32,037 research outputs found
International conference on software engineering and knowledge engineering: Session chair
The Thirtieth International Conference on Software Engineering and Knowledge Engineering (SEKE 2018) will be held at the Hotel Pullman, San Francisco Bay, USA, from July 1 to July 3, 2018. SEKE2018 will also be dedicated in memory of Professor Lofti Zadeh, a great scholar, pioneer and leader in fuzzy sets theory and soft computing.
The conference aims at bringing together experts in software engineering and knowledge engineering to discuss on relevant results in either software engineering or knowledge engineering or both. Special emphasis will be put on the transference of methods between both domains. The theme this year is soft computing in software engineering & knowledge engineering. Submission of papers and demos are both welcome
Performance prediction tools for low impact building design
IT systems are emerging that may be used to support decisions relating to the design of a built enviroment that has low impact in terms of energy use and environmental emissions. This paper summarises this prospect in relation to four complementary application areas: digital cities, rational planning, virtual design and Internet energy services
Recommended from our members
A roadmap for China to peak carbon dioxide emissions and achieve a 20% share of non-fossil fuels in primary energy by 2030
As part of its Paris Agreement commitment, China pledged to peak carbon dioxide (CO2) emissions around 2030, striving to peak earlier, and to increase the non-fossil share of primary energy to 20% by 2030. Yet by the end of 2017, China emitted 28% of the world's energy-related CO2 emissions, 76% of which were from coal use. How China can reinvent its energy economy cost-effectively while still achieving its commitments was the focus of a three-year joint research project completed in September 2016. Overall, this analysis found that if China follows a pathway in which it aggressively adopts all cost-effective energy efficiency and CO2 emission reduction technologies while also aggressively moving away from fossil fuels to renewable and other non-fossil resources, it is possible to not only meet its Paris Agreement Nationally Determined Contribution (NDC) commitments, but also to reduce its 2050 CO2 emissions to a level that is 42% below the country's 2010 CO2 emissions. While numerous barriers exist that will need to be addressed through effective policies and programs in order to realize these potential energy use and emissions reductions, there are also significant local environmental (e.g., air quality), national and global environmental (e.g., mitigation of climate change), human health, and other unquantified benefits that will be realized if this pathway is pursued in China
Modeling the Internet of Things: a simulation perspective
This paper deals with the problem of properly simulating the Internet of
Things (IoT). Simulating an IoT allows evaluating strategies that can be
employed to deploy smart services over different kinds of territories. However,
the heterogeneity of scenarios seriously complicates this task. This imposes
the use of sophisticated modeling and simulation techniques. We discuss novel
approaches for the provision of scalable simulation scenarios, that enable the
real-time execution of massively populated IoT environments. Attention is given
to novel hybrid and multi-level simulation techniques that, when combined with
agent-based, adaptive Parallel and Distributed Simulation (PADS) approaches,
can provide means to perform highly detailed simulations on demand. To support
this claim, we detail a use case concerned with the simulation of vehicular
transportation systems.Comment: Proceedings of the IEEE 2017 International Conference on High
Performance Computing and Simulation (HPCS 2017
Collinsville solar thermal project: energy economics and dispatch forecasting (final report)
The primary aim of this report is to help negotiate a Power Purchase Agreement (PPA) for the proposed hybrid gas-Linear Frensel Reflector (LFR) plant at Collinsville, Queensland, Australia. The report’s wider appeal is the discussion of the current situation in Australian National Electricity Market (NEM) and techniques and methods used to model the NEM’s demand and wholesale spot prices for the lifetime of the proposed plant.
Executive Summary
1 Introduction
This report primarily aims to provide both dispatch and wholesale spot price forecasts for the proposed hybrid gas-solar thermal plant at Collinsville, Queensland, Australia for its lifetime 2017-47. These forecasts are to facilitate Power Purchase Agreement (PPA) negotiations and to evaluate the proposed dispatch profile in Table 3. The solar thermal component of the plant uses Linear Fresnel Reflector (LFR) technology. The proposed profile maintains a 30 MW dispatch during the weekdays by topping up the yield from the LFR by dispatch from the gas generator and imitates a baseload function currently provided by coal generators. This report is the second of two reports and uses the findings of our first report on yield forecasting (Bell, Wild & Foster 2014b).
2 Literature review
The literature review discusses demand and supply forecasts, which we use to forecast wholesale spot prices with the Australian National Electricity Market (ANEM) model.
The review introduces the concept of gross demand to supplement the Australian Electricity Market Operator’s (AEMO) “total demand”. This gross demand concept helps to explain the permanent transformation of the demand in the National Electricity Market (NEM) region and the recent demand over forecasting by the AEMO. We also discuss factors causing the permanent transformation. The review also discusses the implications of the irregular ENSO cycle for demand and its role in over forecasting demand.
Forecasting supply requires assimilating the information in the Electricity Statement of Opportunities (ESO) (AEMO 2013a, 2014c). AEMO expects a reserve surplus across the NEM beyond 2023-24. Compounding this reserve surplus, there is a continuing decline in manufacturing, which is freeing up supply capacity elsewhere in the NEM. The combined effect of export LNG prices and declining total demand are hampering decisions to transform proposed gas generation investment into actual investment and hampering the role for gas as a bridging technology in the NEM. The review also estimates expected lower and upper bounds for domestic gas prices to determine the sensitivity of the NEM’s wholesale spot prices and plant’s revenue to gas prices.
The largest proposed investment in the NEM is from wind generation but the low demand to wind speed correlation induces wholesale spot price volatility. However, McKinsey Global Institute (MGI 2014) and Norris et al. (2014a) expect economically viable energy storage shortly beyond the planning horizon of the ESO in 2023-24. We expect that this viability will not only defer investment in generation and transmission but also accelerate the growth in off-market produced and consumed electricity within the NEM region.
2.1 Research questions
The report has the following overarching research questions:
What is the expected dispatch of the proposed plant’s gas component given the plant’s dispatch profile and expected LFR yield?
What are the wholesale spots prices on the NEM given the plant’s dispatch profile?
The literature review refines the latter research question into five more specific research questions ready for the methodology:
What are the half-hourly wholesale spots prices for the plant’s lifetime without gas as a bridging technology?
Assuming a reference gas price of between 7.19/GJ for base-load gas generation (depending upon nodal location;) and
for peak-load gas generation of between 8.99/GJ; and
given the plant’s dispatch profile
What are the half-hourly wholesale spots prices for the plant’s lifetime with gas as a bridging technology?
Assuming some replacement of coal with gas generation
How sensitive are wholesale spot prices to higher gas prices?
Assuming high gas prices are between 9.71/GJ for base-load gas generation (depending upon nodal location); and
for peak-load gas generation of between 12.14/GJ; and
What is the plant’s revenue for the reference gas prices?
How sensitive is the plant’s revenue to gas as a bridging technology?
How sensitive is the plant’s revenue to the higher gas prices?
What is the levelised cost of energy for the proposed plant?
3 Methodology
In the methodology section, we discuss the following items:
dispatch forecasting for the proposed plant;
supply capacity for the years 2014-47 for the NEM;
demand forecasting using a Typical Meteorological Year (TMY); and
wholesale spot prices calculation using ANEM, supply capacity and total demand
define three scenarios to address the research questions:
reference gas prices;
gas as a bridging technology; and
high gas prices.
The TMY demand matches the solar thermal plant’s TMY yield forecast that we developed in our previous report (Bell, Wild & Foster 2014b). Together, these forecasts help address the research questions.
4 Results
In the results section we will present the findings for each research question, including
the TMY yield for the LFR and the dispatch of the gas generator given the proposed dispatch profile in Table 3;
Average annual wholesale spot prices from 2017 to 2047 for the plant’s node for:
Reference gas prices scenario from 38/MWh
Gas as a bridging technology scenario from 110/MWh
High gas price scenario from 41/MWh
The combined plants revenue without subsidy given the proposed profile:
Reference gas price scenario 52 million
High gas price scenario $47 million
5 Discussion
In the discussion section, we analyse:
reasons for the changes in the average annual spot prices for the three scenarios; and
the frequency that the half-hourly spot price exceeds the Short Run Marginal Cost (SRMC) of the gas generator for the three scenarios for:
day of the week;
month of the year; and
time of the day.
If the wholesale spot price exceeds the SRMC, dispatch from the gas plant contributes towards profits. Otherwise, the dispatch contributes towards a loss. We find that for both reference and high gas price scenarios the proposed profile in Table 3 captures exceedances for the day of the week and the time of the day but causes the plant to run at a loss for several months of the year. Figure 14 shows that the proposed profile captures the exceedance by hour of the day and Figure 16 shows that only operating the gas component Monday to Friday is well justified. However, Figure 15 shows that operating the gas plant in April, May, September and October is contributing toward a loss. Months either side of these four months have a marginal number of exceedances. In the unlikely case of gas as a bridging scenario, extending the proposed profile to include the weekend and operating from 6 am to midnight would contribute to profits.
We offer an alternative strategy to the proposed profile because the proposed profile in the most likely scenarios proves loss making when considering the gas component’s operation throughout the year. The gas-LFR plant imitating the based-load role of a coal generator takes advantage of the strengths of the gas and LFR component, that is, the flexibility of gas to compensate for the LFR’s intermittency, and utilising the LFR’s low SRMC. However, the high SRMC of the gas component in a baseload role loses the flexibility to respond to market conditions and contributes to loss instead of profit and to CO2 production during periods of low demand.
The alternative profile retains the advantages of the proposed profile but allows the gas component freedom to exploit market conditions. Figure 17 introduces the perfect day’s yield profile calculated from the maximum hourly yield from the years 2007-13. The gas generator tops up the actual LFR yield to the perfect day’s yield profile to cover LFR intermittency. The residual capacity of the gas generator is free to meet demand when spot market prices exceed SRMC and price spikes during Value-of-Lost-Load (VOLL) events. The flexibility of the gas component may prove more advantageous as the penetration of intermittent renewable energy increases.
6 Conclusion
We find that the proposed plant is a useful addition to the NEM but the proposed profile is unsuitable because the gas component is loss making for four months of the year and producing CO2 during periods of low demand. We recommend further research using the alternative perfect day’s yield profile.
7 Further Research
We discuss further research compiled from recommendation elsewhere in the report.
8 Appendix A Australian National Electricity Market Model Network
This appendix provides diagrams of the generation and load serving entity nodes and the transmission lines that the ANEM model uses. There are 52 nodes and 68 transmission lines, which make the ANEM model realistic. In comparison, many other models of the NEM are highly aggregated.
9 Appendix B Australian National Electricity Market Model
This appendix describes the ANEM model in detail and provides additional information on the assumptions made about the change in the generation fleet in the NEM during the lifetime of the proposed plant
Participatory Approach in Decision Making Processes for Water Resources Management in the Mediterranean Basin
This paper deals with the comparative analysis of different policy options for water resources management in three south-eastern Mediterranean countries. The applied methodology follows a participatory approach throughout its implementation and is supported by the use of three different software packages dealing with water allocation budget, water quality simulation, and Multi Criteria Analysis, respectively. The paper briefly describes the general objectives of the SMART project and then presents the three local case studies, the valuation objectives and the applied methodology - developed as a general replicable framework suitable for implementation in other decision-making processes. All the steps needed for a correct implementation are therefore described. Following the conceptualisation of the problem, the choice of the appropriate indicators as well as the calculation of their weighting and value functions are detailed. The paper concludes with the results of the Multi Criteria and the related Sensitivity Analyses performed, showing how the different policy responses under consideration can be assessed and furthermore compared through case studies thanks to their relative performances. The adopted methodology was found to be an effective operational approach for bridging scientific modelling and policy making by integrating the model outputs in a conceptual framework that can be understood and utilised by non experts, thus showing concrete potential for participatory decision making.Scientific Advice, Policy-Making, Participatory Modelling, Decision Support
Diverse perceptions of smart spaces
This is the era of smart technology and of ‘smart’ as a meme, so we have run three workshops to examine the ‘smart’ meme and the exploitation of smart environments. The literature relating to smart spaces focuses primarily on technologies and their capabilities. Our three workshops demonstrated that we require a stronger user focus if we are advantageously to exploit spaces ascribed as smart: we examined the concept of smartness from a variety of perspectives, in collaboration with a broad range of contributors. We have prepared this monograph mainly to report on the third workshop, held at Bournemouth University in April 2012, but do also consider the lessons learned from all three. We conclude with a roadmap for a fourth (and final) workshop, which is intended to emphasise the overarching importance of the humans using the spac
- …