118,971 research outputs found
Fault Tolerant Adaptive Parallel and Distributed Simulation through Functional Replication
This paper presents FT-GAIA, a software-based fault-tolerant parallel and
distributed simulation middleware. FT-GAIA has being designed to reliably
handle Parallel And Distributed Simulation (PADS) models, which are needed to
properly simulate and analyze complex systems arising in any kind of scientific
or engineering field. PADS takes advantage of multiple execution units run in
multicore processors, cluster of workstations or HPC systems. However, large
computing systems, such as HPC systems that include hundreds of thousands of
computing nodes, have to handle frequent failures of some components. To cope
with this issue, FT-GAIA transparently replicates simulation entities and
distributes them on multiple execution nodes. This allows the simulation to
tolerate crash-failures of computing nodes. Moreover, FT-GAIA offers some
protection against Byzantine failures, since interaction messages among the
simulated entities are replicated as well, so that the receiving entity can
identify and discard corrupted messages. Results from an analytical model and
from an experimental evaluation show that FT-GAIA provides a high degree of
fault tolerance, at the cost of a moderate increase in the computational load
of the execution units.Comment: arXiv admin note: substantial text overlap with arXiv:1606.0731
Recommended from our members
Evaluating the resilience and security of boundaryless, evolving socio-technical Systems of Systems
Assessing and augmenting SCADA cyber security: a survey of techniques
SCADA systems monitor and control critical infrastructures of national importance such as power generation and distribution, water supply, transportation networks, and manufacturing facilities. The pervasiveness, miniaturisations and declining costs of internet connectivity have transformed these systems from strictly isolated to highly interconnected networks. The connectivity provides immense benefits such as reliability, scalability and remote connectivity, but at the same time exposes an otherwise isolated and secure system, to global cyber security threats. This inevitable transformation to highly connected systems thus necessitates effective security safeguards to be in place as any compromise or downtime of SCADA systems can have severe economic, safety and security ramifications. One way to ensure vital asset protection is to adopt a viewpoint similar to an attacker to determine weaknesses and loopholes in defences. Such mind sets help to identify and fix potential breaches before their exploitation. This paper surveys tools and techniques to uncover SCADA system vulnerabilities. A comprehensive review of the selected approaches is provided along with their applicability
Recommended from our members
Current capabilities, requirements and a proposed strategy for interdependency analysis in the UK
The UK government recently commissioned a research study to identify the state-of-the-art in Critical Infrastructure modelling and analysis, and the government/industry requirements for such tools and services. This study (Cetifs) concluded with a strategy aiming to bridge the gaps between the capabilities and requirements, which would establish interdependency analysis as a commercially viable service in the near future. This paper presents the findings of this study that was carried out by CSR, City University London, Adelard LLP, a safety/security consultancy and Cranfield University, defense academy of the UK
On cost-effective reuse of components in the design of complex reconfigurable systems
Design strategies that benefit from the reuse of system components can reduce costs while maintaining or increasing dependability—we use the term dependability to tie together reliability and availability. D3H2 (aDaptive Dependable Design for systems with Homogeneous and Heterogeneous redundancies) is a methodology that supports the design of complex systems with a focus on reconfiguration and component reuse. D3H2 systematizes the identification of heterogeneous redundancies and optimizes the design of fault detection and reconfiguration mechanisms, by enabling the analysis of design alternatives with respect to dependability and cost. In this paper, we extend D3H2 for application to repairable systems. The method is extended with analysis capabilities allowing dependability assessment of complex reconfigurable systems. Analysed scenarios include time-dependencies between failure events and the corresponding reconfiguration actions. We demonstrate how D3H2 can support decisions about fault detection and reconfiguration that seek to improve dependability while reducing costs via application to a realistic railway case study
Developing a distributed electronic health-record store for India
The DIGHT project is addressing the problem of building a scalable and highly available information store for the Electronic Health Records (EHRs) of the over one billion citizens of India
On Modelling and Analysis of Dynamic Reconfiguration of Dependable Real-Time Systems
This paper motivates the need for a formalism for the modelling and analysis
of dynamic reconfiguration of dependable real-time systems. We present
requirements that the formalism must meet, and use these to evaluate well
established formalisms and two process algebras that we have been developing,
namely, Webpi and CCSdp. A simple case study is developed to illustrate the
modelling power of these two formalisms. The paper shows how Webpi and CCSdp
represent a significant step forward in modelling adaptive and dependable
real-time systems.Comment: Presented and published at DEPEND 201
Power quality and electromagnetic compatibility: special report, session 2
The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems.
Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages).
The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks:
Block 1: Electric and Magnetic Fields, EMC, Earthing systems
Block 2: Harmonics
Block 3: Voltage Variation
Block 4: Power Quality Monitoring
Two Round Tables will be organised:
- Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13)
- Reliability Benchmarking - why we should do it? What should be done in future? (RT 15
- …