30,801 research outputs found
New intelligent network approach for monitoring physiological parameters : the case of Benin
Benin health system is facing many challenges as: (i) affordable high-quality health care to a growing population providing need, (ii) patients’ hospitalization time reduction, (iii) and presence time of the nursing staff optimization. Such challenges can be solved by remote monitoring of patients. To achieve this, five steps were followed. 1) Identification of the Wireless Body Area Network (WBAN) systems’ characteristics and the patient physiological parameters’ monitoring. 2) The national Integrated Patient Monitoring Network (RIMP) architecture modeling in a cloud of Technocenters. 3) Cross-analysis between the characteristics and the functional requirements identified. 4) Each Technocenter’s functionality simulation through: a) the design approach choice inspired by the life cycle of V systems; b) functional modeling through SysML Language; c) the communication technology and different architectures of sensor networks choice studying. 5) An estimate of the material resources of the national RIMP according to physiological parameters. A National Integrated Network for Patient Monitoring (RNIMP) remotely, ambulatory or not, was designed for Beninese health system. The implementation of the RNIMP will contribute to improve patients’ care in Benin. The proposed network is supported by a repository that can be used for its implementation, monitoring and evaluation. It is a table of 36 characteristic elements each of which must satisfy 5 requirements relating to: medical application, design factors, safety, performance indicators and materiovigilance
Will SDN be part of 5G?
For many, this is no longer a valid question and the case is considered
settled with SDN/NFV (Software Defined Networking/Network Function
Virtualization) providing the inevitable innovation enablers solving many
outstanding management issues regarding 5G. However, given the monumental task
of softwarization of radio access network (RAN) while 5G is just around the
corner and some companies have started unveiling their 5G equipment already,
the concern is very realistic that we may only see some point solutions
involving SDN technology instead of a fully SDN-enabled RAN. This survey paper
identifies all important obstacles in the way and looks at the state of the art
of the relevant solutions. This survey is different from the previous surveys
on SDN-based RAN as it focuses on the salient problems and discusses solutions
proposed within and outside SDN literature. Our main focus is on fronthaul,
backward compatibility, supposedly disruptive nature of SDN deployment,
business cases and monetization of SDN related upgrades, latency of general
purpose processors (GPP), and additional security vulnerabilities,
softwarization brings along to the RAN. We have also provided a summary of the
architectural developments in SDN-based RAN landscape as not all work can be
covered under the focused issues. This paper provides a comprehensive survey on
the state of the art of SDN-based RAN and clearly points out the gaps in the
technology.Comment: 33 pages, 10 figure
Wearable Communications in 5G: Challenges and Enabling Technologies
As wearable devices become more ingrained in our daily lives, traditional
communication networks primarily designed for human being-oriented applications
are facing tremendous challenges. The upcoming 5G wireless system aims to
support unprecedented high capacity, low latency, and massive connectivity. In
this article, we evaluate key challenges in wearable communications. A
cloud/edge communication architecture that integrates the cloud radio access
network, software defined network, device to device communications, and
cloud/edge technologies is presented. Computation offloading enabled by this
multi-layer communications architecture can offload computation-excessive and
latency-stringent applications to nearby devices through device to device
communications or to nearby edge nodes through cellular or other wireless
technologies. Critical issues faced by wearable communications such as short
battery life, limited computing capability, and stringent latency can be
greatly alleviated by this cloud/edge architecture. Together with the presented
architecture, current transmission and networking technologies, including
non-orthogonal multiple access, mobile edge computing, and energy harvesting,
can greatly enhance the performance of wearable communication in terms of
spectral efficiency, energy efficiency, latency, and connectivity.Comment: This work has been accepted by IEEE Vehicular Technology Magazin
Software Defined Networks based Smart Grid Communication: A Comprehensive Survey
The current power grid is no longer a feasible solution due to
ever-increasing user demand of electricity, old infrastructure, and reliability
issues and thus require transformation to a better grid a.k.a., smart grid
(SG). The key features that distinguish SG from the conventional electrical
power grid are its capability to perform two-way communication, demand side
management, and real time pricing. Despite all these advantages that SG will
bring, there are certain issues which are specific to SG communication system.
For instance, network management of current SG systems is complex, time
consuming, and done manually. Moreover, SG communication (SGC) system is built
on different vendor specific devices and protocols. Therefore, the current SG
systems are not protocol independent, thus leading to interoperability issue.
Software defined network (SDN) has been proposed to monitor and manage the
communication networks globally. This article serves as a comprehensive survey
on SDN-based SGC. In this article, we first discuss taxonomy of advantages of
SDNbased SGC.We then discuss SDN-based SGC architectures, along with case
studies. Our article provides an in-depth discussion on routing schemes for
SDN-based SGC. We also provide detailed survey of security and privacy schemes
applied to SDN-based SGC. We furthermore present challenges, open issues, and
future research directions related to SDN-based SGC.Comment: Accepte
A Survey of Green Networking Research
Reduction of unnecessary energy consumption is becoming a major concern in
wired networking, because of the potential economical benefits and of its
expected environmental impact. These issues, usually referred to as "green
networking", relate to embedding energy-awareness in the design, in the devices
and in the protocols of networks. In this work, we first formulate a more
precise definition of the "green" attribute. We furthermore identify a few
paradigms that are the key enablers of energy-aware networking research. We
then overview the current state of the art and provide a taxonomy of the
relevant work, with a special focus on wired networking. At a high level, we
identify four branches of green networking research that stem from different
observations on the root causes of energy waste, namely (i) Adaptive Link Rate,
(ii) Interface proxying, (iii) Energy-aware infrastructures and (iv)
Energy-aware applications. In this work, we do not only explore specific
proposals pertaining to each of the above branches, but also offer a
perspective for research.Comment: Index Terms: Green Networking; Wired Networks; Adaptive Link Rate;
Interface Proxying; Energy-aware Infrastructures; Energy-aware Applications.
18 pages, 6 figures, 2 table
An Energy Driven Architecture for Wireless Sensor Networks
Most wireless sensor networks operate with very limited energy sources-their
batteries, and hence their usefulness in real life applications is severely
constrained. The challenging issues are how to optimize the use of their energy
or to harvest their own energy in order to lengthen their lives for wider
classes of application. Tackling these important issues requires a robust
architecture that takes into account the energy consumption level of functional
constituents and their interdependency. Without such architecture, it would be
difficult to formulate and optimize the overall energy consumption of a
wireless sensor network. Unlike most current researches that focus on a single
energy constituent of WSNs independent from and regardless of other
constituents, this paper presents an Energy Driven Architecture (EDA) as a new
architecture and indicates a novel approach for minimising the total energy
consumption of a WS
- …