Approximation Algorithm for Unrooted Prize-Collecting Forest with Multiple Components and Its Application on Prize-Collecting Sweep Coverage

In this paper, we introduce a polynomial-time 2-approximation algorithm for the Unrooted Prize-Collecting Forest with $K$ Components (URPCF$_K$) problem. URPCF$_K$ aims to find a forest with exactly $K$ connected components while minimizing both the forest's weight and the penalties incurred by unspanned vertices. Unlike the rooted version RPCF$_K$, where a 2-approximation algorithm exists, solving the unrooted version by guessing roots leads to exponential time complexity for non-constant $K$. To address this challenge, we propose a rootless growing and rootless pruning algorithm. We also apply this algorithm to improve the approximation ratio for the Prize-Collecting Min-Sensor Sweep Cover problem (PCMinSSC) from 8 to 5. Keywords: approximation algorithm, prize-collecting Steiner forest, sweep cover

TCWTP: Time-Constrained Weighted Targets Patrolling Mechanism in Wireless Mobile Sensor Networks

[[abstract]]Target coverage problems have received much attention in recent years. In a large monitoring environment where targets are distributed over an entire monitored region, deploying static sensors leads to high hardware costs because a high number of sensors may be required to achieve network connectivity. This paper considers the target-patrol issue where a set of mobile data mules (DMs) are dispatched to efficiently patrol the given targets under a predefined time constraint. The targets are assigned weights indicating their importance, where more important targets should be visited more frequently by the DMs. Accordingly, this paper proposes a time-constrained weighted targets patrolling (TCWTP) algorithm for locally constructing efficient patrol paths, thereby ensuring globally stable intervals between visits to all target points. A performance analysis revealed that the proposed TCWTP mechanism outperforms existing works in terms of the average interval between visits, quality of monitoring satisfaction ratio, and monitoring fairness ratio.[[notice]]補正完畢[[booktype]]紙

Enabling Cyber Physical Systems with Wireless Sensor Networking Technologies

[[abstract]]Over the last few years, we have witnessed a growing interest in Cyber Physical Systems (CPSs) that rely on a strong synergy between computational and physical components. CPSs are expected to have a tremendous impact on many critical sectors (such as energy, manufacturing, healthcare, transportation, aerospace, etc) of the economy. CPSs have the ability to transform the way human-to-human, human-toobject, and object-to-object interactions take place in the physical and virtual worlds. The increasing pervasiveness of Wireless Sensor Networking (WSN) technologies in many applications make them an important component of emerging CPS designs. We present some of the most important design requirements of CPS architectures. We discuss key sensor network characteristics that can be leveraged in CPS designs. In addition, we also review a few well-known CPS application domains that depend on WSNs in their design architectures and implementations. Finally, we present some of the challenges that still need to be addressed to enable seamless integration of WSN with CPS designs.[[incitationindex]]SCI[[booktype]]紙

QoS BASED ENERGY EFFICIENT ROUTING IN WIRELESS SENSOR NETWORK

A Wireless Sensor Networks (WSN) is composed of a large number of low-powered sensor nodes that are randomly deployed to collect environmental data. In a WSN, because of energy scarceness, energy efficient gathering of sensed information is one of the most critical issues. Thus, most of the WSN routing protocols found in the literature have considered energy awareness as a key design issue. Factors like throughput, latency and delay are not considered as critical issues in these protocols. However, emerging WSN applications that involve multimedia and imagining sensors require end-to-end delay within acceptable limits. Hence, in addition to energy efficiency, the parameters (delay, packet loss ratio, throughput and coverage) have now become issues of primary concern. Such performance metrics are usually referred to as the Quality of Service (QoS) in communication systems. Therefore, to have efficient use of a sensor node’s energy, and the ability to transmit the imaging and multimedia data in a timely manner, requires both a QoS based and energy efficient routing protocol. In this research work, a QoS based energy efficient routing protocol for WSN is proposed. To achieve QoS based energy efficient routing, three protocols are proposed, namely the QoS based Energy Efficient Clustering (QoSEC) for a WSN, the QoS based Energy Efficient Sleep/Wake Scheduling (QoSES) for a WSN, and the QoS based Energy Efficient Mobile Sink (QoSEM) based Routing for a Clustered WSN. Firstly, in the QoSEC, to achieve energy efficiency and to prolong network/coverage lifetime, some nodes with additional energy resources, termed as super-nodes, in addition to normal capability nodes, are deployed. Multi-hierarchy clustering is done by having super-nodes (acting as a local sink) at the top tier, cluster head (normal node) at the middle tier, and cluster member (normal node) at the lowest tier in the hierarchy. Clustering within normal sensor nodes is done by optimizing the network/coverage lifetime through a cluster-head-selection algorithm and a sleep/wake scheduling algorithm. QoSEC resolves the hot spot problem and prolongs network/coverage lifetime. Secondly, the QoSES addressed the delay-minimization problem in sleep/wake scheduling for event-driven sensor networks for delay-sensitive applications. For this purpose, QoSES assigns different sleep/wake intervals (longer wake interval) to potential overloaded nodes, according to their varied traffic load requirement defined a) by node position in the network, b) by node topological importance, and c) by handling burst traffic in the proximity of the event occurrence node. Using these heuristics, QoSES minimizes the congestion at nodes having heavy traffic loads and ultimately reduces end-to-end delay while maximizing the throughput. Lastly, the QoSEM addresses hot spot problem, delay minimization, and QoS assurance. To address hot-spot problem, mobile sink is used, that move in the network to gather data by virtue of which nodes near to the mobile sink changes with each movement, consequently hot spot problem is minimized. To achieve delay minimization, static sink is used in addition to the mobile sink. Delay sensitive data is forwarded to the static sink, while the delay tolerant data is sent through the mobile sink. For QoS assurance, incoming traffic is divided into different traffic classes and each traffic class is assigned different priority based on their QoS requirement (bandwidth, delay) determine by its message type and content. Furthermore, to minimize delay in mobile sink data gathering, the mobile sink is moved throughout the network based on the priority messages at the nodes. Using these heuristics, QoSEM incur less end-to-end delay, is energy efficient, as well as being able to ensure QoS. Simulations are carried out to evaluate the performance of the proposed protocols of QoSEC, QoSES and QoSEM, by comparing their performance with the established contemporary protocols. Simulation results have demonstrated that when compared with contemporary protocols, each of the proposed protocol significantly prolong the network and coverage lifetime, as well as improve the other QoS routing parameters, such as delay, packet loss ratio, and throughput

Conical scan impact study. Volume 2: Small local user data processing facility

The impact of a conical scan versus a linear scan multispectral scanner (MSS) instrument on a small local-user data processing facility was studied. User data requirements were examined to determine the unique system rquirements for a low cost ground system (LCGS) compatible with the Earth Observatory Satellite (EOS) system. Candidate concepts were defined for the LCGS and preliminary designs were developed for selected concepts. The impact of a conical scan MSS versus a linear scan MSS was evaluated for the selected concepts. It was concluded that there are valid user requirements for the LCGS and, as a result of these requirements, the impact of the conical scanner is minimal, although some new hardware development for the LCGS is necessary to handle conical scan data

A feasibility study: Forest Fire Advanced System Technology (FFAST)

The National Aeronautics and Space Administration/Jet Propulsion Laboratory and the United States Department of Agriculture Forest Service completed a feasibility study that examined the potential uses of advanced technology in forest fires mapping and detection. The current and future (1990's) information needs in forest fire management were determined through interviews. Analysis shows that integrated information gathering and processing is needed. The emerging technologies that were surveyed and identified as possible candidates for use in an end to end system include ""push broom'' sensor arrays, automatic georeferencing, satellite communication links, near real or real time image processing, and data integration. Matching the user requirements and the technologies yielded a ""strawman'' system configuration. The feasibility study recommends and outlines the implementation of the next phase for this project, a two year, conceptual design phase to define a system that warrants continued development

Airborne Directional Networking: Topology Control Protocol Design

This research identifies and evaluates the impact of several architectural design choices in relation to airborne networking in contested environments related to autonomous topology control. Using simulation, we evaluate topology reconfiguration effectiveness using classical performance metrics for different point-to-point communication architectures. Our attention is focused on the design choices which have the greatest impact on reliability, scalability, and performance. In this work, we discuss the impact of several practical considerations of airborne networking in contested environments related to autonomous topology control modeling. Using simulation, we derive multiple classical performance metrics to evaluate topology reconfiguration effectiveness for different point-to-point communication architecture attributes for the purpose of qualifying protocol design elements

Multi-TRxPs for Industrial Automation with 5G URLLC Requirements

The Fifth Generation (5G) Ultra Reliable Low Latency Communication (URLLC) is envisioned to be one of the most promising drivers for many of the emerging use cases, including industrial automation. In this study, a factory scenario with mobile robots connected via a 5G network with two indoor cells is analyzed. The aim of this study is to analyze how URLLC requirements can be met with the aid of multi-Transmission Reception Points (TRxPs), for a scenario, which is interference limited. By means of simulations, it is shown that availability and reliability can be significantly improved by using multi-TRxPs, especially when the network becomes more loaded. In fact, optimized usage of multi-TRxPs can allow the factory to support a higher capacity while still meeting URLLC requirements. The results indicate that the choice of the number of TRxPs, which simultaneously transmit to a UE, and the locations of the TRxPs around the factory, is of high importance. A poor choice could worsen interference and lower reliability. The general conclusion is that it is best to deploy many TRxPs, but have the UE receive data from only one or maximum two at a time. Additionally, the TRxPs should be distributed enough in the factory to be able to properly improve the received signal, but far enough from the TRxPs of the other cell to limit the additional interference caused

Multi-dimensional data indexing and range query processing via Voronoi diagram for internet of things

In a typical Internet of Things (IoT) deployment such as smart cities and Industry 4.0, the amount of sensory data collected from physical world is significant and wide-ranging. Processing large amount of real-time data from the diverse IoT devices is challenging. For example, in IoT environment, wireless sensor networks (WSN) are typically used for the monitoring and collecting of data in some geographic area. Spatial range queries with location constraints to facilitate data indexing are traditionally employed in such applications, which allows the querying and managing the data based on SQL structure. One particular challenge is to minimize communication cost and storage requirements in multi-dimensional data indexing approaches. In this paper, we present an energy- and time-efficient multidimensional data indexing scheme, which is designed to answer range query. Specifically, we propose data indexing methods which utilize hierarchical indexing structures, using binary space partitioning (BSP), such as kd-tree, quad-tree, k-means clustering, and Voronoi-based methods to provide more efficient routing with less latency. Simulation results demonstrate that the Voronoi Diagram-based algorithm minimizes the average energy consumption and query response time