Sensorless torque/force control

Motion control systems represent a main subsystem for majority of processing systems that can be found in the industrial sector. These systems are concerned with the actuation of all devices in the manufacturing process such as machines, robots, conveyor systems and pick and place mechanisms such that they satisfy certain motion requirements, e.g., the pre specified reference trajectories are followed along with delivering the proper force or torque to the point of interest at which the process occurs. In general, the aim of force/torque control is to impose the desired force on the environment even if the environment has dynamical motion

On Sensorless Collision Detection and Measurement of External Forces in Presence of Modeling Inaccuracies

The field of human-robot interaction has garnered significant interest in the last decade. Every form of human-robot coexistence must guarantee the safety of the user. Safety in human-robot interaction is being vigorously studied, in areas such as collision avoidance, soft actuators, light-weight robots, computer vision techniques, soft tissue modeling, collision detection, etc. Despite the safety provisions, unwanted collisions can occur in case of system faults. In such cases, before post-collision strategies are triggered, it is imperative to effectively detect the collisions. Implementation of tactile sensors, vision systems, sonar and Lidar sensors, etc., allows for detection of collisions. However, due to the cost of such methods, more practical approaches are being investigated. A general goal remains to develop methods for fast detection of external contacts using minimal sensory information. Availability of position data and command torques in manipulators permits development of observer-based techniques to measure external forces/torques. The presence of disturbances and inaccuracies in the model of the robot presents challenges in the efficacy of observers in the context of collision detection. The purpose of this thesis is to develop methods that reduce the effects of modeling inaccuracies in external force/torque estimation and increase the efficacy of collision detection. It is comprised of the following four parts: 1. The KUKA Light-Weight Robot IV+ is commonly employed for research purposes. The regressor matrix, minimal inertial parameters and the friction model of this robot are identified and presented in detail. To develop the model, relative weight analysis is employed for identification. 2. Modeling inaccuracies and robot state approximation errors are considered simultaneously to develop model-based time-varying thresholds for collision detection. A metric is formulated to compare trajectories realizing the same task in terms of their collision detection and external force/torque estimation capabilities. A method for determining optimal trajectories with regards to accurate external force/torque estimation is also developed. 3. The effects of velocity on external force/torque estimation errors are studied with and without the use of joint force/torque sensors. Velocity-based thresholds are developed and implemented to improve collision detection. The results are compared with the collision detection module integrated in the KUKA Light-Weight Robot IV+. 4. An alternative joint-by-joint heuristic method is proposed to identify the effects of modeling inaccuracies on external force/torque estimation. Time-varying collision detection thresholds associated with the heuristic method are developed and compared with constant thresholds. In this work, the KUKA Light-Weight Robot IV+ is used for obtaining the experimental results. This robot is controlled via the Fast Research Interface and Visual C++ 2008. The experimental results confirm the efficacy of the proposed methodologies

Mechatronics of systems with undetermined configurations

This work is submitted for the award of a PhD by published works. It deals with some of the efforts of the author over the last ten years in the field of Mechatronics. Mechatronics is a new area invented by the Japanese in the late 1970's, it consists of a synthesis of computers and electronics to improve mechanical systems. To control any mechanical event three fundamental features must be brought together: the sensors used to observe the process, the control software, including the control algorithm used and thirdly the actuator that provides the stimulus to achieve the end result. Simulation, which plays such an important part in the Mechatronics process, is used in both in continuous and discrete forms. The author has spent some considerable time developing skills in all these areas. The author was certainly the first at Middlesex to appreciate the new developments in Mechatronics and their significance for manufacturing. The author was one of the first mechanical engineers to recognise the significance of the new transputer chip. This was applied to the LQG optimal control of a cinefilm copying process. A 300% improvement in operating speed was achieved, together with tension control. To make more efficient use of robots they have to be made both faster and cheaper. The author found extremely low natural frequencies of vibration, ranging from 3 to 25 Hz. This limits the speed of response of existing robots. The vibration data was some of the earliest available in this field, certainly in the UK. Several schemes have been devised to control the flexible robot and maintain the required precision. Actuator technology is one area where mechatronic systems have been the subject of intense development. At Middlesex we have improved on the Aexator pneumatic muscle actuator, enabling it to be used with a precision of about 2 mm. New control challenges have been undertaken now in the field of machine tool chatter and the prevention of slip. A variety of novel and traditional control algorithms have been investigated in order to find out the best approach to solve this problem