A framework for traffic flow survivability in wireless networks prone to multiple failures and attacks

Transmitting packets over a wireless network has always been challenging due to failures that have always occurred as a result of many types of wireless connectivity issues. These failures have caused significant outages, and the delayed discovery and diagnostic testing of these failures have exacerbated their impact on servicing, economic damage, and social elements such as technological trust. There has been research on wireless network failures, but little on multiple failures such as node-node, node-link, and link–link failures. The problem of capacity efficiency and fast recovery from multiple failures has also not received attention. This research develops a capacity efficient evolutionary swarm survivability framework, which encompasses enhanced genetic algorithm (EGA) and ant colony system (ACS) survivability models to swiftly resolve node-node, node-link, and link-link failures for improved service quality. The capacity efficient models were tested on such failures at different locations on both small and large wireless networks. The proposed models were able to generate optimal alternative paths, the bandwidth required for fast rerouting, minimized transmission delay, and ensured the rerouting path fitness and good transmission time for rerouting voice, video and multimedia messages. Increasing multiple link failures reveal that as failure increases, the bandwidth used for rerouting and transmission time also increases. This implies that, failure increases bandwidth usage which leads to transmission delay, which in turn slows down message rerouting. The suggested framework performs better than the popular Dijkstra algorithm, proactive, adaptive and reactive models, in terms of throughput, packet delivery ratio (PDR), speed of transmission, transmission delay and running time. According to the simulation results, the capacity efficient ACS has a PDR of 0.89, the Dijkstra model has a PDR of 0.86, the reactive model has a PDR of 0.83, the proactive model has a PDR of 0.83, and the adaptive model has a PDR of 0.81. Another performance evaluation was performed to compare the proposed model's running time to that of other evaluated routing models. The capacity efficient ACS model has a running time of 169.89ms on average, while the adaptive model has a running time of 1837ms and Dijkstra has a running time of 280.62ms. With these results, capacity efficient ACS outperforms other evaluated routing algorithms in terms of PDR and running time. According to the mean throughput determined to evaluate the performance of the following routing algorithms: capacity efficient EGA has a mean throughput of 621.6, Dijkstra has a mean throughput of 619.3, proactive (DSDV) has a mean throughput of 555.9, and reactive (AODV) has a mean throughput of 501.0. Since Dijkstra is more similar to proposed models in terms of performance, capacity efficient EGA was compared to Dijkstra as follows: Dijkstra has a running time of 3.8908ms and EGA has a running time of 3.6968ms. In terms of running time and mean throughput, the capacity efficient EGA also outperforms the other evaluated routing algorithms. The generated alternative paths from these investigations demonstrate that the proposed framework works well in preventing the problem of data loss in transit and ameliorating congestion issue resulting from multiple failures and server overload which manifests when the process hangs. The optimal solution paths will in turn improve business activities through quality data communications for wireless service providers.School of ComputingPh. D. (Computer Science

Distributed Failure Restoration for Asynchronous Transfer Mode (ATM) Tactical Communication Networks

Asynchronous Transfer Mode (A TM) is an attractive choice for future military communication systems because it can provide high throughput and support multi-service applications. Furthermore its use is consistent with the 'off the shelf technology policy that is currently operated by the Defence Engineering Research Agency of Great Britain. However, A TM has been developed as a civil standard and is designed to operate in network infrastructures with very low failure rates. In contrast, tactical networks are much less reliable. Indeed tactical networks operate on the premise that failures, particularly node failures, are expected. Hence, efficient, automatic failure restoration schemes are essential if an A TM based tactical network is to remain operational. The main objective of this research is the proposal and verification of one or more new restoration algorithms that meet the specific requirements of tactical networks. The aspects of ATM networks that influence restoration algorithms' implementation are discussed. In particular, the features of A TM networks such as the concept of Virtual Paths Virtual Channels and OAM (Operation And Maintenance) mechanisms that facilitate implementation of efficient restoration techniques. The unique characteristics of tactical networks and their impact on restoration are also presented. A significant part of the research was the study and evaluation of existing approaches to failure restoration in civil networks. A critical analysis of the suitability of these approaches to the tactical environment shows no one restoration algorithm fully meets the requirements of tactical networks. Consequently, two restoration algorithms for tactical A TM networks, DRA-TN (Dynamic Restoration Algorithm for Tactical Networks) and PPR-TN (Pre-planned Restoration Algorithm for Tactical Networks), are proposed and described in detail. Since the primary concern of restoration in tactical networks is the recovery of high priority connections the proposed algorithms attempt to restore high-priority connections by disrupting low-priority calls. Also, a number of additional mechanisms are proposed to reduce the use of bandwidth, which is a scarce resource in tactical networks. It is next argued that software simulation is the most appropriate method to prove the consistency of the proposed algorithms, assess their performance and test them on different network topologies as well as traffic and failure conditions. For this reason a simulation software package was designed and built specifically to model the proposed restoration algorithms. The design of the package is presented in detail and the most important implementation issues are discussed. The proposed restoration algorithms are modelled on three network topologies under various traffic loads, and their performance compared against the performance of known algorithms proposed for civil networks. It is shown that DRA-TN and PPR-TN provide better restoration of higher priority traffic. Furthermore, as the traffic load increases the relative performance of the DRA-TN and PPR-TN algorithms increases. The DRA-TN and PPR-TN algorithms are also compared and their advantages and disadvantages noted. Also, recommendations are given about the applicability of the proposed algorithms, and some practical implementation issues are discussed. The number of problems that need further study are briefly described.Defence Engineering Research Agency of Great Britai

Survivable mesh-network design & optimization to support multiple QoP service classes

Every second, vast amounts of data are transferred over communication systems around the world, and as a result, the demands on optical infrastructures are extending beyond the traditional, ring-based architecture. The range of content and services available from the Internet is increasing, and network operations are constantly under pressure to expand their optical networks in order to keep pace with the ever increasing demand for higher speed and more reliable links

Multi-layer survivability in IP-over-WDM networks

Ph.DDOCTOR OF PHILOSOPH

On IP over WDM burst-switched long haul and metropolitan area networks

The IP over Wavelength Division Multiplexing (WDM) network is a natural evolution ushered in by the phenomenal advances in networking technologies and technical breakthroughs in optical communications, fueled by the increasing demand in the reduction of operation costs and the network management complexity. The unprecedented bandwidth provisioning capability and the multi-service supportability of the WDM technology, in synergy with the data-oriented internetworking mechanisms, facilitates a common shared infrastructure for the Next Generation Internet (NGJ). While NGI targets to perform packet processing directly on the optical transport layer, a smooth evolution is critical to success. Intense research has been conducted to design the new generation optical networks that retain the advantages of packet-oriented transport prototypes while rendering elastic network resource utilization and graded levels of service. This dissertation is focused on the control architecture, enabling technologies, and performance analysis of the WDM burst-switched long haul and Metropolitan Area Networks (MANs). Theoretical analysis and simulation results are reported to demonstrate the system performance and efficiency of proposed algorithms. A novel transmission mechanism, namely, the Forward Resource Reservation (ERR) mechanism, is proposed to reduce the end-to-end delay for an Optical Burst Switching (OBS)-based IP over WDM system. The ERR scheme adopts a Linear Predictive Filter and an aggressive reservation strategy for data burst length prediction and resource reservation, respectively, and is extended to facilitate Quality of Service (QoS) differentiation at network edges. The ERR scheme improves the real-time communication services for applications with time constraints without deleterious system costs. The aggressive strategy for channel holding time reservations is proposed. Specifically, two algorithms, the success probability-driven (SPD) and the bandwidth usage-driven (BUD) ones, are proposed for resource reservations in the FRRenabled scheme. These algorithms render explicit control on the latency reduction improvement and bandwidth usage efficiency, respectively, both of which are important figures of performance metrics. The optimization issue for the FRR-enabled system is studied based on two disciplines - addressing the static and dynamic models targeting different desired objectives (in terms of algorithm efficiency and system performance), and developing a \u27\u27crank back\u27\u27 based signaling mechanism to provide bandwidth usage efficiency. The proposed mechanisms enable the network nodes to make intelligent usage of the bandwidth resources. In addition, a new control architecture with enhanced address resolution protocol (E-ARP), burst-based transmission, and hop-based wavelength allocation is proposed for Ethernet-supported IP over WDM MANs. It is verified, via theoretical analysis and simulation results, that the E-ARP significantly reduces the call setup latency and the transmission requirements associated with the address probing procedures; the burst-based transport mechanism improves the network throughput and resource utilization; and the hop-based wavelength allocation algorithm provides bandwidth multiplexing with fairness and high scalability. The enhancement of the Ethernet services, in tandem with the innovative mechanisms in the WDM domain, facilitates a flexible and efficient integration, thus making the new generation optical MAN optimized for the scalable, survivable, and IP-dominated network at gigabit speed possible

Dimensionamento de redes ópticas multicamada

Doutoramento em Engenharia ElectrónicaEste trabalho apresenta um estudo sobre o dimensionamento de redes ópticas, com vistas a obter um modelo de dimensionamento para redes de transporte sobreviventes. No estudo utilizou-se uma abordagem estatística em detrimento à determinística. Inicialmente, apresentam-se as principais tecnologias e diferentes arquitecturas utilizadas nas redes ópticas de transporte. Bem como os principais esquemas de sobrevivência e modos de transporte. São identificadas variáveis necessárias e apresenta-se um modelo dimensionamento para redes de transporte, tendo-se dado ênfase às redes com topologia em malha e considerando os modos de transporte opaco, transparente e translúcido. É feita uma análise rigorosa das características das topologias de redes de transporte reais, e desenvolve-se um gerador de topologias de redes de transporte, para testar a validade dos modelos desenvolvidos. Também é implementado um algoritmo genético para a obtenção de uma topologia optimizada para um dado tráfego. São propostas expressões para o cálculo de variáveis não determinísticas, nomeadamente, para o número médio de saltos de um pedido, coeficiente de protecção e coeficiente de restauro. Para as duas últimas, também é analisado o impacto do modelo de tráfego. Verifica-se que os resultados obtidos pelas expressões propostas são similares às obtidas por cálculo numérico, e que o modelo de tráfego não influencia significativamente os valores obtidos para os coeficientes. Finalmente, é demonstrado que o modelo proposto é útil para o dimensionamento e cálculo dos custos de capital de redes com informação incompleta.This work presents a study on the dimensioning of optical networks, aiming to obtain a dimensioning model for survivable optical transport networks. The study relies on a statistical approach rather than a deterministic approach. Initially, enabling technologies and different architectures usually employed in optical transport networks are presented. The main survivability schemes and transport modes are also presented. Useful variables are identified and a transport network dimensioning model is presented, with emphasis on mesh-based network topologies, and considering opaque, transparent and translucent transport modes. A rigorous analysis on the characteristics of real-world transport networks is done, and a topology generator is developed. The topology generator is used for testing and validating the developed models. A genetic algorithm for obtaining an optimized topology for a given traffic load is implemented as well. Expressions for calculating non-deterministic variables are proposed, namely for the average number of hops per demand, protection and restoration coefficient. For the last two, the impact of the traffic model was analyzed. It is shown that results obtained from the proposed expressions are quite similar to the ones obtained from numeric calculation. Moreover, the traffic model does not influence significantly the values obtained for the coefficients. Finally, it is shown that the proposed model is useful for the dimensioning and calculation of capital expenditures of networks in absence of complete information.FCT - SFRH/BD/27545/200