A Survey of Green Networking Research

Reduction of unnecessary energy consumption is becoming a major concern in wired networking, because of the potential economical benefits and of its expected environmental impact. These issues, usually referred to as "green networking", relate to embedding energy-awareness in the design, in the devices and in the protocols of networks. In this work, we first formulate a more precise definition of the "green" attribute. We furthermore identify a few paradigms that are the key enablers of energy-aware networking research. We then overview the current state of the art and provide a taxonomy of the relevant work, with a special focus on wired networking. At a high level, we identify four branches of green networking research that stem from different observations on the root causes of energy waste, namely (i) Adaptive Link Rate, (ii) Interface proxying, (iii) Energy-aware infrastructures and (iv) Energy-aware applications. In this work, we do not only explore specific proposals pertaining to each of the above branches, but also offer a perspective for research.Comment: Index Terms: Green Networking; Wired Networks; Adaptive Link Rate; Interface Proxying; Energy-aware Infrastructures; Energy-aware Applications. 18 pages, 6 figures, 2 table

PowerPack: Energy Profiling and Analysis of High-Performance Systems and Applications

Energy efficiency is a major concern in modern high-performance computing system design. In the past few years, there has been mounting evidence that power usage limits system scale and computing density, and thus, ultimately system performance. However, despite the impact of power and energy on the computer systems community, few studies provide insight to where and how power is consumed on high-performance systems and applications. In previous work, we designed a framework called PowerPack that was the first tool to isolate the power consumption of devices including disks, memory, NICs, and processors in a high-performance cluster and correlate these measurements to application functions. In this work, we extend our framework to support systems with multicore, multiprocessor-based nodes, and then provide in-depth analyses of the energy consumption of parallel applications on clusters of these systems. These analyses include the impacts of chip multiprocessing on power and energy efficiency, and its interaction with application executions. In addition, we use PowerPack to study the power dynamics and energy efficiencies of dynamic voltage and frequency scaling (DVFS) techniques on clusters. Our experiments reveal conclusively how intelligent DVFS scheduling can enhance system energy efficiency while maintaining performance

BlackOut: Enabling fine-grained power gating of buffers in Network-on-Chip routers

The Network-on-Chip (NoC) router buffers play an instrumental role in the performance of both the interconnection fabric and the entire multi-/many-core system. Nevertheless, the buffers also constitute the major leakage power consumers in NoC implementations. Traditionally, they are designed to accommodate worst-case traffic scenarios, so they tend to remain idle, or under-utilized, for extended periods of time. The under-utilization of these valuable resources is exemplified when one profiles real application workloads; the generated traffic is bursty in nature, whereby high traffic periods are sporadic and infrequent, in general. The mitigation of the leakage power consumption of NoC buffers via power gating has been explored in the literature, both at coarse (router-level) and fine (buffer-level) granularities. However, power gating at the router granularity is suitable only for low and medium traffic conditions, where the routers have enough opportunities to be powered down. Under high traffic, the sleeping potential rapidly diminishes. Moreover, disabling an entire router greatly affects the NoC functionality and the network connectivity. This article presents BlackOut, a fine-grained power-gating methodology targeting individual router buffers. The goal is to minimize leakage power consumption, without adversely impacting the system performance. The proposed framework is agnostic of the routing algorithm and the network topology, and it is applicable to any router micro-architecture. Evaluation results obtained using both synthetic traffic patterns and real applications in 64-core systems indicate energy savings of up to 70%, as compared to a baseline NoC, with a near-negligible performance overhead of around 2%. BlackOut is also shown to significantly outperformby 35%, on averagetwo current state-of-the-art power-gating solutions, in terms of energy savings. Not tailored to any topology, routing algorithm and NoC router architecture.Router-to-router communication. No need for custom, region-based/global networks.Effective at low, medium and high traffic. Other solutions are more restrictive.+35% energy saving, on average, against two state-of-the-art power-gating solutions.Negligible performance overhead (+2%) compared to the baseline architecture

Energy aware approach for HPC systems

International audienceHigh‐performance computing (HPC) systems require energy during their full life cycle from design and production to transportation to usage and recycling/dismanteling. Because of increase of ecological and cost awareness, energy performance is now a primary focus. This chapter focuses on the usage aspect of HPC and how adapted and optimized software solutions could improve energy efficiency. It provides a detailed explanation of server power consumption, and discusses the application of HPC, phase detection, and phase identification. The chapter also suggests that having the load and memory access profiles is insufficient for an effective evaluation of the power consumed by an application. The available leverages in HPC systems are also shown in detail. The chapter proposes some solutions for modeling the power consumption of servers, which allows designing power prediction models for better decision making.These approaches allow the deployment and usage of a set of available green leverages, permitting energy reduction

Wireless model-based predictive networked control system over cooperative wireless network

Owing to their distributed architecture, networked control systems (NCSs) are proven to be feasible in scenarios where a spatially distributed feedback control system is required. Traditionally, such NCSs operate over real-time wired networks. Recently, in order to achieve the utmost flexibility, scalability, ease of deployment, and maintainability, wireless networks such as IEEE 802.11 wireless local area networks (LANs) are being preferred over dedicated wired networks. However, conventional NCSs with event-triggered controllers and actuators cannot operate over such general purpose wireless networks since the stability of the system is compromised due to unbounded delays and unpredictable packet losses that are typical in the wireless medium. Approaching the wireless networked control problem from two perspectives, this work introduces a practical wireless NCS and an implementation of a cooperative medium access control protocol that work jointly to achieve decent control under severe impairments, such as unbounded delay, bursts of packet loss and ambient wireless traffic. The proposed system is evaluated on a dedicated test platform under numerous scenarios and significant performance gains are observed, making cooperative communications a strong candidate for improving the reliability of industrial wireless networks

mDARAL: A Multi-Radio Version for the DARAL Routing Algorithm

Smart Cities are called to change the daily life of human beings. This concept permits improving the efficiency of our cities in several areas such as the use of water, energy consumption, waste treatment, and mobility both for people as well as vehicles throughout the city. This represents an interconnected scenario in which thousands of embedded devices need to work in a collaborative way both for sensing and modifying the environment properly. Under this scenario, the majority of devices will use wireless protocols for communicating among them, representing a challenge for optimizing the use of the electromagnetic spectrum. When the density of deployed nodes increases, the competition for using the physical medium becomes harder and, in consequence, traffic collisions will be higher, affecting data-rates in the communication process. This work presents mDARAL, a multi-radio routing algorithm based on the Dynamic and Adaptive Radio Algorithm (DARAL), which has the capability of isolating groups of nodes into sub-networks. The nodes of each sub-network will communicate among them using a dedicated radio frequency, thus isolating the use of the radio channel to a reduced number of nodes. Each sub-network will have a master node with two physical radios, one for communicating with its neighbours and the other for being the contact point among its group and other sub-networks. The communication among sub-networks is done through master nodes in a dedicated radio frequency. The algorithm works to maximize the overall performance of the network through the distribution of the traffic messages into unoccupied frequencies. The obtained results show that mDARAL achieves great improvement in terms of the number of control messages necessary to connect a node to the network, convergence time and energy consumption during the connection phase compared to DARAL

Datacenter Traffic Control: Understanding Techniques and Trade-offs

Datacenters provide cost-effective and flexible access to scalable compute and storage resources necessary for today's cloud computing needs. A typical datacenter is made up of thousands of servers connected with a large network and usually managed by one operator. To provide quality access to the variety of applications and services hosted on datacenters and maximize performance, it deems necessary to use datacenter networks effectively and efficiently. Datacenter traffic is often a mix of several classes with different priorities and requirements. This includes user-generated interactive traffic, traffic with deadlines, and long-running traffic. To this end, custom transport protocols and traffic management techniques have been developed to improve datacenter network performance. In this tutorial paper, we review the general architecture of datacenter networks, various topologies proposed for them, their traffic properties, general traffic control challenges in datacenters and general traffic control objectives. The purpose of this paper is to bring out the important characteristics of traffic control in datacenters and not to survey all existing solutions (as it is virtually impossible due to massive body of existing research). We hope to provide readers with a wide range of options and factors while considering a variety of traffic control mechanisms. We discuss various characteristics of datacenter traffic control including management schemes, transmission control, traffic shaping, prioritization, load balancing, multipathing, and traffic scheduling. Next, we point to several open challenges as well as new and interesting networking paradigms. At the end of this paper, we briefly review inter-datacenter networks that connect geographically dispersed datacenters which have been receiving increasing attention recently and pose interesting and novel research problems.Comment: Accepted for Publication in IEEE Communications Surveys and Tutorial