SimSched: A tool for Simulating Autosar Implementaion in Simulink

AUTOSAR (AUTomotive Open System ARchitecture) is an open industry standard for the automotive sector. It defines the three-layered automotive software architecture. One of these layers is the application layer, where functional behaviors are encapsulated in Software Components (SW-Cs). Inside SW-Cs, a set of runnable entities represents the internal behavior and is realized as a set of tasks. To address AUTOSAR's lack of support for modeling behaviors of runnables, languages such as Simulink are employed. Simulink simulations assume Simulink block behaviors are completed in zero execution time, while real execution requires a finite execution time. This timing mismatch can result in failures to detect unexpected runtime behaviors during the simulation phase. This paper extends the Simulink environment to model the timing properties of tasks. We present a Simulink block that can schedule tasks with non-zero simulation times. It enables a more realistic analysis during model development.Comment: 21 page

Hardware-Software Co-Design, Acceleration and Prototyping of Control Algorithms on Reconfigurable Platforms

Differential equations play a significant role in many disciplines of science and engineering. Solving and implementing Ordinary Differential Equations (ODEs) and partial Differential Equations (PDEs) effectively are very essential as most complex dynamic systems are modeled based on these equations. High Performance Computing (HPC) methodologies are required to compute and implement complex and data intensive applications modeled by differential equations at higher speed. There are, however, some challenges and limitations in implementing dynamic system, modeled by non-linear ordinary differential equations, on digital hardware. Modeling an integrator involves data approximation which results in accuracy error if data values are not considered properly. Accuracy and precision are dependent on the data types defined for each block of a system and subsystems. Also, digital hardware mostly works on fixed point data which leads to some data approximations. Using Field Programmable Gate Array (FPGA), it is possible to solve ordinary differential equations (ODE) at high speed. FPGA also provides scalable, flexible and reconfigurable features. The goal of this thesis is to explore and compare implementation of control algorithms on reconfigurable logic. This thesis focuses on implementing control algorithms modeled by second and fourth order PDEs and ODEs using Xilinx System Generator (XSG) and LabVIEW FPGA module synthesis tools. Xilinx System Generator for DSP allows integration of legacy HDL code, embedded IP cores, MATLAB functions, and hardware components targeted for Xilinx FPGAs to create complete system models that can be simulated and synthesized within the Simulink environment. The National Instruments (NI) LabVIEW FPGA Module extends LabVIEW graphical development to Field-Programmable Gate Arrays (FPGAs) on NI Reconfigurable I/O hardware. This thesis also focuses on efficient implementation and performance comparison of these implementations. Optimization of area, latency and power has also been explored during implementation and comparison results are discussed

Approaching the theoretical limits of a mesh NoC with a 16-node chip prototype in 45nm SOI

In this paper, we present a case study of our chip prototype of a 16-node 4x4 mesh NoC fabricated in 45nm SOI CMOS that aims to simultaneously optimize energy-latency-throughput for unicasts, multicasts and broadcasts. We first define and analyze the theoretical limits of a mesh NoC in latency, throughput and energy, then describe how we approach these limits through a combination of microarchitecture and circuit techniques. Our 1.1V 1GHz NoC chip achieves 1-cycle router-and-link latency at each hop and energy-efficient router-level multicast support, delivering 892Gb/s (87.1% of the theoretical bandwidth limit) at 531.4mW for a mixed traffic of unicasts and broadcasts. Through this fabrication, we derive insights that help guide our research, and we believe, will also be useful to the NoC and multicore research community

Vector coprocessor sharing techniques for multicores: performance and energy gains

Vector Processors (VPs) created the breakthroughs needed for the emergence of computational science many years ago. All commercial computing architectures on the market today contain some form of vector or SIMD processing. Many high-performance and embedded applications, often dealing with streams of data, cannot efficiently utilize dedicated vector processors for various reasons: limited percentage of sustained vector code due to substantial flow control; inherent small parallelism or the frequent involvement of operating system tasks; varying vector length across applications or within a single application; data dependencies within short sequences of instructions, a problem further exacerbated without loop unrolling or other compiler optimization techniques. Additionally, existing rigid SIMD architectures cannot tolerate efficiently dynamic application environments with many cores that may require the runtime adjustment of assigned vector resources in order to operate at desired energy/performance levels. To simultaneously alleviate these drawbacks of rigid lane-based VP architectures, while also releasing on-chip real estate for other important design choices, the first part of this research proposes three architectural contexts for the implementation of a shared vector coprocessor in multicore processors. Sharing an expensive resource among multiple cores increases the efficiency of the functional units and the overall system throughput. The second part of the dissertation regards the evaluation and characterization of the three proposed shared vector architectures from the performance and power perspectives on an FPGA (Field-Programmable Gate Array) prototype. The third part of this work introduces performance and power estimation models based on observations deduced from the experimental results. The results show the opportunity to adaptively adjust the number of vector lanes assigned to individual cores or processing threads in order to minimize various energy-performance metrics on modern vector- capable multicore processors that run applications with dynamic workloads. Therefore, the fourth part of this research focuses on the development of a fine-to-coarse grain power management technique and a relevant adaptive hardware/software infrastructure which dynamically adjusts the assigned VP resources (number of vector lanes) in order to minimize the energy consumption for applications with dynamic workloads. In order to remove the inherent limitations imposed by FPGA technologies, the fifth part of this work consists of implementing an ASIC (Application Specific Integrated Circuit) version of the shared VP towards precise performance-energy studies involving high- performance vector processing in multicore environments

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Improving Model-Based Software Synthesis: A Focus on Mathematical Structures

Computer hardware keeps increasing in complexity. Software design needs to keep up with this. The right models and abstractions empower developers to leverage the novelties of modern hardware. This thesis deals primarily with Models of Computation, as a basis for software design, in a family of methods called software synthesis. We focus on Kahn Process Networks and dataflow applications as abstractions, both for programming and for deriving an efficient execution on heterogeneous multicores. The latter we accomplish by exploring the design space of possible mappings of computation and data to hardware resources. Mapping algorithms are not at the center of this thesis, however. Instead, we examine the mathematical structure of the mapping space, leveraging its inherent symmetries or geometric properties to improve mapping methods in general. This thesis thoroughly explores the process of model-based design, aiming to go beyond the more established software synthesis on dataflow applications. We starting with the problem of assessing these methods through benchmarking, and go on to formally examine the general goals of benchmarks. In this context, we also consider the role modern machine learning methods play in benchmarking. We explore different established semantics, stretching the limits of Kahn Process Networks. We also discuss novel models, like Reactors, which are designed to be a deterministic, adaptive model with time as a first-class citizen. By investigating abstractions and transformations in the Ohua language for implicit dataflow programming, we also focus on programmability. The focus of the thesis is in the models and methods, but we evaluate them in diverse use-cases, generally centered around Cyber-Physical Systems. These include the 5G telecommunication standard, automotive and signal processing domains. We even go beyond embedded systems and discuss use-cases in GPU programming and microservice-based architectures

Co-simulation techniques based on virtual platforms for SoC design and verification in power electronics applications

En las últimas décadas, la inversión en el ámbito energético ha aumentado considerablemente. Actualmente, existen numerosas empresas que están desarrollando equipos como convertidores de potencia o máquinas eléctricas con sistemas de control de última generación. La tendencia actual es usar System-on-chips y Field Programmable Gate Arrays para implementar todo el sistema de control. Estos dispositivos facilitan el uso de algoritmos de control más complejos y eficientes, mejorando la eficiencia de los equipos y habilitando la integración de los sistemas renovables en la red eléctrica. Sin embargo, la complejidad de los sistemas de control también ha aumentado considerablemente y con ello la dificultad de su verificación. Los sistemas Hardware-in-the-loop (HIL) se han presentado como una solución para la verificación no destructiva de los equipos energéticos, evitando accidentes y pruebas de alto coste en bancos de ensayo. Los sistemas HIL simulan en tiempo real el comportamiento de la planta de potencia y su interfaz para realizar las pruebas con la placa de control en un entorno seguro. Esta tesis se centra en mejorar el proceso de verificación de los sistemas de control en aplicaciones de electrónica potencia. La contribución general es proporcionar una alternativa a al uso de los HIL para la verificación del hardware/software de la tarjeta de control. La alternativa se basa en la técnica de Software-in-the-loop (SIL) y trata de superar o abordar las limitaciones encontradas hasta la fecha en el SIL. Para mejorar las cualidades de SIL se ha desarrollado una herramienta software denominada COSIL que permite co-simular la implementación e integración final del sistema de control, sea software (CPU), hardware (FPGA) o una mezcla de software y hardware, al mismo tiempo que su interacción con la planta de potencia. Dicha plataforma puede trabajar en múltiples niveles de abstracción e incluye soporte para realizar co-simulación mixtas en distintos lenguajes como C o VHDL. A lo largo de la tesis se hace hincapié en mejorar una de las limitaciones de SIL, su baja velocidad de simulación. Se proponen diferentes soluciones como el uso de emuladores software, distintos niveles de abstracción del software y hardware, o relojes locales en los módulos de la FPGA. En especial se aporta un mecanismo de sincronizaron externa para el emulador software QEMU habilitando su emulación multi-core. Esta aportación habilita el uso de QEMU en plataformas virtuales de co-simulacion como COSIL. Toda la plataforma COSIL, incluido el uso de QEMU, se ha analizado bajo diferentes tipos de aplicaciones y bajo un proyecto industrial real. Su uso ha sido crítico para desarrollar y verificar el software y hardware del sistema de control de un convertidor de 400 kVA

A time-predictable many-core processor design for critical real-time embedded systems

Critical Real-Time Embedded Systems (CRTES) are in charge of controlling fundamental parts of embedded system, e.g. energy harvesting solar panels in satellites, steering and breaking in cars, or flight management systems in airplanes. To do so, CRTES require strong evidence of correct functional and timing behavior. The former guarantees that the system operates correctly in response of its inputs; the latter ensures that its operations are performed within a predefined time budget. CRTES aim at increasing the number and complexity of functions. Examples include the incorporation of \smarter" Advanced Driver Assistance System (ADAS) functionality in modern cars or advanced collision avoidance systems in Unmanned Aerial Vehicles (UAVs). All these new features, implemented in software, lead to an exponential growth in both performance requirements and software development complexity. Furthermore, there is a strong need to integrate multiple functions into the same computing platform to reduce the number of processing units, mass and space requirements, etc. Overall, there is a clear need to increase the computing power of current CRTES in order to support new sophisticated and complex functionality, and integrate multiple systems into a single platform. The use of multi- and many-core processor architectures is increasingly seen in the CRTES industry as the solution to cope with the performance demand and cost constraints of future CRTES. Many-cores supply higher performance by exploiting the parallelism of applications while providing a better performance per watt as cores are maintained simpler with respect to complex single-core processors. Moreover, the parallelization capabilities allow scheduling multiple functions into the same processor, maximizing the hardware utilization. However, the use of multi- and many-cores in CRTES also brings a number of challenges related to provide evidence about the correct operation of the system, especially in the timing domain. Hence, despite the advantages of many-cores and the fact that they are nowadays a reality in the embedded domain (e.g. Kalray MPPA, Freescale NXP P4080, TI Keystone II), their use in CRTES still requires finding efficient ways of providing reliable evidence about the correct operation of the system. This thesis investigates the use of many-core processors in CRTES as a means to satisfy performance demands of future complex applications while providing the necessary timing guarantees. To do so, this thesis contributes to advance the state-of-the-art towards the exploitation of parallel capabilities of many-cores in CRTES contributing in two different computing domains. From the hardware domain, this thesis proposes new many-core designs that enable deriving reliable and tight timing guarantees. From the software domain, we present efficient scheduling and timing analysis techniques to exploit the parallelization capabilities of many-core architectures and to derive tight and trustworthy Worst-Case Execution Time (WCET) estimates of CRTES.Los sistemas críticos empotrados de tiempo real (en ingles Critical Real-Time Embedded Systems, CRTES) se encargan de controlar partes fundamentales de los sistemas integrados, e.g. obtención de la energía de los paneles solares en satélites, la dirección y frenado en automóviles, o el control de vuelo en aviones. Para hacerlo, CRTES requieren fuerte evidencias del correcto comportamiento funcional y temporal. El primero garantiza que el sistema funciona correctamente en respuesta de sus entradas; el último asegura que sus operaciones se realizan dentro de unos limites temporales establecidos previamente. El objetivo de los CRTES es aumentar el número y la complejidad de las funciones. Algunos ejemplos incluyen los sistemas inteligentes de asistencia a la conducción en automóviles modernos o los sistemas avanzados de prevención de colisiones en vehiculos aereos no tripulados. Todas estas nuevas características, implementadas en software,conducen a un crecimiento exponencial tanto en los requerimientos de rendimiento como en la complejidad de desarrollo de software. Además, existe una gran necesidad de integrar múltiples funciones en una sóla plataforma para así reducir el número de unidades de procesamiento, cumplir con requisitos de peso y espacio, etc. En general, hay una clara necesidad de aumentar la potencia de cómputo de los actuales CRTES para soportar nueva funcionalidades sofisticadas y complejas e integrar múltiples sistemas en una sola plataforma. El uso de arquitecturas multi- y many-core se ve cada vez más en la industria CRTES como la solución para hacer frente a la demanda de mayor rendimiento y las limitaciones de costes de los futuros CRTES. Las arquitecturas many-core proporcionan un mayor rendimiento explotando el paralelismo de aplicaciones al tiempo que proporciona un mejor rendimiento por vatio ya que los cores se mantienen más simples con respecto a complejos procesadores de un solo core. Además, las capacidades de paralelización permiten programar múltiples funciones en el mismo procesador, maximizando la utilización del hardware. Sin embargo, el uso de multi- y many-core en CRTES también acarrea ciertos desafíos relacionados con la aportación de evidencias sobre el correcto funcionamiento del sistema, especialmente en el ámbito temporal. Por eso, a pesar de las ventajas de los procesadores many-core y del hecho de que éstos son una realidad en los sitemas integrados (por ejemplo Kalray MPPA, Freescale NXP P4080, TI Keystone II), su uso en CRTES aún precisa de la búsqueda de métodos eficientes para proveer evidencias fiables sobre el correcto funcionamiento del sistema. Esta tesis ahonda en el uso de procesadores many-core en CRTES como un medio para satisfacer los requisitos de rendimiento de aplicaciones complejas mientras proveen las garantías de tiempo necesarias. Para ello, esta tesis contribuye en el avance del estado del arte hacia la explotación de many-cores en CRTES en dos ámbitos de la computación. En el ámbito del hardware, esta tesis propone nuevos diseños many-core que posibilitan garantías de tiempo fiables y precisas. En el ámbito del software, la tesis presenta técnicas eficientes para la planificación de tareas y el análisis de tiempo para aprovechar las capacidades de paralelización en arquitecturas many-core, y también para derivar estimaciones de peor tiempo de ejecución (Worst-Case Execution Time, WCET) fiables y precisas