674 research outputs found
A novel actuator-internal micro/nano positioning stage with an arch-shape bridge type amplifier
This paper presents a novel actuator-internal two degree-of-freedom (2-DOF) micro/nano positioning stage actuated by piezoelectric (PZT) actuators, which can be used as a fine actuation part in dual-stage system. To compensate the positioning error of coarse stage and achieve a large motion stroke, a symmetrical structure with an arch-shape bridge type amplifier based on single notch circular flexure hinges is proposed and utilized in the positioning stage. Due to the compound bridge arm configuration and compact flexure hinge structure, the amplification mechanism can realize high lateral stiffness and compact structure simultaneously, which is of great importance to protect PZT actuators. The amplification mechanism is integrated into the decoupling mechanism to improve compactness, and to produce decoupled motion in X- and Y- axes. An analytical model is established to explore the static and dynamic characteristics, and the geometric parameters are optimized. The performance of the positioning stage is evaluated through finite element analysis (FEA) and experimental test. The results indicate that the stage can implement 2-DOF decoupled motion with a travel range of 55.4×53.2 μm2, and the motion resolution is 8 nm. The stage can be used in probe tip-based micro/nano scratching
Recommended from our members
Design and computational optimization of a flexure-based XY nano-positioning stage
This thesis presents the design and computational optimization of a two-axis nano-positioning stage. The devised stage relies on double parallelogram flexure bearings with under-constraint eliminating linkages to enable motion in the primary degrees-of-freedom. The structural parameters of the underlying flexures were optimized to provide a large-range and high bandwidth with sub-micron resolution while maintaining a compact size. A finite element model was created to establish a functional relationship between the geometry of the flexure elements and the stiffness behavior. Then, a neural network was trained from the simulation results to explore the design space with a low computational expense. The neural net was integrated with a genetic algorithm to optimize the design of the flexures for compactness and dynamic performance. The optimal solutions resulted in a reduction of stage footprint by 14% and an increase in the first natural frequency by 75% relative to a baseline design, all while preserving the same 50mm range in each axis with a factor of safety of 2. This confirms the efficacy of the proposed approach in improving stage performance through an optimization of its constituent flexures.Mechanical Engineerin
Design and control methodology of a 3-DOF flexure-based mechanism for micro/nano-positioning
A 3-DOF (X–Y–θZ) planar flexure-based mechanism is designed and monolithically manufactured using Wire Electro-Discharge Machining (WEDM) technology. The compact flexure-based mechanism is directly driven by three piezoelectric actuators (PZTs) through decoupling mechanisms. The orthogonal configuration in the x and y directions can guarantee the decoupling translational motion in these axes. The rotational motion and translational displacement in the x direction can be decoupled by controlling the piezoelectric actuators in the x axis with the same displacement values in same and opposite motion directions, respectively. The static and dynamic models of the developed flexure-based mechanism have been developed based on the pseudo-rigid-body model methodology. The mechanical design optimization is conducted to improve the static and dynamic characteristics of the flexure-based mechanism. Finite Element Analyses (FEA) are also carried out to verify the established models and optimization results. A novel hybrid feedforward/feedback controller has been provided to eliminate/reduce the nonlinear hysteresis and external disturbance of the flexure-based mechanism. Experimental testing has been performed to examine the dynamic performance of the developed flexure-based mechanism
Design, Development and Implementation of the Position Estimator Algorithm for Harmonic Motion on the XY Flexural Mechanism for High Precision Positioning
This article presents a novel concept of the position estimator algorithm for voice coil actuators used in precision scanning applications. Here, a voice coil motor was used as an actuator and a sensor using the position estimator algorithm, which was derived from an electro-mechanical model of a voice coil motor. According to the proposed algorithm, the position of coil relative to the fixed magnet position depends on the current drawn, voltage across coil and motor constant of the voice coil motor. This eliminates the use of a sensor that is an integral part of all feedback control systems. Proposed position estimator was experimentally validated for the voice coil actuator in integration with electro-mechanical modeling of the flexural mechanism. The experimental setup consisted of the flexural mechanism, voice coil actuator, current and voltage monitoring circuitry and its interfacing with PC via a dSPACE DS1104 R&D microcontroller board. Theoretical and experimental results revealed successful implementation of the proposed novel algorithm in the feedback control system with positioning resolution of less than ±5 microns at the scanning speed of more than 5 mm/s. Further, proportional-integral-derivative (PID) control strategy was implemented along with developed algorithm to minimize the error. The position determined by the position estimator algorithm has an accuracy of 99.4% for single direction motion with the experimentally observed position at those instantaneous states
Design and control of a 6-degree-of-freedom precision positioning system
This paper presents the design and test of a6-degree-of-freedom (DOF) precision positioning system, which is assembledby two different 3-DOF precision positioning stages each driven by three piezoelectric actuators (PEAs). Based on the precision PEAs and flexure hinge mechanisms, high precision motion is obtained.The design methodology and kinematic characteristics of the6-DOF positioning system areinvestigated. According to an effective kinematic model, the transformation matrices are obtained, which is used to predict the relationship between the output displacement from the system arrangement and the amountof PEAsexpansion. In addition, the static and dynamic characteristics of the 6-DOF system have been evaluated by finite element method (FEM) simulation andexperiments. The design structure provides a high dynamic bandwidth withthe first naturalfrequency of 586.3 Hz.Decoupling control is proposed to solve the existing coupling motion of the 6-DOF system. Meanwhile, in order to compensate for the hysteresis of PEAs, the inverse Bouc-Wen model was applied as a feedforward hysteresis compensator in the feedforward/feedback hybrid control method. Finally, extensive experiments were performed to verify the tracking performance of the developed mechanism
Design and optimization of full decoupled micro/nano-positioning stage based on mathematical calculation
Nano-positioning is widely used in Micro-electromechanical Systems (MEMS),
micromanipulator and biomedicine, coupling errors and tiny output
displacements are the main disadvantages of the one. A totally uncoupled
micro/nano-positioning stage with lever amplifiers is designed and tested in
this paper. It is fully symmetrical along with the x- and
y-directions.
For obtaining large output displacements, two fully symmetric two-stage lever
displacement amplifiers are utilized to amplify output displacements of
piezoelectric actuators (PZTs). The established models for performances
evaluation of the stage, in terms of kinetostatics, amplification ratio,
reachable workspace, the input and output stiffness, are verified by finite
element analysis (FEA). After that, the dimensional optimization is also
carried out through the genetic optimization algorithm.The prototype of the
mechanism is fabricated by using Wire-Electrical-Discharge-Machining (WEDM)
process. Testing results indicate that the proposed micromanipulator
demonstrates good performance.</p
An inverse Prandtl–Ishlinskii model based decoupling control methodology for a 3-DOF flexure-based mechanism
A modified Prandtl–Ishlinskii (P–I) hysteresis model is developed to form the feedforward controller for a 3-DOF flexure-based mechanism. To improve the control accuracy of the P–I hysteresis model, a hybrid structure that includes backlash operators, dead-zone operators and a cubic polynomial function is proposed. Both the rate-dependent hysteresis modeling and adaptive dead-zone thresholds selection method are investigated. System identification was used to obtain the parameters of the newly-developed hysteresis model. Closed-loop control was added to reduce the influence from external disturbances such as vibration and noise, leading to a combined feedforward/feedback control strategy. The cross-axis coupling motion of the 3-DOF flexure-based mechanism has been explored using the established controller. Accordingly, a decoupling feedforward/feedback controller is proposed and implemented to compensate the coupled motion of the moving platform. Experimental tests are reported to examine the tracking capability of the whole system and features of the controller. It is demonstrated that the proposed decoupling control methodology can distinctly reduce the coupling motion of the moving platform and thus improve the positioning accuracy and trajectory tracking capability
FlexDelta: A flexure-based fully decoupled parallel positioning stage with long stroke
Decoupled parallel positioning stages with large stroke have been
desired in high-speed and precise positioning fields. However, currently such
stages are either short in stroke or unqualified in parasitic motion and
coupling rate. This paper proposes a novel flexure-based decoupled parallel
positioning stage (FlexDelta) and conducts its conceptual design,
modeling, and experimental study. Firstly, the working principle of FlexDelta
is introduced, followed by its mechanism design with flexure. Secondly, the
stiffness model of flexure is established via matrix-based Castigliano's second
theorem, and the influence of its lateral stiffness on the stiffness model of
FlexDelta is comprehensively investigated and then optimally designed. Finally,
experimental study was carried out based on the prototype fabricated. The
results reveal that the positioning stage features centimeter-stroke in three
axes, with coupling rate less than 0.53%, parasitic motion less than 1.72 mrad
over full range. And its natural frequencies are 20.8 Hz, 20.8 Hz, and 22.4 Hz
for , , and axis respectively. Multi-axis path tracking tests were
also carried out, which validates its dynamic performance with micrometer
error
- …