A 2x2 bit multiplier using hybrid 13t full adder with vedic mathematics method

Various arithmetic circuits such as multipliers require full adder (FA) as the main block for the circuit to operate. Speed and energy consumption become very vital in design consideration for a low power adder. In this paper, a 2x2 bit Vedic multiplier using hybrid full adder (HFA) with 13 transistors (13T) had been designed successfully. The design was simulated using Synopsys Custom Tools in General Purpose Design Kit (GPDK) 90 nm CMOS technology process. In this design, four AND gates and two hybrid FA (HFAs) are cascaded together and each HFA is constructed from three modules. The cascaded module is arranged in the Vedic mathematics algorithm. This algorithm satisfied the requirement of a fast multiplication operation because of the vertical and crosswise architecture from the Urdhva Triyakbyam Sutra which reduced the number of partial products compared to the conventional multiplication algorithm. With the combination of hybrid full adder and Vedic mathematics, a new combination of multiplier method with low power and low delay is produced. Performance parameters such as power consumption and delay were compared to some of the existing designs. With a 1V voltage supply, the average power consumption of the proposed multiplier was found to be 22.96 µW and a delay of 161 ps

Neuro-memristive Circuits for Edge Computing: A review

The volume, veracity, variability, and velocity of data produced from the ever-increasing network of sensors connected to Internet pose challenges for power management, scalability, and sustainability of cloud computing infrastructure. Increasing the data processing capability of edge computing devices at lower power requirements can reduce several overheads for cloud computing solutions. This paper provides the review of neuromorphic CMOS-memristive architectures that can be integrated into edge computing devices. We discuss why the neuromorphic architectures are useful for edge devices and show the advantages, drawbacks and open problems in the field of neuro-memristive circuits for edge computing

DPA on quasi delay insensitive asynchronous circuits: formalization and improvement

The purpose of this paper is to formally specify a flow devoted to the design of Differential Power Analysis (DPA) resistant QDI asynchronous circuits. The paper first proposes a formal modeling of the electrical signature of QDI asynchronous circuits. The DPA is then applied to the formal model in order to identify the source of leakage of this type of circuits. Finally, a complete design flow is specified to minimize the information leakage. The relevancy and efficiency of the approach is demonstrated using the design of an AES crypto-processor.Comment: Submitted on behalf of EDAA (http://www.edaa.com/

Gate-level timing analysis and waveform evaluation

Static timing analysis (STA) is an integral part of modern VLSI chip design. Table lookup based methods are widely used in current industry due to its fast runtime and mature algorithms. Conventional STA algorithms based on table-lookup methods are developed under many assumptions in timing analysis; however, most of those assumptions, such as that input signals and output signals can be accurately modeled as ramp waveforms, are no longer satisfactory to meet the increasing demand of accuracy for new technologies. In this dissertation, we discuss several crucial issues that conventional STA has not taken into consideration, and propose new methods to handle these issues and show that new methods produce accurate results. In logic circuits, gates may have multiple inputs and signals can arrive at these inputs at different times and with different waveforms. Different arrival times and waveforms of signals can cause very different responses. However, multiple-input transition effects are totally overlooked by current STA tools. Using a conventional single-input transition model when multiple-input transition happens can cause significant estimation errors in timing analysis. Previous works on this issue focus on developing a complicated gate model to simulate the behavior of logic gates. These methods have high computational cost and have to make significant changes to the prevailing STA tools, and are thus not feasible in practice. This dissertation proposes a simplified gate model, uses transistor connection structures to capture the behavior of multiple-input transitions and requires no change to the current STA tools. Another issue with table lookup based methods is that the load of each gate in technology libraries is modeled as a single lumped capacitor. But in the real circuit, the Abstract 2 gate connects to its subsequent gates via metal wires. As the feature size of integrated circuit scales down, the interconnection cannot be seen as a simple capacitor since the resistive shielding effect will largely affect the equivalent capacitance seen from the gate. As the interconnection has numerous structures, tabulating the timing data for various interconnection structures is not feasible. In this dissertation, by using the concept of equivalent admittance, we reduce an arbitrary interconnection structure into an equivalent π-model RC circuit. Many previous works have mapped the π-model to an effective capacitor, which makes the table lookup based methods useful again. However, a capacitor cannot be equivalent to a π-model circuit, and will thus result in significant inaccuracy in waveform evaluation. In order to obtain an accurate waveform at gate output, a piecewise waveform evaluation method is proposed in this dissertation. Each part of the piecewise waveform is evaluated according to the gate characteristic and load structures. Another contribution of this dissertation research is a proposed equivalent waveform search method. The signal waveforms can be very complicated in the real circuits because of noises, race hazards, etc. The conventional STA only uses one attribute (i.e., transition time) to describe the waveform shape which can cause significant estimation errors. Our approach is to develop heuristic search functions to find equivalent ramps to approximate input waveforms. Here the transition time of a final ramp can be completely different from that of the original waveform, but we can get higher accuracy on output arrival time and transition time. All of the methods mentioned in this dissertation require no changes to the prevailing STA tools, and have been verified across different process technologies