DLWUC: Distance and Load Weight Updated Clustering-Based Clock Distribution for SOC Architecture

High-clock skew variations and degradation of driving ability of buffers lead to an additional power dissipation in Clock Distribution Network (CDN) that increases the dimensionality of buffers and coordination among flip-flops. The manual threshold level to predict the Region of Interest (ROI) is not applicable in clustering process due to the complexities of excessive wire length and critical delay. This paper proposes the Distance and Load Weight Updated Clustering (DLWUC) to determine the suitable position of logical components. Initially, the DLWUC utilizes the Hybrid Weighted Distance (HWD) to estimate the distance and construct the distance matrix. The weight value extracted from the sorted distance matrix facilitates the projection of buffers. The updated weight value serves as the base for clustering with labeled outputs. The placement of buffer at the suitable place from load weight updated clustering provides the necessary trade-off between clock provision and load balance. The DLWUC discussed in this paper reduces the size of buffers, skew, power and latency compared to the existing topologies

Low-power switched capacitor voltage reference

Low-power analog design represents a developing technological trend as it emerges from a rather limited range of applications to a much wider arena affecting mainstream market segments. It especially affects portable electronics with respect to battery life, performance, and physical size. Meanwhile, low-power analog design enables technologies such as sensor networks and RFID. Research opportunities abound to exploit the potential of low power analog design, apply low-power to established fields, and explore new applications. The goal of this effort is to design a low-power reference circuit that delivers an accurate reference with very minimal power consumption. The circuit and device level low-power design techniques are suitable for a wide range of applications. To meet this goal, switched capacitor bandgap architecture was chosen. It is the most suitable for developing a systematic, and groundup, low-power design approach. In addition, the low-power analog cell library developed would facilitate building a more complex low-power system. A low-power switched capacitor bandgap was designed, fabricated, and fully tested. The bandgap generates a stable 0.6-V reference voltage, in both the discrete-time and continuous-time domain. The system was thoroughly tested and individual building blocks were characterized. The reference voltage is temperature stable, with less than a 100 ppm/°C drift, over a --60 dB power supply rejection, and below a 1 [Mu]A total supply current (excluding optional track-and-hold). Besides using it as a voltage reference, potential applications are also described using derivatives of this switched capacitor bandgap, specifically supply supervisory and on-chip thermal regulation

Ultra-high-resolution optical imaging for silicon integrated-circuit inspection

This thesis concerns the development of novel resolution-enhancing optical techniques for the purposes of non-destructive sub-surface semiconductor integrated-circuit (IC) inspection. This was achieved by utilising solid immersion lens (SIL) technology, polarisation-dependent imaging, pupil-function engineering and optical coherence tomography (OCT). A SIL-enhanced two-photon optical beam induced current (TOBIC) microscope was constructed for the acquisition of ultra-high-resolution two- and three-dimensional images of a silicon flip-chip using a 1.55μm modelocked Er:fibre laser. This technology provided diffraction-limited lateral and axial resolutions of 166nm and 100nm, respectively - an order of magnitude improvement over previous TOBIC imaging work. The ultra-high numerical aperture (NA) provided by SIL-imaging in silicon (NA=3.5) was used to show, for the first time, the presence of polarisation-dependent vectorialfield effects in an image. These effects were modelled using vector diffraction theory to confirm the increasing ellipticity of the focal-plane energy density distribution as the NA of the system approaches unity. An unprecedented resolution performance ranging from 240nm to ~100nm was obtained, depending of the state of polarisation used. The resolution-enhancing effects of pupil-function engineering were investigated and implemented into a nonlinear polarisation-dependent SIL-enhanced laser microscope to demonstrate a minimum resolution performance of 70nm in a silicon flip-chip. The performance of the annular apertures used in this work was modelled using vectorial diffraction theory to interpret the experimentally-obtained images. The development of an ultra-high-resolution high-dynamic-range OCT system is reported which utilised a broadband supercontinuum source and a balanced-detection scheme in a time-domain Michelson interferometer to achieve an axial resolution of 2.5μm (in air). The examination of silicon ICs demonstrated both a unique substrate profiling and novel inspection technology for circuit navigation and characterisation. In addition, the application of OCT to the investigation of artwork samples and contemporary banknotes is demonstrated for the purposes of art conservation and counterfeit prevention

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Reliability Analysis of Electrotechnical Devices

This is a book on the practical approaches of reliability to electrotechnical devices and systems. It includes the electromagnetic effect, radiation effect, environmental effect, and the impact of the manufacturing process on electronic materials, devices, and boards