Compact thermal models of semiconductor devices – a review

In the paper the problem of modelling thermal properties of semiconductor devices with the use of compact models is presented. This class of models is defined and their development over the past dozens of years is described. Possibilities of modelling thermal phenomena both in discrete semiconductor devices, monolithic integrated circuits, power modules and selected electronic circuits are presented. The problem of the usefulness range of compact thermal models in the analysis of electronic elements and circuits is discussed on the basis of investigations performed in Gdynia Maritime University

Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Modelling and characterization of Quantum Dots as QLED devices for automotive lighting systems

This work reports the design, manufacturing and numerical simulation approach of an electroluminescent quantum dot light emitting device (QLED) based on quantum dots as an active layer. In addition, the electrical I-V curve was measured, observing how the fabrication process and layer thickness have an influence in the shape of the plot. This experimental device enabled us to create a computational model for the QLED based on the Transfer Hamiltonian approach to calculate the current density J(mA/cm2), the band diagram of the system and the accumulated charge distribution. Thanks to the QLED simulator developed, it would be possible to model the device and anticipate the electrical performance in a theoretical design step before going to QLED manufacturing at the laboratory. Eventually, particular automotive lighting system demonstrators were designed to integrate the theoretical and experimental research carried out in an industrial automotive product.Tesis Univ. Granada

Experimental proof of Joule heating-induced switched-back regions in OLEDs

Organic light-emitting diodes (OLEDs) have become a major pixel technology in the display sector, with products spanning the entire range of current panel sizes. The ability to freely scale the active area to large and random surfaces paired with flexible substrates provides additional application scenarios for OLEDs in the general lighting, automotive, and signage sectors. These applications require higher brightness and, thus, current density operation compared to the specifications needed for general displays. As extended transparent electrodes pose a significant ohmic resistance, OLEDs suffering from Joule self-heating exhibit spatial inhomogeneities in electrical potential, current density, and hence luminance. In this article, we provide experimental proof of the theoretical prediction that OLEDs will display regions of decreasing luminance with increasing driving current. With a two-dimensional OLED model, we can conclude that these regions are switched back locally in voltage as well as current due to insufficient lateral thermal coupling. Experimentally, we demonstrate this effect in lab-scale devices and derive that it becomes more severe with increasing pixel size, which implies its significance for large-area, high-brightness use cases of OLEDs. Equally, these non-linear switching effects cannot be ignored with respect to the long-term operation and stability of OLEDs; in particular, they might be important for the understanding of sudden-death scenarios

Light-emitting diodes from polyfluorenes: characterisation and stability of performance

This thesis deals with polymer light-emitting diodes (LEDs) containing materials from the polyfluorene family, and investigates their behaviour when employed in device structures. A study of poly(9,9’-dioctylfluorene-co-bis-N,N’-(4-butylphenyl)-bis-N,N’-phenyl-1,4-phenylenediamine) (PFB) by photothermal deflection spectroscopy (PDS) shows that the polymer undergoes a doping reaction with poly(styrene sulphonic acid). This is important because the two materials are found in intimate contact in LED structures. The conditions for reaction are investigated, and it is proposed that the reacted states are directly responsible for the drive-induced degradation of LEDs containing these two materials. LEDs are studied which contain various combinations of poly(9,9’-dioctylfluorene-co-N-(4-butylphenyl)diphenylamine) (TFB) and poly(9,9’-dioctylfluorene-co-benzothiadiazole) (F8BT), using pulsed electroluminescence. A strongly morphology-dependent spike-transient is observed in the electroluminescence at turn-on, and this is investigated by numerical modelling. Although not all features of the system can be well represented in the model, the spike transient is explicitly predicted without the need to impose any special conditions. The origin of this feature is elucidated by repeatedly running the model to a range of end-points and studying the time-evolution of space-charge distributions which result. Finally, F8BT devices are considered on their own, in order to study the evolution of device performance under low-intensity electrical excitation. A phenomenon is investigated in which the quantum efficiency is dramatically increased during the early stages of driving. Ionic motions are ruled out, and the observations are attributed to the trapping of charge in the vicinity of the anode, leading to enhanced hole injection. The reverse-bias behaviour of the effect, in which a further enhancement is seen, is also examined. The analogy is made with polymer LEDs in general which increase in performance following a period of reverse bias, and it is suggested that the causes may be related

Influence of thermal phenomena on dc characteristics of the IGBT

The paper concerns the study of the effect of thermal phenomena on characteristics of the IGBT. The used measurement set-ups and the results of measurements of dc characteristics of the selected transistor obtained under different cooling conditions are presented. The influence of the ambient temperature and the applied cooling system on the shape of these characteristics is discussed. In particular, attention has been paid to the untypical shape of non-isothermal characteristics of this element in the sub-threshold range

The 2019 materials by design roadmap

Advances in renewable and sustainable energy technologies critically depend on our ability to design and realize materials with optimal properties. Materials discovery and design efforts ideally involve close coupling between materials prediction, synthesis and characterization. The increased use of computational tools, the generation of materials databases, and advances in experimental methods have substantially accelerated these activities. It is therefore an opportune time to consider future prospects for materials by design approaches. The purpose of this Roadmap is to present an overview of the current state of computational materials prediction, synthesis and characterization approaches, materials design needs for various technologies, and future challenges and opportunities that must be addressed. The various perspectives cover topics on computational techniques, validation, materials databases, materials informatics, high-throughput combinatorial methods, advanced characterization approaches, and materials design issues in thermoelectrics, photovoltaics, solid state lighting, catalysts, batteries, metal alloys, complex oxides and transparent conducting materials. It is our hope that this Roadmap will guide researchers and funding agencies in identifying new prospects for materials design

POTEnCIA model description - version 0.9

This report lays out the modelling approach that is implemented in the POTEnCIA modelling tool (Policy Oriented Tool for Energy and Climate Change Impact Assessment) and describes its analytical capabilities. POTEnCIA is a modelling tool for the EU energy system that follows a hybrid partial equilibrium approach. It combines behavioural decisions with detailed techno-economic data, therefore allowing for an analysis of both technology-oriented policies and of those addressing behavioural change. Special features and mechanisms are introduced in POTEnCIA in order to appropriately reflect the implications of an uptake of novel energy technologies and of changing market structures, allowing for the robust assessment of ambitious policy futures for the EU energy system. The model runs on an annual basis with a typical projection timeline to 2050.JRC.J.1-Economics of Climate Change, Energy and Transpor