of the computers room variables (e.g. temperature) are slower than those of the components of the cooling system, due to higher thermal inertias of the computers room. Therefore, fans, heat exchanger, and spray nozzles are described by static models, whereas the computers room is described by a LTI dynamic model. Once obtained a model of the plant, a simulation environment based on Matlab/Simulink is designed accordingly. The developed control system is hierarchical: a supervisor determines the best combination of CRAC water and process air flows which minimizes the total power consumption, while satisfying the cooling demand. This system energy management problem is formulated as a non-linear optimization problem, subject to internal air condition requirements and system operating constraints. The optimization problem is repeatedly solved at each supervision period by using a population based stochastic optimization technique (Particle Swarm Optimization). Results of simulations show that the proposed control system is effective and minimizes the input electric power while satisfying both the data center thermal load and system operating constraints
Energy challenges for ICT
The energy consumption from the expanding use of information and communications technology (ICT) is unsustainable with present drivers, and it will impact heavily on the future climate change. However, ICT devices have the potential to contribute signi - cantly to the reduction of CO2 emission and enhance resource e ciency in other sectors, e.g., transportation (through intelligent transportation and advanced driver assistance systems and self-driving vehicles), heating (through smart building control), and manu- facturing (through digital automation based on smart autonomous sensors). To address the energy sustainability of ICT and capture the full potential of ICT in resource e - ciency, a multidisciplinary ICT-energy community needs to be brought together cover- ing devices, microarchitectures, ultra large-scale integration (ULSI), high-performance computing (HPC), energy harvesting, energy storage, system design, embedded sys- tems, e cient electronics, static analysis, and computation. In this chapter, we introduce challenges and opportunities in this emerging eld and a common framework to strive towards energy-sustainable ICT
Factory modelling: data guidance for analysing production, utility and building architecture systems
Work on energy and resource reduction in factories is dependent on the availability of data. Typically, available sources are incomplete or inappropriate for direct use and manipulation is required. Identifying new improvement opportunities through simulation across factory production, utility and building architecture domains requires analysis of model feasibility, particularly in terms of system data composition, input resolution and simulation result fidelity. This paper reviews literature on developing appropriate model data for assessing energy and material flows at factory level. Gaps are found in guidance for analysis and integration of resource-flows across system boundaries. The process for how data was prepared, input and iteratively developed alongside conceptual and simulation models is described. The case of a large-scale UK manufacturer is presented alongside discussions on challenges associated with factory level modelling, and the insights gained from understanding the effect of data clarity on system performance
Recommended from our members
A decision support system for fostering smart energy efficient districts
The role of ICT is becoming prominent in tackling some of the urban societal challenges such as energy
wastage and increasing carbon emissions. In this context, the concept of DAREED aims to deliver an
integrated decision support system (DSS) to drive energy efficiency and low carbon activities at both a
building and district level. The main aim of this paper is to present the technical concept of the Best
Practices recommendation component of the DAREED system. This component seeks to compare and
identify existing best practices to recommend practical actions to various stakeholders (e.g. building
managers, citizens) in order to improve energy performance considering the global needs of a building.
This paper also discusses the context of the three field trial sites (based in UK, Spain and Italy) in which
the DAREED platform along with the best practices tool is to be tested and validated.This work evolved in the context of the project DAREED (Decision support Advisor for innovative
business models and useR engagement for smart Energy Efficient Districts), www.dareed.eu, a project cofunded
by the EC within FP7, Grant agreement no: 609082
A collection of tools for factory eco-efficiency
co-efficiency is generally defined as doing more with less, aiming to decouple environmental impact from economic and social value creation.
This paper presents three tools to guide the implementation of eco-efficiency in factories: (1) definition and patterns of good practices for
sustainable manufacturing, (2) a self-assessment tool and maturity grid, and (3) a factory modelling framework
TANGO: Transparent heterogeneous hardware Architecture deployment for eNergy Gain in Operation
The paper is concerned with the issue of how software systems actually use
Heterogeneous Parallel Architectures (HPAs), with the goal of optimizing power
consumption on these resources. It argues the need for novel methods and tools
to support software developers aiming to optimise power consumption resulting
from designing, developing, deploying and running software on HPAs, while
maintaining other quality aspects of software to adequate and agreed levels. To
do so, a reference architecture to support energy efficiency at application
construction, deployment, and operation is discussed, as well as its
implementation and evaluation plans.Comment: Part of the Program Transformation for Programmability in
Heterogeneous Architectures (PROHA) workshop, Barcelona, Spain, 12th March
2016, 7 pages, LaTeX, 3 PNG figure
The EnTrak system : supporting energy action planning via the Internet
Recent energy policy is designed to foster better energy efficiency and assist with the deployment of clean energy systems, especially those derived from renewable energy sources. To attain the envisaged targets will require action at all levels and effective collaboration between disparate groups (e.g. policy makers, developers, local authorities, energy managers, building designers, consumers etc) impacting on energy and environment. To support such actions and collaborations, an Internet-enabled energy information system called 'EnTrak' was developed. The aim was to provide decision-makers with information on energy demands, supplies and impacts by sector, time, fuel type and so on, in support of energy action plan formulation and enactment. This paper describes the system structure and capabilities of the EnTrak system
- …