7,913 research outputs found

    UMSL Bulletin 2023-2024

    Get PDF
    The 2023-2024 Bulletin and Course Catalog for the University of Missouri St. Louis.https://irl.umsl.edu/bulletin/1088/thumbnail.jp

    Graduate Catalog of Studies, 2023-2024

    Get PDF

    Beam scanning by liquid-crystal biasing in a modified SIW structure

    Get PDF
    A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

    Southern Adventist University Undergraduate Catalog 2022-2023

    Get PDF
    Southern Adventist University\u27s undergraduate catalog for the academic year 2022-2023.https://knowledge.e.southern.edu/undergrad_catalog/1121/thumbnail.jp

    Digital twins in the construction industry: a comprehensive review of current implementations, enabling technologies, and future directions

    Get PDF
    This paper presents a comprehensive understanding of current digital twin (DT) implementations in the construction industry, along with providing an overview of technologies enabling the operation of DTs in the industry. To this end, 145 publications were identified using a systematic literature review. The results revealed eight key areas of DT implementation including (i) virtual design, (ii) project planning and management, (iii) asset management and maintenance, (iv) safety management, (v) energy efficiency and sustainability, (vi) quality control and management, (vii) supply chain management and logistics, and (viii) structural health monitoring. The findings demonstrate that DT technology has the capacity to revolutionise the construction industry across these areas, enabling optimised designs, improved collaboration, real-time monitoring, predictive maintenance, enhanced safety practices, energy performance optimisation, quality inspections, efficient supply chain management, and proactive maintenance. This study also identified several challenges that hinder the widespread implementation of DT in construction, including (i) data integration and interoperability, (ii) data accuracy and completeness, (iii) scalability and complexity, (iv) privacy and security, and (v) standards and governance. To address these challenges, this paper recommends prioritising standardised data formats, protocols, and APIs for seamless collaboration, exploring semantic data modelling and ontologies for data integration, implementing validation processes and robust data governance for accuracy and completeness, harnessing high-performance computing and advanced modelling techniques for scalability and complexity, establishing comprehensive data protection and access controls for privacy and security, and developing widely accepted standards and governance frameworks with industry-wide collaboration. By addressing these challenges, the construction industry can unlock the full potential of DT technology, thus enhancing safety, reliability, and efficiency in construction projects

    Meso-scale FDM material layout design strategies under manufacturability constraints and fracture conditions

    Get PDF
    In the manufacturability-driven design (MDD) perspective, manufacturability of the product or system is the most important of the design requirements. In addition to being able to ensure that complex designs (e.g., topology optimization) are manufacturable with a given process or process family, MDD also helps mechanical designers to take advantage of unique process-material effects generated during manufacturing. One of the most recognizable examples of this comes from the scanning-type family of additive manufacturing (AM) processes; the most notable and familiar member of this family is the fused deposition modeling (FDM) or fused filament fabrication (FFF) process. This process works by selectively depositing uniform, approximately isotropic beads or elements of molten thermoplastic material (typically structural engineering plastics) in a series of pre-specified traces to build each layer of the part. There are many interesting 2-D and 3-D mechanical design problems that can be explored by designing the layout of these elements. The resulting structured, hierarchical material (which is both manufacturable and customized layer-by-layer within the limits of the process and material) can be defined as a manufacturing process-driven structured material (MPDSM). This dissertation explores several practical methods for designing these element layouts for 2-D and 3-D meso-scale mechanical problems, focusing ultimately on design-for-fracture. Three different fracture conditions are explored: (1) cases where a crack must be prevented or stopped, (2) cases where the crack must be encouraged or accelerated, and (3) cases where cracks must grow in a simple pre-determined pattern. Several new design tools, including a mapping method for the FDM manufacturability constraints, three major literature reviews, the collection, organization, and analysis of several large (qualitative and quantitative) multi-scale datasets on the fracture behavior of FDM-processed materials, some new experimental equipment, and the refinement of a fast and simple g-code generator based on commercially-available software, were developed and refined to support the design of MPDSMs under fracture conditions. The refined design method and rules were experimentally validated using a series of case studies (involving both design and physical testing of the designs) at the end of the dissertation. Finally, a simple design guide for practicing engineers who are not experts in advanced solid mechanics nor process-tailored materials was developed from the results of this project.U of I OnlyAuthor's request

    Making friends with failure in STS

    Get PDF

    1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

    Get PDF
    A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

    Dynamics of Pakistan’s Ballistic Missile Acquisition

    Get PDF
    Arms dynamic studies are concerned with explaining the causes and consequences of state’s decision to acquire arms. Such studies are dominated by two opposing models. First, the action-reaction model, which posits a state’s decision to acquire arms as a rational response to external threats and consequently it enables them to deter belligerent adversaries. Second, the domestic structure model, which holds that arms acquisitions are an outcome of domestic interests and consequently create instability and strain political relations. Traditionally the two models have competed for exclusivity in explaining armament phenomena. However, more recent studies argue that they are, in fact, not mutually exclusive but complementary to each other. The basic underlying assumption of these studies is, while external security threats may provide a rationale for a state to acquire arms the scale and manner by which the state arms itself will be determined by domestic forces. The basic generalisations for the two models have been extracted from the armament dynamics of the Cold War superpowers or the major arms producing states from the Western Hemisphere or Global North. In the case of less industrialised weapons producer like Pakistan the literature takes a narrow approach, identifying its behaviour as congruent with action- reaction model and downplaying the importance of domestic-structure model. This thesis argues that not only the action-reaction process in the case of Pakistan’s ballistic missile competition vis-à-vis that of India is less understood but domestic factors have also played a crucial role in the ballistic missile acquisition. In accordance with this argument this thesis hopes to conduct a twofold analysis into the external and internal dynamics of Pakistan’s ballistic missile acquisition. The research postulates that while external threats have provided rationale for Pakistan’s ballistic missile programme, domestic factors have intervened to influence certain missile developments in the programme
    • …
    corecore