WIRELESS OPTICAL TRANSCEIVER DESIGN, LINK ANALISYS AND ALIGNMENT CONTROL FOR MOBILE COMMUNICATION

Pointing, acquisition and tracking of a free-space optical node in a mobile network experiencing misalignment due to adverse factors including vibration, motion and atmospheric turbulence requires a different approach than traditional free-space optical transceivers. A recent fiber-bundle approach for beam steering at the transmitter was investigated to provide continuous beam coverage at the receiver without the application of mechanical devices. Utilizing multiple fibers-lenses sets at the receiver was also proposed to enhance the tolerance of optical link misalignment. In this work, both laboratory experiments and software simulation were implemented to evaluate the optical link performance for different fiber-bundle-based transceiver setups as the link parameters were varied. The performance was evaluated in terms of the coverage area at the receiver, which is a measure of misalignment tolerance and is dependent not only on wavelength but on other key parameters such as link length, transmitted power, the pattern of transmitters, beam divergence, and the receiver construction. The results showed that fiber-bindle-based transceivers reveal significant potential to maximize the up time of the link, and the results also provide guidance on the further development of the overall system. To incorporate the proposed transceiver designs, an alignment control system was developed and evaluated as well. The laboratory results show that the optical control system successfully recovered and maintained the link while the receiver was in motion and the signal coverage at the target area was enhanced significantly

A Holistic Investigation on Terahertz Propagation and Channel Modeling Toward Vertical Heterogeneous Networks

User-centric and low latency communications can be enabled not only by small cells but also through ubiquitous connectivity. Recently, the vertical heterogeneous network (V-HetNet) architecture is proposed to backhaul/fronthaul a large number of small cells. Like an orchestra, the V-HetNet is a polyphony of different communication ensembles, including geostationary orbit (GEO), and low-earth orbit (LEO) satellites (e.g., CubeSats), and networked flying platforms (NFPs) along with terrestrial communication links. In this study, we propose the Terahertz (THz) communications to enable the elements of V-HetNets to function in harmony. As THz links offer a large bandwidth, leading to ultra-high data rates, it is suitable for backhauling and fronthauling small cells. Furthermore, THz communications can support numerous applications from inter-satellite links to in-vivo nanonetworks. However, to savor this harmony, we need accurate channel models. In this paper, the insights obtained through our measurement campaigns are highlighted, to reveal the true potential of THz communications in V-HetNets.Comment: It has been accepted for the publication in IEEE Communications Magazin

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

POINTING, ACQUISITION, AND TRACKING FOR DIRECTIONAL WIRELESS COMMUNICATIONS NETWORKS

Directional wireless communications networks (DWNs) are expected to become a workhorse of the military, as they provide great network capacity in hostile areas where omnidirectional RF systems can put their users in harm's way. These networks will also be able to adapt to new missions, change topologies, use different communications technologies, yet still reliably serve all their terminal users. DWNs also have the potential to greatly expand the capacity of civilian and commercial wireless communication. The inherently narrow beams present in these types of systems require a means of steering them, acquiring the links, and tracking to maintain connectivity. This area of technological challenges encompasses all the issues of pointing, acquisition, and tracking (PAT). iii The two main technologies for DWNs are Free-Space Optical (FSO) and millimeter wave RF (mmW). FSO offers tremendous bandwidths, long ranges, and uses existing fiber-based technologies. However, it suffers from severe turbulence effects when passing through long (>kms) atmospheric paths, and can be severely affected by obscuration. MmW systems do not suffer from atmospheric effects nearly as much, use much more sensitive coherent receivers, and have wider beam divergences allowing for easier pointing. They do, however, suffer from a lack of available small-sized power amplifiers, complicated RF infrastructure that must be steered with a platform, and the requirement that all acquisition and tracking be done with the data beam, as opposed to FSO which uses a beacon laser for acquisition and a fast steering mirror for tracking. This thesis analyzes the many considerations required for designing and implementing a FSO PAT system, and extends this work to the rapidly expanding area of mmW DWN systems. Different types of beam acquisition methods are simulated and tested, and the tradeoffs between various design specifications are analyzed and simulated to give insight into how to best implement a transceiver platform. An experimental test-bed of six FSO platforms is also designed and constructed to test some of these concepts, along with the implementation of a three-node biconnected network. Finally, experiments have been conducted to assess the performance of fixed infrastructure routing hardware when operating with a physically reconfigurable RF network

Characterisation of a reconfigurable free space optical interconnect system for parallel computing applications and experimental validation using rapid prototyping technology

Free-space optical interconnects (FSOIs) are widely seen as a potential solution to present and future bandwidth bottlenecks for parallel processing applications. This thesis will be focused on the study of a particular FSOI system called Optical Highway (OH). The OH is a polarised beam routing system which uses Polarising Beam Splitters and Liquid Crystals (PBS/LC) assemblies to perform reconfigurable interconnection networks. The properties of the OH make it suitable for implementing different passive static networks. A technology known as Rapid Prototyping (RP) will be employed for the first time in order to create optomechanical structures at low cost and low production times. Off-theshelf optical components will also be characterised in order to implement the OH. Additionally, properties such as reconfigurability, scalability, tolerance to misalignment and polarisation losses will be analysed. The OH will be modelled at three levels: node, optical stage and architecture. Different designs will be proposed and a particular architecture, Optimised Cut-Through Ring (OCTR), will be experimentally implemented. Finally, based on this architecture, a new set of properties will be defined in order to optimise the efficiency of the optical channels

MOBILE CUBESAT COMMAND AND CONTROL GROUND STATION ARCHITECTURE FOR FREE-SPACE OPTICAL COMMUNICATION RECEIVER

The United States military continues to encourage the need for robust satellite communications in order to successfully execute defense missions. CubeSats are a smaller-scale spacecraft, initially utilized to expand educational opportunities in the field of aerospace and satellite communications. This research explores both existing and potential ground station architecture options for integration of free-space optical communication downlinks from CubeSats. Future experimentation plans will focus on the application of this capability in more diverse environments to include expanded ground architecture opportunities. Systems engineering design and architecture methods are useful in understanding the current hardware and software options and limitations for future expansion opportunities. By considering a comparable planning approach, alternatives for architecture development can be organized to aid in the identification of control factors for sub-system and ground communication interfaces. As a well-established CubeSat communications system, the existing Mobile CubeSat Command and Control (MC3) architecture serves as an excellent candidate for experimental integration and eventual considerations for a planned proof of concept.Civilian, Naval Information Warfare CenterApproved for public release. Distribution is unlimited

Modular Optical Wireless Elements

Optical wireless has gained attention in recent years as an e cient and secure way to provide broadband connectivity to mobile platforms, isolated communities, and crowded public events. Companies like NASA, Google, Facebook, and others have demonstrated its potential. However, current optical wireless technology remains mostly heavy, bulky, and expensive, making it impractical for many scenarios and inaccessible to most students/researchers. This work presents the concept of Modular Optical Wireless Elements (MOWE), a novel system composed of multiple electrically interconnected optical modules (i.e., elements) forming a at or curved terminal that is inexpensive, lightweight, and easy-to-assemble. The technology enables cost-eff ective access to wide eld-of-view optical communication for last-mile broadband connectivity. Smart modules provide recon gurability, as well as local and central processing capabilities. The modules enable innovative short- and medium-range applications for free-space optics (FSO) in indoor communication and navigation, MIMO, and optical sensing, among others. This dissertation introduces the MOWE concept and provides in-depth information about modeling, analysis, hardware, and rmware, along with proof-of-concept examples and demonstrations. The notions of software-de ned optics and cognitive optics are introduced and analyzed in a MOWE context. Several experiments and case studies covering a wide spectrum of applications-from intelligent power control to passive beam steering-are presented in detail. This dissertation also discusses the future of MOWE technology and suggests possible improvements for high performance systems

Robust Optical Wireless Links over Turbulent Media using Diversity Solutions

Free-space optic (FSO) technology, i.e., optical wireless communication (OWC), is widely recognized as superior to radio frequency (RF) in many aspects. Visible and invisible optical wireless links solve first/last mile connectivity problems and provide secure, jam-free communication. FSO is license-free and delivers high-speed data rates in the order of Gigabits. Its advantages have fostered significant research efforts aimed at utilizing optical wireless communication, e.g. visible light communication (VLC), for high-speed, secure, indoor communication under the IEEE 802.15.7 standard. However, conventional optical wireless links demand precise optical alignment and suffer from atmospheric turbulence. When compared with RF, they suffer a low degree of reliability and lack robustness. Pointing errors cause optical transceiver misalignment, adversely affecting system reliability. Furthermore, atmospheric turbulence causes irradiance fluctuations and beam broadening of transmitted light. Innovative solutions to overcome limitations on the exploitation of high-speed optical wireless links are greatly needed.Spatial diversity is known to improve RF wireless communication systems. Similar diversity approaches can be adapted for FSO systems to improve its reliability and robustness; however, careful diversity design is needed since FSO apertures typically remain unbalanced as a result of FSO system sensitivity to misalignment. Conventional diversity combining schemes require persistent aperture monitoring and repetitive switching, thus increasing FSO implementation complexities. Furthermore, current RF diversity combining schemes may not be optimized to address the issue of unbalanced FSO receiving apertures.This dissertation investigates two efficient diversity combining schemes for multi-receiving FSO systems: switched diversity combining and generalized selection combining. Both can be exploited to reduce complexity and improve combining efficiency. Unlike maximum ratio combing, equal gain combining, and selective combining, switched diversity simplifies receiver design by avoiding unnecessary switching among receiving apertures. The most significant advantage of generalized combining is its ability to exclude apertures with low quality that could potentially affect the resultant output signal performance.This dissertation also investigates mobile FSO by considering a multi-receiving system in which all receiving FSO apertures are circularly placed on a platform. System mobility and performance are analyzed. Performance results confirm improvements when using angular diversity and generalized selection combining.The précis of this dissertation establishes the foundation of reliable FSO communications using efficient diversity-based solutions. Performance parameters are analyzed mathematically, and then evaluated using computer simulations. A testbed prototype is developed to facilitate the evaluation of optical wireless links via lab experiments