Modelling of radio wave propagation using Finite Element Analysis.

Fourth generation (4G) wireless communication systems are intended to support high data rates which requires careful and accurate modelling of the radio environment. In this thesis, for the first time finite clement based accurate and computationally efficient models of wave propagation in different outdoor and indoor environments has been developed. Three different environments were considered: the troposphere, vegetation and tunnels and wave propagation in these environments were modelled using finite element analysis. Use of finite elements in wave propagation modelling is a novel idea although many propagation models and approaches were used in past. Coverage diagrams, path loss contours and power levels were calculated using developed models in the troposphere, vegetation and tunnels. Results obtained were compared with commercially available software Advanced Refractive Effects Prediction Software (AREPS) to validate the accuracy of the developed approach and it is shown that results were accurate with an accuracy of 3dB. The developed models were very flexible in handling complex geometries and similar analysis can be easily extended to other environments. A fully vectored finite element base propagation model was developed for straight and curved tunnels. An optimum range of values of different electrical parameters for tunnels of different shapes has been derived. The thesis delivered a novel approach to modelling radio channels that provided a fast and accurate solution of radio wave propagation in realistic environments. The results of this thesis will have a great impact in modelling and characterisation of future wireless communication systems

Radio Wave Propagation in Arched Cross Section Tunnels - Simulations and Measurements

International audienceFor several years, wireless communication systems have been developed for train to infrastructure communication needs related to railway or mass transit applications. The systems should be able to operate in specific environments, such as tunnels. In this context, specific radio planning tools have to be developed to optimize system deployment. Realistic tunnels geometries are generally of rectangular cross section or arch-shaped. Furthermore, they are mostly curved. In order to calculate electromagnetic wave propagation in such tunnels, specific models have to be developed. Several works have dealt with retransmission of GSM or UMTS. Few theoretical or experimental works have focused on 2.4 GHz or 5.8 GHz bands. In this paper, we propose an approach to model radio wave propagation in these frequency bands in straight arch-shaped tunnels using tessellation in multi-facets. The model is based on a Ray Tracing tool using the image method. The work reported in this paper shows the propagation loss variations according to the shape of tunnels. A parametric study on the facets size to model the cross section is conducted. The influence of tunnel dimensions and signal frequency is examined. Finally, some measurement results in a straight arch-shaped tunnel are presented and analyzed in terms of slow and fast fading

Prof. James R. wait and mining production technology--an appreciation

Journal ArticleProf. James R. Wait examined electromagnetic (EM) wave propagation in many situations of interest to mining production, including propagation in tunnels, propagation along extended conductors such as cables and drill stems, and propagation in coal seams. This work remains relevant, both to the mining engineer interested in the EM environment of an operating mine and to the electrical engineer interested in verifying new computational techniques and in extending the scope of EM technology in mining production. Late work in EM focusing in a geological environment is relevant to "next generation" geophysical monitoring equipment

Channel Capacities for Different Antenna Arrays with Various Transmitting Angles in Tunnels

[[abstract]]This paper focuses on the research of channel capacity of multiple-input multipleoutput (MIMO) system with different transmitting angles in straight and curvy tunnels.Araytracing technique is developed to calculate channel frequency responses for tunnels, and the channel frequency response is further used to calculate corresponding channel capacity. The channel capacities are calculated based on the realistic environment. The channel capacities of MIMO long term evolution system using spatial and polar antenna arrays by different transmitting angles are computed. Numerical results show that, The channel capacity for transmitting angle at 15◦ is largest compared to the other angles in the tunnels. Moreover, the channel capacity of polar array is better than that of spatial array both in the straight and curvy tunnels. Besides, the channel capacity for the tunnels with traffic is larger than that without traffic. Finally, it isworth noting that in these cases the presentwork provides not only comparative information but also quantitative information on the performance reduction.[[notice]]補正完畢[[incitationindex]]SC

Viability of Numerical Full-Wave Techniques in Telecommunication Channel Modelling

In telecommunication channel modelling the wavelength is small compared to the physical features of interest, therefore deterministic ray tracing techniques provide solutions that are more efficient, faster and still within time constraints than current numerical full-wave techniques. Solving fundamental Maxwell's equations is at the core of computational electrodynamics and best suited for modelling electrical field interactions with physical objects where characteristic dimensions of a computing domain is on the order of a few wavelengths in size. However, extreme communication speeds, wireless access points closer to the user and smaller pico and femto cells will require increased accuracy in predicting and planning wireless signals, testing the accuracy limits of the ray tracing methods. The increased computing capabilities and the demand for better characterization of communication channels that span smaller geographical areas make numerical full-wave techniques attractive alternative even for larger problems. The paper surveys ways of overcoming excessive time requirements of numerical full-wave techniques while providing acceptable channel modelling accuracy for the smallest radio cells and possibly wider. We identify several research paths that could lead to improved channel modelling, including numerical algorithm adaptations for large-scale problems, alternative finite-difference approaches, such as meshless methods, and dedicated parallel hardware, possibly as a realization of a dataflow machine

MATLAB and K-Wave Based Outdoor Ray Propagation Predictor Tool SNELLIX for Surface Wave Modelling

This paper discusses the overview of ground wave propagation and addresses a particular class of propagation scenarios in the presence of surface terrain and atmospheric refractivity. Traditional methods used to predict the ground-wave field strength at low frequency and are not applicable for terrains with serious irregularities because of the analytical approximations. A virtual propagation MATLAB based predictor tool SNELLIX is developed for propagation of EM waves over non-flat terrain through homogeneous and an inhomogeneous atmosphere. Keywords: Wave propagation, ray tracing, tri linear refractivity, ducting, anomalous propagation, PWE, HFSW