Free Level Threshold Zone (FLTZ) Logic For Mixed Analog-Digital Closed Loop Circuitry [TK7887.6. N335 2008 f rb].

Para penyelidik sentiasa mencari cara-cara penambahbaikan kaedah antara muka antara domain Analog dan Digital. Researchers have always look for ways to improve the interfacing method between the Analog and Digital domain

Platform-based design, test and fast verification flow for mixed-signal systems on chip

This research is providing methodologies to enhance the design phase from architectural space exploration and system study to verification of the whole mixed-signal system. At the beginning of the work, some innovative digital IPs have been designed to develop efficient signal conditioning for sensor systems on-chip that has been included in commercial products. After this phase, the main focus has been addressed to the creation of a re-usable and versatile test of the device after the tape-out which is close to become one of the major cost factor for ICs companies, strongly linking it to model’s test-benches to avoid re-design phases and multi-environment scenarios, producing a very effective approach to a single, fast and reliable multi-level verification environment. All these works generated different publications in scientific literature. The compound scenario concerning the development of sensor systems is presented in Chapter 1, together with an overview of the related market with a particular focus on the latest MEMS and MOEMS technology devices, and their applications in various segments. Chapter 2 introduces the state of the art for sensor interfaces: the generic sensor interface concept (based on sharing the same electronics among similar applications achieving cost saving at the expense of area and performance loss) versus the Platform Based Design methodology, which overcomes the drawbacks of the classic solution by keeping the generality at the highest design layers and customizing the platform for a target sensor achieving optimized performances. An evolution of Platform Based Design achieved by implementation into silicon of the ISIF (Intelligent Sensor InterFace) platform is therefore presented. ISIF is a highly configurable mixed-signal chip which allows designers to perform an effective design space exploration and to evaluate directly on silicon the system performances avoiding the critical and time consuming analysis required by standard platform based approach. In chapter 3 we describe the design of a smart sensor interface for conditioning next generation MOEMS. The adoption of a new, high performance and high integrated technology allow us to integrate not only a versatile platform but also a powerful ARM processor and various IPs providing the possibility to use the platform not only as a conditioning platform but also as a processing unit for the application. In this chapter a description of the various blocks is given, with a particular emphasis on the IP developed in order to grant the highest grade of flexibility with the minimum area occupation. The architectural space evaluation and the application prototyping with ISIF has enabled an effective, rapid and low risk development of a new high performance platform achieving a flexible sensor system for MEMS and MOEMS monitoring and conditioning. The platform has been design to cover very challenging test-benches, like a laser-based projector device. In this way the platform will not only be able to effectively handle the sensor but also all the system that can be built around it, reducing the needed for further electronics and resulting in an efficient test bench for the algorithm developed to drive the system. The high costs in ASIC development are mainly related to re-design phases because of missing complete top-level tests. Analog and digital parts design flows are separately verified. Starting from these considerations, in the last chapter a complete test environment for complex mixed-signal chips is presented. A semi-automatic VHDL-AMS flow to provide totally matching top-level is described and then, an evolution for fast self-checking test development for both model and real chip verification is proposed. By the introduction of a Python interface, the designer can easily perform interactive tests to cover all the features verification (e.g. calibration and trimming) into the design phase and check them all with the same environment on the real chip after the tape-out. This strategy has been tested on a consumer 3D-gyro for consumer application, in collaboration with SensorDynamics AG

On chopper effects in discrete-time ΣΔ modulators

Analog-to-digital converters based on ΣΔ modulators are used in a wide variety of applications. Due to their inherent monotonous behavior, high linearity, and large dynamic range, they are often the preferred option for sensor and instrumentation. Offset and flicker noise are usual concerns for this type of applications, and one way to minimize their effects is to use a chopper in the front-end integrator of the modulator. Due to its simple operation principle, the action of the chopper in the integrator is often overlooked. In this paper, we provide an analytical study of the static effects in ΣΔ modulators, which shows that the introduction of chopper is not transparent to the modulator operation and should thus be designed with care.This work has been partially funded by the Spanish Government project TEC-2007-68072 and the CSIC project 200850I213.Peer reviewe

On chopper effects in discrete-time ΣΔ modulators

Analog-to-digital converters based on ΣΔ modulators are used in a wide variety of applications. Due to their inherent monotonous behavior, high linearity, and large dynamic range, they are often the preferred option for sensor and instrumentation. Offset and flicker noise are usual concerns for this type of applications, and one way to minimize their effects is to use a chopper in the front-end integrator of the modulator. Due to its simple operation principle, the action of the chopper in the integrator is often overlooked. In this paper, we provide an analytical study of the static effects in ΣΔ modulators, which shows that the introduction of chopper is not transparent to the modulator operation and should thus be designed with care.Gobierno de España TEC-2007-68072Consejo Superior de Investigaciones Científicas 200850I21

A Monotonic Precise Current DAC for Sensor Applications

In this paper a 17 bit monotonic precise current DAC for sensor applications is described. It is working in a harsh automotive environment in a wide temperature range with high output voltage swing and low current consumption. To guarantee monotonicity current division and segmentation techniques are used. To improve the output impedance, the accuracy and the voltage compliance of the DAC, two active cascoding loops and one follower loop are used. The resolution of the DAC is further increased by applying pulse width modulation to one fine LSB current. To achieve low power consumption unused coarse current sources are switched off. Several second order technological effects influencing final performance and circuits dealing with them are discussed

Ultra Short Multiband AM/FM/DAB Active Antennas for Automotive Application

The length reduction of rod antennas is nowadays a major concern in the automotive industry. The need for new shorter rods stems from the desire to fulfil the design aesthetics of modern cars and to alleviate the mechanical issues the longer rods have. However, despite the severe length reduction, the short rods have to perform at least as good as the 40 cm long active monopoles usually met nowadays. In this context, the present thesis investigates the possibilities to use for AM, FM and DAB broadcast reception in an automotive environment 20 cm long active monopole antennas and 14 cm long active helical elements. Electrically very short active antennas are challenging because the very low effective height of the antenna element and its inconvenient antenna impedance with a highly reactive character pose important constrains upon the antenna amplifier. The amplifier has to have high input impedance, which has to be increasingly higher, as the antenna impedance gets also higher. At the same time, the amplifier has to exhibit enough gain and low noise character, in order to achieve good sensitivity. There are also important requirements to be fulfilled concerning its linearity

Class D Audio Amplifier

This project consisted of the design, construction, and comparison testing of two implementations of analog pulse-width modulation Class D audio amplifiers. The main goal of the project was to maximize the efficiency of the amplifier designs while maintaining a high-power, low-noise output signal. PCB testing confirmed that the amplifiers met our goals of greater than 90% efficiency, less than 1% total harmonic distortion and greater than 50 W output power