From Packet to Power Switching: Digital Direct Load Scheduling

At present, the power grid has tight control over its dispatchable generation capacity but a very coarse control on the demand. Energy consumers are shielded from making price-aware decisions, which degrades the efficiency of the market. This state of affairs tends to favor fossil fuel generation over renewable sources. Because of the technological difficulties of storing electric energy, the quest for mechanisms that would make the demand for electricity controllable on a day-to-day basis is gaining prominence. The goal of this paper is to provide one such mechanisms, which we call Digital Direct Load Scheduling (DDLS). DDLS is a direct load control mechanism in which we unbundle individual requests for energy and digitize them so that they can be automatically scheduled in a cellular architecture. Specifically, rather than storing energy or interrupting the job of appliances, we choose to hold requests for energy in queues and optimize the service time of individual appliances belonging to a broad class which we refer to as "deferrable loads". The function of each neighborhood scheduler is to optimize the time at which these appliances start to function. This process is intended to shape the aggregate load profile of the neighborhood so as to optimize an objective function which incorporates the spot price of energy, and also allows distributed energy resources to supply part of the generation dynamically.Comment: Accepted by the IEEE journal of Selected Areas in Communications (JSAC): Smart Grid Communications series, to appea

Market-based Control of Air-Conditioning Loads with Switching Constraints for Providing Ancillary Services

Air-conditioning loads (ACLs) are among the most promising demand side resources for their thermal storage capacity and fast response potential. This paper adopts the principle of market-based control (MBC) for the ACLs to participate in the ancillary services. The MBC method is suitable for the control of distributed ACLs because it can satisfy diversified requirements, reduce the communication bandwidth and protect users' privacy. The modified bidding and clearing strategies proposed in this paper makes it possible to adjust the switching frequency and strictly satisfy the lockout time constraint for mechanical wear reduction and device protection, without increasing the communication traffic and computational cost of the control center. The performance of the ACL cluster in two typical ancillary services is studied to demonstrate the effect of the proposed method. The case studies also investigate how the control parameters affect the response performance, comfort level and switching frequency.Comment: 5 pages, conferenc

Wind Farms and Flexible Loads Contribution in Automatic Generation Control: An Extensive Review and Simulation

With the increasing integration of wind energy sources into conventional power systems, the demand for reserve power has risen due to associated forecasting errors. Consequently, developing innovative operating strategies for automatic generation control (AGC) has become crucial. These strategies ensure a real-time balance between load and generation while minimizing the reliance on operating reserves from conventional power plant units. Wind farms exhibit a strong interest in participating in AGC operations, especially when AGC is organized into different regulation areas encompassing various generation units. Further, the integration of flexible loads, such as electric vehicles and thermostatically controlled loads, is considered indispensable in modern power systems, which can have the capability to offer ancillary services to the grid through the AGC systems. This study initially presents the fundamental concepts of wind power plants and flexible load units, highlighting their significant contribution to load frequency control (LFC) as an important aspect of AGC. Subsequently, a real-time dynamic dispatch strategy for the AGC model is proposed, integrating reserve power from wind farms and flexible load units. For simulations, a future Pakistan power system model is developed using Dig SILENT Power Factory software (2020 SP3), and the obtained results are presented. The results demonstrate that wind farms and flexible loads can effectively contribute to power-balancing operations. However, given its cost-effectiveness, wind power should be operated at maximum capacity and only be utilized when there is a need to reduce power generation. Additionally, integrating reserves from these sources ensures power system security, reduces dependence on conventional sources, and enhances economic efficiency

A two level feedback system design to provide regulation reserve

Demand side management has gained increasing importance as the penetration of renewable energy grows. Based on a Markov jump process modelling of a group of thermostatic loads, this paper proposes a two level feedback system design be- tween the independent system operator (ISO) and the regulation service provider such that two objectives are achieved: (1) the ISO can optimally dispatch regulation signals to multiple providers in real time in order to reduce the requirement for expensive spinning reserves, and (2) each regulation provider can control its thermostatic loads to respond the ISO signal. It is also shown that the amount of regulation service that can be provided is implicitly restricted by a few fundamental parameters of the provider itself, such as the allowable set point choice and its thermal constant. An interesting finding is that the regulation provider’s ability to provide a large amount of long term accumulated regulation and short term signal tracking restrict each other. Simulation results are presented to verify and illustrate the performance of the proposed framework

Demand response from thermostatically controlled loads: modelling, control and system-level value

The research area of this thesis concerns the efficient and secure operation of the future low-carbon power system, where alternative sources of control and flexibility will progressively replace the traditional providers of ancillary services i.e. conventional generators. Various options are engaged in this challenge and suit the innovative concept of Smart Grid. Specifically, this thesis investigates the potential of demand side response support by means of thermostatically controlled loads (TCLs). This thesis aims to quantify the impact that a population of thermostatically controlled loads has on the commitment and dispatch of a future power system characterized by a large penetration of renewable energy sources (e.g. wind) that are variable and intermittent. Thanks to their relative insensitivity to temperature fluctuations, thermostatic loads would be able to provide frequency response services and other forms of system services, such as energy arbitrage and congestion relief. These actions in turn enhance the power system operation and support the strict compliance with system security standards. However, the achievement of this transition requires addressing two challenges. The first deals with the design of accurate device models. Significant differences affect the devices’ design included in the same class, leading to different system-level performances. In addition, the flexibility associated to TCLs would be handled more easily by means of models that describes the TCLs dynamics directly as a cluster rather than considering the appliances individually. Second, it is not straightforward achieving satisfactory controllability of a cluster of TCLs for the considered applications. The complexity lies in the typical operation of these devices that has only two power states (on and off) whereas the desired response is continuous. Moreover the control strategy has always to comply with strict device-level temperature constraints as the provision of ancillary services cannot affect the quality of the service of the primary function of TCLs. This thesis addresses the challenges exhibited. Detailed thermal dynamic models are derived for eight classes of domestic and commercial refrigeration units. In addition, a heterogeneous population of TCLs is modelled as a leaky storage unit; this unit describes the aggregate flexibility of a large population of TCLs as a single storage unit incorporating the devices’ physical thermal models and their operational temperature limits. The control problem is solved by means of an initial hybrid controller for frequency response purposes that is afterwards replaced by an advanced controller for various applications. Provided these two elements, a novel demand side response model is designed considering the simultaneous provision of a number of system services and taking into account the effect of the load energy recovery. The model, included in a stochastic scheduling routine, quantifies the system-level operational cost and wind curtailment savings enabled by the TCLs support.Open Acces