Design study of general aviation collision avoidance system

The selection and design of a time/frequency collision avoidance system for use in general aviation aircraft is discussed. The modifications to airline transport collision avoidance equipment which were made to produce the simpler general aviation system are described. The threat determination capabilities and operating principles of the general aviation system are illustrated

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Architectures and synchronization techniques for distributed satellite systems: a survey

Cohesive Distributed Satellite Systems (CDSSs) is a key enabling technology for the future of remote sensing and communication missions. However, they have to meet strict synchronization requirements before their use is generalized. When clock or local oscillator signals are generated locally at each of the distributed nodes, achieving exact synchronization in absolute phase, frequency, and time is a complex problem. In addition, satellite systems have significant resource constraints, especially for small satellites, which are envisioned to be part of the future CDSSs. Thus, the development of precise, robust, and resource-efficient synchronization techniques is essential for the advancement of future CDSSs. In this context, this survey aims to summarize and categorize the most relevant results on synchronization techniques for Distributed Satellite Systems (DSSs). First, some important architecture and system concepts are defined. Then, the synchronization methods reported in the literature are reviewed and categorized. This article also provides an extensive list of applications and examples of synchronization techniques for DSSs in addition to the most significant advances in other operations closely related to synchronization, such as inter-satellite ranging and relative position. The survey also provides a discussion on emerging data-driven synchronization techniques based on Machine Learning (ML). Finally, a compilation of current research activities and potential research topics is proposed, identifying problems and open challenges that can be useful for researchers in the field.This work was supported by the Luxembourg National Research Fund (FNR), through the CORE Project COHEsive SATellite (COHESAT): Cognitive Cohesive Networks of Distributed Units for Active and Passive Space Applications, under Grant FNR11689919.Award-winningPostprint (published version

Robust cell-free mmWave/sub-THz access using minimal coordination and coarse synchronization

This study investigates simpler alternatives to coherent joint transmission for supporting robust connectivity against signal blockage in mmWave/sub-THz access networks. By taking an information-theoretic viewpoint, we demonstrate analytically that with a careful design, full macrodiversity gains and significant SNR gains can be achieved through canonical receivers and minimal coordination and synchronization requirements at the infrastructure side. Our proposed scheme extends non-coherent joint transmission by employing a special form of diversity to counteract artificially induced deep fades that would otherwise make this technique often compare unfavorably against standard transmitter selection schemes. Additionally, the inclusion of an Alamouti-like space-time coding layer is shown to recover a significant fraction of the optimal performance. Our conclusions are based on an insightful multi-point intermittent block fading channel model that enables rigorous ergodic and outage rate analysis, while also considering timing offsets due to imperfect delay compensation. Although simplified, our approach captures the essential features of modern mmWave/sub-THz communications, thereby providing practical design guidelines for realistic systems

Analysis and Mitigation of Asynchronous Interference in Coordinated Multipoint Systems

Next generation cellular wireless networks need to achieve both high peak and average data rates. Also, they need to improve the fairness by providing more homogenous quality of service distribution over the entire cell area. Base station (BS) cooperation is one of the techniques which is used to achieve these requirements, especially the fairness requirement. It is able not only to mitigate inter-cell interference, but also to exploit this interference and to use it as a useful signal. Although BS cooperation or what is called coordinated multipoint (CoMP) communications proves that it can achieve high gains in theory, there are some challenges that need to be solved in order for it to be widely deployed. One of the major challenges which prevents the CoMP concept from being widely deployed in new cellular systems is timing synchronization. This problem is particularly challenging when OFDM is employed which is the case in the uplink (UL) and downlink (DL) of WiMAX systems and in the DL of LTE systems. The problem is inherited from the limitations caused by integer time offsets in OFDM systems. In order to achieve the gains promised by CoMP systems, the user equipments' (UEs) signals in UL or the BSs signals in DL should be synchronized such that the time difference of arrivals do not exceed the cyclic prefix length of the transmitted signals. In this thesis, we first provide a detailed mathematical analysis of the impact of integer time offsets on the performance of single-input-single-output (SISO) OFDM systems. In particular, closed-form expressions for the different types of interference caused by the integer time offset are derived. Furthermore, we derive exact closed-form expressions for the bit error rate (BER) and the symbol error rate (SER) of BPSK, QPSK and 16-QAM modulation for transmission over both AWGN and Rayleigh fading channels. The effect of the fractional carrier frequency offset (CFO) is taken into consideration in the derivations. For OFDM systems with a large number of subcarriers, an approximate method for evaluating the BER/SER is given. Next, we generalized our expressions to be suitable for the single-input-multiple-output (SIMO) OFDM systems. The derived closed-form expressions for the interference and probability of error enabled us to investigate the timing synchronization problem of UL CoMP systems, where it is not possible for a UE to be synchronized to more than one BS at the same time. This synchronization problem imposes an upper limit on the percentage of cooperation which could occur in an UL CoMP system. By using geometrical and analytical approaches, we define this upper bound. Moreover, an MMSE-based receiver that mitigates the unavoidable asynchronous interference is proposed. Furthermore, a simple joint channel and delay estimation block is incorporated into the receiver to examine its performance with estimation errors. Finally, an iterative procedure is suggested to reduce the complexity of the proposed mitigation method. Numerical results are provided to show the accuracy of the derived expressions and the robustness of the proposed mitigation method