Software-based and regionally-oriented traffic management in Networks-on-Chip

Since the introduction of chip-multiprocessor systems, the number of integrated cores has been steady growing and workload applications have been adapted to exploit the increasing parallelism. This changed the importance of efficient on-chip communication significantly and the infrastructure has to keep step with these new requirements. The work at hand makes significant contributions to the state-of-the-art of the latest generation of such solutions, called Networks-on-Chip, to improve the performance, reliability, and flexible management of these on-chip infrastructures

High-speed, economical design implementation of transit network router

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1995.Includes bibliographical references (p. 88-90).by Kazuhiro Hara.M.S

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

로직 및 피지컬 합성에서의 타이밍 분석과 최적화

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 김태환.Timing analysis is one of the necessary steps in the development of a semiconductor circuit. In addition, it is increasingly important in the advanced process technologies due to various factors, including the increase of process–voltage–temperature variation. This dissertation addresses three problems related to timing analysis and optimization in logic and physical synthesis. Firstly, most static timing analysis today are based on conventional fixed flip-flop timing models, in which every flip-flop is assumed to have a fixed clock-to-Q delay. However, setup and hold skews affect the clock-to-Q delay in reality. In this dissertation, I propose a mathematical formulation to solve the problem and apply it to the clock skew scheduling problems as well as to the analysis of a given circuit, with a scalable speedup technique. Secondly, near-threshold computing is one of the promising concepts for energy-efficient operation of VLSI systems, but wide performance variation and nonlinearity to process variations block the proliferation. To cope with this, I propose a holistic hardware performance monitoring methodology for accurate timing prediction in a near-threshold voltage regime and advanced process technology. Lastly, an asynchronous circuit is one of the alternatives to the conventional synchronous style, and asynchronous pipeline circuit especially attractive because of its small design effort. This dissertation addresses the synthesis problem of lightening two-phase bundled-data asynchronous pipeline controllers, in which delay buffers are essential for guaranteeing the correct handshaking operation but incurs considerable area increase.타이밍 분석은 반도체 회로 개발 필수 과정 중 하나로, 최신 공정일수록 공정-전압-온도 변이 증가를 포함한 다양한 요인으로 하여금 그 중요성이 커지고 있다. 본 논문에서는 로직 및 피지컬 합성과 관련하여 세 가지 타이밍 분석 및 최적화 문제에 대해 다룬다. 첫째로, 오늘날 대부분의 정적 타이밍 분석은 모든 플립-플롭의 클럭-출력 딜레이가 고정된 값이라는 가정을 바탕으로 이루어졌다. 하지만 실제 클럭-출력 딜레이는 해당 플립-플롭의 셋업 및 홀드 스큐에 영향을 받는다. 본 논문에서는 이러한 특성을 수학적으로 정리하였으며, 이를 확장 가능한 속도 향상 기법과 더불어 주어진 회로의 타이밍 분석 및 클럭 스큐 스케쥴링 문제에 적용하였다. 둘째로, 유사 문턱 연산은 초고집적 회로 동작의 에너지 효율을 끌어 올릴 수 있다는 점에서 각광받지만, 큰 폭의 성능 변이 및 비선형성 때문에 널리 활용되고 있지 않다. 이를 해결하기 위해 유사 문턱 전압 영역 및 최신 공정 노드에서 보다 정확한 타이밍 예측을 위한 하드웨어 성능 모니터링 방법론 전반을 제안하였다. 마지막으로, 비동기 회로는 기존 동기 회로의 대안 중 하나로, 그 중에서도 비동기 파이프라인 회로는 비교적 적은 설계 노력만으로도 구현 가능하다는 장점이 있다. 본 논문에서는 2위상 묶음 데이터 프로토콜 기반 비동기 파이프라인 컨트롤러 상에서, 정확한 핸드셰이킹 통신을 위해 삽입된 딜레이 버퍼에 의한 면적 증가를 완화할 수 있는 합성 기법을 제시하였다.1 INTRODUCTION 1 1.1 Flexible Flip-Flop Timing Model 1 1.2 Hardware Performance Monitoring Methodology 4 1.3 Asynchronous Pipeline Controller 10 1.4 Contributions of this Dissertation 15 2 ANALYSIS AND OPTIMIZATION CONSIDERING FLEXIBLE FLIP-FLOP TIMING MODEL 17 2.1 Preliminaries 17 2.1.1 Terminologies 17 2.1.2 Timing Analysis 20 2.1.3 Clock-to-Q Delay Surface Modeling 21 2.2 Clock-to-Q Delay Interval Analysis 22 2.2.1 Derivation 23 2.2.2 Additional Constraints 26 2.2.3 Analysis: Finding Minimum Clock Period 28 2.2.4 Optimization: Clock Skew Scheduling 30 2.2.5 Scalable Speedup Technique 33 2.3 Experimental Results 37 2.3.1 Application to Minimum Clock Period Finding 37 2.3.2 Application to Clock Skew Scheduling 39 2.3.3 Efficacy of Scalable Speedup Technique 43 2.4 Summary 44 3 HARDWARE PERFORMANCE MONITORING METHODOLOGY AT NTC AND ADVANCED TECHNOLOGY NODE 45 3.1 Overall Flow of Proposed HPM Methodology 45 3.2 Prerequisites to HPM Methodology 47 3.2.1 BEOL Process Variation Modeling 47 3.2.2 Surrogate Model Preparation 49 3.3 HPM Methodology: Design Phase 52 3.3.1 HPM2PV Model Construction 52 3.3.2 Optimization of Monitoring Circuits Configuration 54 3.3.3 PV2CPT Model Construction 58 3.4 HPM Methodology: Post-Silicon Phase 60 3.4.1 Transfer Learning in Silicon Characterization Step 60 3.4.2 Procedures in Volume Production Phase 61 3.5 Experimental Results 62 3.5.1 Experimental Setup 62 3.5.2 Exploration of Monitoring Circuits Configuration 64 3.5.3 Effectiveness of Monitoring Circuits Optimization 66 3.5.4 Considering BEOL PVs and Uncertainty Learning 68 3.5.5 Comparison among Different Prediction Flows 69 3.5.6 Effectiveness of Prediction Model Calibration 71 3.6 Summary 73 4 LIGHTENING ASYNCHRONOUS PIPELINE CONTROLLER 75 4.1 Preliminaries and State-of-the-Art Work 75 4.1.1 Bundled-data vs. Dual-rail Asynchronous Circuits 75 4.1.2 Two-phase vs. Four-phase Bundled-data Protocol 76 4.1.3 Conventional State-of-the-Art Pipeline Controller Template 77 4.2 Delay Path Sharing for Lightening Pipeline Controller Template 78 4.2.1 Synthesizing Sharable Delay Paths 78 4.2.2 Validating Logical Correctness for Sharable Delay Paths 80 4.2.3 Reformulating Timing Constraints of Controller Template 81 4.2.4 Minimally Allocating Delay Buffers 87 4.3 In-depth Pipeline Controller Template Synthesis with Delay Path Reusing 88 4.3.1 Synthesizing Delay Path Units 88 4.3.2 Validating Logical Correctness of Delay Path Units 89 4.3.3 Updating Timing Constraints for Delay Path Units 91 4.3.4 In-depth Synthesis Flow Utilizing Delay Path Units 95 4.4 Experimental Results 99 4.4.1 Environment Setup 99 4.4.2 Piecewise Linear Modeling of Delay Path Unit Area 99 4.4.3 Comparison of Power, Performance, and Area 102 4.5 Summary 107 5 CONCLUSION 109 5.1 Chapter 2 109 5.2 Chapter 3 110 5.3 Chapter 4 110 Abstract (In Korean) 127Docto

Sincronização em sistemas integrados a alta velocidade

Doutoramento em Engenharia ElectrotécnicaA distribui ção de um sinal relógio, com elevada precisão espacial (baixo skew) e temporal (baixo jitter ), em sistemas sí ncronos de alta velocidade tem-se revelado uma tarefa cada vez mais demorada e complexa devido ao escalonamento da tecnologia. Com a diminuição das dimensões dos dispositivos e a integração crescente de mais funcionalidades nos Circuitos Integrados (CIs), a precisão associada as transições do sinal de relógio tem sido cada vez mais afectada por varia ções de processo, tensão e temperatura. Esta tese aborda o problema da incerteza de rel ogio em CIs de alta velocidade, com o objetivo de determinar os limites do paradigma de desenho sí ncrono. Na prossecu ção deste objectivo principal, esta tese propõe quatro novos modelos de incerteza com âmbitos de aplicação diferentes. O primeiro modelo permite estimar a incerteza introduzida por um inversor est atico CMOS, com base em parâmetros simples e su cientemente gen éricos para que possa ser usado na previsão das limitações temporais de circuitos mais complexos, mesmo na fase inicial do projeto. O segundo modelo, permite estimar a incerteza em repetidores com liga ções RC e assim otimizar o dimensionamento da rede de distribui ção de relógio, com baixo esfor ço computacional. O terceiro modelo permite estimar a acumula ção de incerteza em cascatas de repetidores. Uma vez que este modelo tem em considera ção a correla ção entre fontes de ruí do, e especialmente util para promover t ecnicas de distribui ção de rel ogio e de alimentação que possam minimizar a acumulação de incerteza. O quarto modelo permite estimar a incerteza temporal em sistemas com m ultiplos dom ínios de sincronismo. Este modelo pode ser facilmente incorporado numa ferramenta autom atica para determinar a melhor topologia para uma determinada aplicação ou para avaliar a tolerância do sistema ao ru ído de alimentação. Finalmente, usando os modelos propostos, são discutidas as tendências da precisão de rel ogio. Conclui-se que os limites da precisão do rel ogio são, em ultima an alise, impostos por fontes de varia ção dinâmica que se preveem crescentes na actual l ogica de escalonamento dos dispositivos. Assim sendo, esta tese defende a procura de solu ções em outros ní veis de abstração, que não apenas o ní vel f sico, que possam contribuir para o aumento de desempenho dos CIs e que tenham um menor impacto nos pressupostos do paradigma de desenho sí ncrono.Distributing a the clock simultaneously everywhere (low skew) and periodically everywhere (low jitter) in high-performance Integrated Circuits (ICs) has become an increasingly di cult and time-consuming task, due to technology scaling. As transistor dimensions shrink and more functionality is packed into an IC, clock precision becomes increasingly a ected by Process, Voltage and Temperature (PVT) variations. This thesis addresses the problem of clock uncertainty in high-performance ICs, in order to determine the limits of the synchronous design paradigm. In pursuit of this main goal, this thesis proposes four new uncertainty models, with di erent underlying principles and scopes. The rst model targets uncertainty in static CMOS inverters. The main advantage of this model is that it depends only on parameters that can easily be obtained. Thus, it can provide information on upcoming constraints very early in the design stage. The second model addresses uncertainty in repeaters with RC interconnects, allowing the designer to optimise the repeater's size and spacing, for a given uncertainty budget, with low computational e ort. The third model, can be used to predict jitter accumulation in cascaded repeaters, like clock trees or delay lines. Because it takes into consideration correlations among variability sources, it can also be useful to promote oorplan-based power and clock distribution design in order to minimise jitter accumulation. A fourth model is proposed to analyse uncertainty in systems with multiple synchronous domains. It can be easily incorporated in an automatic tool to determine the best topology for a given application or to evaluate the system's tolerance to power-supply noise. Finally, using the proposed models, this thesis discusses clock precision trends. Results show that limits in clock precision are ultimately imposed by dynamic uncertainty, which is expected to continue increasing with technology scaling. Therefore, it advocates the search for solutions at other abstraction levels, and not only at the physical level, that may increase system performance with a smaller impact on the assumptions behind the synchronous design paradigm

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Methoden und Beschreibungssprachen zur Modellierung und Verifikation vonSchaltungen und Systemen: MBMV 2015 - Tagungsband, Chemnitz, 03. - 04. März 2015

Der Workshop Methoden und Beschreibungssprachen zur Modellierung und Verifikation von Schaltungen und Systemen (MBMV 2015) findet nun schon zum 18. mal statt. Ausrichter sind in diesem Jahr die Professur Schaltkreis- und Systementwurf der Technischen Universität Chemnitz und das Steinbeis-Forschungszentrum Systementwurf und Test. Der Workshop hat es sich zum Ziel gesetzt, neueste Trends, Ergebnisse und aktuelle Probleme auf dem Gebiet der Methoden zur Modellierung und Verifikation sowie der Beschreibungssprachen digitaler, analoger und Mixed-Signal-Schaltungen zu diskutieren. Er soll somit ein Forum zum Ideenaustausch sein. Weiterhin bietet der Workshop eine Plattform für den Austausch zwischen Forschung und Industrie sowie zur Pflege bestehender und zur Knüpfung neuer Kontakte. Jungen Wissenschaftlern erlaubt er, ihre Ideen und Ansätze einem breiten Publikum aus Wissenschaft und Wirtschaft zu präsentieren und im Rahmen der Veranstaltung auch fundiert zu diskutieren. Sein langjähriges Bestehen hat ihn zu einer festen Größe in vielen Veranstaltungskalendern gemacht. Traditionell sind auch die Treffen der ITGFachgruppen an den Workshop angegliedert. In diesem Jahr nutzen zwei im Rahmen der InnoProfile-Transfer-Initiative durch das Bundesministerium für Bildung und Forschung geförderte Projekte den Workshop, um in zwei eigenen Tracks ihre Forschungsergebnisse einem breiten Publikum zu präsentieren. Vertreter der Projekte Generische Plattform für Systemzuverlässigkeit und Verifikation (GPZV) und GINKO - Generische Infrastruktur zur nahtlosen energetischen Kopplung von Elektrofahrzeugen stellen Teile ihrer gegenwärtigen Arbeiten vor. Dies bereichert denWorkshop durch zusätzliche Themenschwerpunkte und bietet eine wertvolle Ergänzung zu den Beiträgen der Autoren. [... aus dem Vorwort

Techniques of Energy-Efficient VLSI Chip Design for High-Performance Computing

How to implement quality computing with the limited power budget is the key factor to move very large scale integration (VLSI) chip design forward. This work introduces various techniques of low power VLSI design used for state of art computing. From the viewpoint of power supply, conventional in-chip voltage regulators based on analog blocks bring the large overhead of both power and area to computational chips. Motivated by this, a digital based switchable pin method to dynamically regulate power at low circuit cost has been proposed to make computing to be executed with a stable voltage supply. For one of the widely used and time consuming arithmetic units, multiplier, its operation in logarithmic domain shows an advantageous performance compared to that in binary domain considering computation latency, power and area. However, the introduced conversion error reduces the reliability of the following computation (e.g. multiplication and division.). In this work, a fast calibration method suppressing the conversion error and its VLSI implementation are proposed. The proposed logarithmic converter can be supplied by dc power to achieve fast conversion and clocked power to reduce the power dissipated during conversion. Going out of traditional computation methods and widely used static logic, neuron-like cell is also studied in this work. Using multiple input floating gate (MIFG) metal-oxide semiconductor field-effect transistor (MOSFET) based logic, a 32-bit, 16-operation arithmetic logic unit (ALU) with zipped decoding and a feedback loop is designed. The proposed ALU can reduce the switching power and has a strong driven-in capability due to coupling capacitors compared to static logic based ALU. Besides, recent neural computations bring serious challenges to digital VLSI implementation due to overload matrix multiplications and non-linear functions. An analog VLSI design which is compatible to external digital environment is proposed for the network of long short-term memory (LSTM). The entire analog based network computes much faster and has higher energy efficiency than the digital one