Modelling fish habitat preference with a genetic algorithm-optimized Takagi-Sugeno model based on pairwise comparisons

Species-environment relationships are used for evaluating the current status of target species and the potential impact of natural or anthropogenic changes of their habitat. Recent researches reported that the results are strongly affected by the quality of a data set used. The present study attempted to apply pairwise comparisons to modelling fish habitat preference with Takagi-Sugeno-type fuzzy habitat preference models (FHPMs) optimized by a genetic algorithm (GA). The model was compared with the result obtained from the FHPM optimized based on mean squared error (MSE). Three independent data sets were used for training and testing of these models. The FHPMs based on pairwise comparison produced variable habitat preference curves from 20 different initial conditions in the GA. This could be partially ascribed to the optimization process and the regulations assigned. This case study demonstrates applicability and limitations of pairwise comparison-based optimization in an FHPM. Future research should focus on a more flexible learning process to make a good use of the advantages of pairwise comparisons

Risk of invasion predicted with support vector machines: A case study on northern pike (Esox Lucius, L.) and bleak (Alburnus alburnus, L.)

The impacts of invasive species are recognised as a major threat to global freshwater biodiversity. The risk of invasion (probability of presence) of two avowed invasive species, the northern pike (Esox Lucius, L.) and bleak (Alburnus alburnus, L.), was evaluated in the upper part of the Cabriel River (eastern Iberian Peninsula). Habitat suitability models for these invasive species were developed with Support Vector Machines (SVMs), which were trained with data collected downstream the Contreras dam (the last barrier impeding the invasion of the upper river segment). Although SVMs gained visibility in habitat suitability modelling, they cannot be considered widespread in ecology. Thus, with this technique, there is certain controversy about the necessity of performing variable selection procedures. In this study, the parameters tuning and the variable selection for the SVMs was simultaneously performed with a genetic algorithm and, contradicting previous studies in freshwater ecology, the variable selection proved necessary to achieve almost perfect accuracy. Further, the development of partial dependence plots allowed unveiling the relationship between the selected input variables and the probability of presence. Results revealed the preference of northern pike for large and wide mesohabitats with vegetated shores and abundant prey whereas bleak preferred deep and slightly fast flow mesohabitats with fine substrate. Both species proved able to colonize the upper part of the Cabriel River but the habitat suitability for bleak indicated a slightly higher risk of invasion. Altogether may threaten the endemic species that actually inhabit that stretch, especially the Jucar nase (Parachondrostoma arrigonis; Steindachner), which is one of the most critically endangered Iberian freshwater fish species. (C) 2016 Elsevier B.V. All rights reserved.The study has been partially funded by the IMPADAPT project (CGL2013-48424-C2-1-R) with Spanish MINECO (Ministerio de Economia y Competitividad) and by the Confederacion Hidrografica del Jucar (Spanish Ministry of Agriculture, Food and Environment). We also want to thank all the colleagues who worked in the field data collection, especially Rui M. S. Costa and Aina Hernandez. Finally, we are especially grateful to Esther Lopez Fernandez who kindly and selflessly posed for the graphical abstract.Muñoz Mas, R.; Vezza, P.; Alcaraz-Hernández, JD.; Martinez-Capel, F. (2016). Risk of invasion predicted with support vector machines: A case study on northern pike (Esox Lucius, L.) and bleak (Alburnus alburnus, L.). Ecological Modelling. 342:123-134. https://doi.org/10.1016/j.ecolmodel.2016.10.006S12313434

Experimental investigation and modelling of the heating value and elemental composition of biomass through artificial intelligence

Abstract: Knowledge advancement in artificial intelligence and blockchain technologies provides new potential predictive reliability for biomass energy value chain. However, for the prediction approach against experimental methodology, the prediction accuracy is expected to be high in order to develop a high fidelity and robust software which can serve as a tool in the decision making process. The global standards related to classification methods and energetic properties of biomass are still evolving given different observation and results which have been reported in the literature. Apart from these, there is a need for a holistic understanding of the effect of particle sizes and geospatial factors on the physicochemical properties of biomass to increase the uptake of bioenergy. Therefore, this research carried out an experimental investigation of some selected bioresources and also develops high-fidelity models built on artificial intelligence capability to accurately classify the biomass feedstocks, predict the main elemental composition (Carbon, Hydrogen, and Oxygen) on dry basis and the Heating value in (MJ/kg) of biomass...Ph.D. (Mechanical Engineering Science

Critical Thinking Skills Profile of High School Students In Learning Science-Physics

This study aims to describe Critical Thinking Skills high school students in the city of Makassar. To achieve this goal, the researchers conducted an analysis of student test results of 200 people scattered in six schools in the city of Makassar. The results of the quantitative descriptive analysis of the data found that the average value of students doing the interpretation, analysis, and inference in a row by 1.53, 1.15, and 1.52. This value is still very low when compared with the maximum value that may be obtained by students, that is equal to 10.00. This shows that the critical thinking skills of high school students are still very low. One fact Competency Standards science subjects-Physics is demonstrating the ability to think logically, critically, and creatively with the guidance of teachers and demonstrate the ability to solve simple problems in daily life. In fact, according to Michael Scriven stated that the main task of education is to train students and or students to think critically because of the demands of work in the global economy, the survival of a democratic and personal decisions and decisions in an increasingly complex society needs people who can think well and make judgments good. Therefore, the need for teachers in the learning device scenario such as: driving question or problem, authentic Investigation: Science Processes

New Trends in Environmental Engineering, Agriculture, Food Production, and Analysis

This Special Issue presents the latest advances in agriculture, aquaculture, food technology and environmental protection and engineering, discussing, among others, the following issues: new technologies in water, stormwater and wastewater treatment; water saving, lake restoration; new sludge and waste management systems; biodiesel production from animal fat waste; the microbiological quality of compound fish feeds for aquaculture; the role of technological processes to improve food quality and safety; new trends in the analysis of food and food components including in vitro, in vivo, and in silico analyses; and functional and structural aspects of bioactivities of food molecules

Safety and Reliability - Safe Societies in a Changing World

The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk managemen

Proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress

Published proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress, hosted by York University, 27-30 May 2018

Factors Influencing Customer Satisfaction towards E-shopping in Malaysia

Online shopping or e-shopping has changed the world of business and quite a few people have decided to work with these features. What their primary concerns precisely and the responses from the globalisation are the competency of incorporation while doing their businesses. E-shopping has also increased substantially in Malaysia in recent years. The rapid increase in the e-commerce industry in Malaysia has created the demand to emphasize on how to increase customer satisfaction while operating in the e-retailing environment. It is very important that customers are satisfied with the website, or else, they would not return. Therefore, a crucial fact to look into is that companies must ensure that their customers are satisfied with their purchases that are really essential from the ecommerce’s point of view. With is in mind, this study aimed at investigating customer satisfaction towards e-shopping in Malaysia. A total of 400 questionnaires were distributed among students randomly selected from various public and private universities located within Klang valley area. Total 369 questionnaires were returned, out of which 341 questionnaires were found usable for further analysis. Finally, SEM was employed to test the hypotheses. This study found that customer satisfaction towards e-shopping in Malaysia is to a great extent influenced by ease of use, trust, design of the website, online security and e-service quality. Finally, recommendations and future study direction is provided. Keywords: E-shopping, Customer satisfaction, Trust, Online security, E-service quality, Malaysia