A 2x2 MIMO DVB-T2 System: Design, New Channel Estimation Scheme and Measurements With Polarization Diversity

The increasing interest in MIMO (Multiple-Input Multiple-Output) systems has given rise to a prolific research activity in recent years. Both theoretical and practical issues have been studied. However, so far few MIMO testbeds or prototypes have been built for DVB-T or future standards. In this paper, a novel 2 × 2 MIMO testbed specifically designed for evaluating the performances of a DVB-T2 MIMO system is presented. The description of signal processing is detailed including a new scheme to estimate the MIMO channel matrix. Finally, measurement results with different polarization schemes are presented for typical scenarios, obtaining higher capacity in LoS situations using polarization diversity

Laboratory and field trials evaluation of transmit delay Diversity applied to DVB-T/H networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The requirements for future DVB-T/H networks demand that broadcasters design and deploy networks that provide ubiquitous reception in challenging indoors and other obstructed situations. It is essential that such networks are designed cost-effectively and with minimized environmental impact. The use of transmit diversity techniques with multiple antennas have long been proposed to improve the performance and capacity of wireless systems. Transmit diversity exploits the scattering effect inherent in the channel by means of transmitting multiple signals in a controlled manner from spatially separated antennas, allowing independently faded signals to arrive at the receiver and improves the chances of decoding a signal of acceptable quality. Transmit diversity can complement receive diversity by adding an additional diversity gain and in situations where receiver diversity is not practical, transmit diversity alone delivers a comparable amount of diversity gain. Transmit Delay Diversity (DD) can be applied to systems employing the DVB standard without receiver equipment modifications. Although transmit DD can provide a gain in NLOS situations, it can introduce degradation in LOS situation. The aim of this thesis is to investigate the effectiveness in real-word applications of novel diversity techniques for broadcast transmitter networks. Tests involved laboratory experiments using a wireless MIMO channel emulator and the deployment of a field measurement campaign dedicated to driving, indoor and rooftop reception. The relationship between the diversity gain, the propagation environment and several parameters such as the transmit antenna separation, the receiver speed and the Forward Error Correction Codes (FEC) configuration are investigated. Results includes the effect of real-word parameter usually not modeled in the software simulation analysis, such as antenna radiation patterns and mutual coupling, scattering vegetation impact, non-Gaussian noise sources and receiver implementation. Moreover, a practical analysis of the effectiveness of experimental techniques to mitigate the loss due to transmit DD loss in rooftop reception is presented. The results of this thesis confirmed, completed and extended the existing predictions with real word measurement results

On the feasibility of the communications in the TVWS spectrum analysis and coexistence issue

In the last decade, the enormous growth in the wireless industry has come from using only a small part of the wireless spectrum, nominally less than 10% under 3 GHz. Nowadays, the vast majority of the available spectral resources have already been licensed. Measurements made by the Federal Communication Commission (FCC) have shown that a great part of the spectrum, although allocated, is virtually unused. For all this reasons, in the last years, several countries have already (USA) or are in the process (EU, China, Japan, South Korea) of switching off analog TV broadcasting in favor of Digital Terrestrial Television (DTT) broadcasting systems and digital switchover plans have driven a thorough review of TV spectrum exploitation. The resulting unused channels within this band are called “TV white spaces” (TVWS). Even after the redistribution of the digital TV channels, the problem of an efficient utilization of the allocated frequencies is still far from being solved. For example, there are still large territorial areas on which, although allocated, the TV channels result unused, due to coverage problems. New spectrum allocation approaches such as the dynamic spectrum access method have been studied. This new concept implies that the radio terminals have the capacity to monitor their own radio environment and consequently adapt to the transmission conditions on whatever frequency band are available (adaptive radio). If this concept is supplemented with the capacity of analyzing the surrounding radio environment in search of white spaces, the term adaptive radio is extended to Cognitive Radio (CR). The spectrum management rule of CR is that all new users for the spectrum are secondary (cognitive) users (SU) and requires that they must detect and avoid the primary (licensed) users (PU) in terms of used frequencies, transmission power and modulation scheme. In the TV bands specifically, the presence of PUs (e.g. TV broadcasters) can be revealed both performing a spectrum sensing operation and considering the information provided by the external databases called “geo-location databases” (GL-DB). The database provides, for a certain location, the list of the free TV channels and the allowable maximum effective isotropic radiated power (EIRP) for transmitting without harmful interference to incumbent users. Decision thresholds are still a critical parameter for protecting services in a scenario where cognitive devices would be operating. There are cases where the approach based on GL Spectrum Occupancy DB might not be available, either because the database does not exist for that area (for example in non densely populated areas) or in the case that access to the database is not possible (deep indoor operation, low populated areas etc.). Several studies have suggested that radio noise has increased significantly over the last decades and consequently the assumptions about decision thresholds and interference protection ratios might be outdated. The Hidden Node Margin (HNM) is a parameter that quantifies the difference between the potential interfered signal values at the location where it is measured or estimated by the cognitive device, and the actual value at the location where the receiving antenna for this signal is located. HNM is a key parameter to define the protection requirements that cognitive devices must comply in order not to create any harmful interference to broadcast receiving systems. In this context, this thesis goes in a precise direction, with four main topics related to the feasibility of communication cognitive systems operating in the TVWS, considering coexistence as the main operational issue. The first topic studies new spectrum sensing approaches in order to improve the more critical functionality of CRs. In the second topic an unlicensed indoor short-range distribution system for the wireless retransmission in the DTT band of High definition TV (HDTV) contents with immediate implementations as home entertainment systems has been carried out. The third topic of this thesis is about a particular database developed in order to provide information to easily calculate HNM values and associated statistics, TV Channel Occupancy and Man Made Noise Upper Limits. The empirical data for this work has been recorded in different locations of Spain and Italy during 2011 and 2012 thanks to the partnership between the Department of Electrical and Electronic Engineering (D.I.E.E.) of the University of Cagliari and the Department of Electronics and Telecommunications of the University of Bilbao (UPV/EHU). Finally in the last topic we focus on the IEEE 802.22 WRAN standard evaluating, thanks to extended measurements, the performance of an 802.22 system operating into the same coverage range of a DTT receiver

Fifty Years of Noise Modeling and Mitigation in Power-Line Communications.

Building on the ubiquity of electric power infrastructure, power line communications (PLC) has been successfully used in diverse application scenarios, including the smart grid and in-home broadband communications systems as well as industrial and home automation. However, the power line channel exhibits deleterious properties, one of which is its hostile noise environment. This article aims for providing a review of noise modeling and mitigation techniques in PLC. Specifically, a comprehensive review of representative noise models developed over the past fifty years is presented, including both the empirical models based on measurement campaigns and simplified mathematical models. Following this, we provide an extensive survey of the suite of noise mitigation schemes, categorizing them into mitigation at the transmitter as well as parametric and non-parametric techniques employed at the receiver. Furthermore, since the accuracy of channel estimation in PLC is affected by noise, we review the literature of joint noise mitigation and channel estimation solutions. Finally, a number of directions are outlined for future research on both noise modeling and mitigation in PLC

Proceedings of the Fifteenth NASA Propagation Experimenters Meeting (NAPEX 15) and the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop

The NASA Propagation Experimenters Meeting (NAPEX), supported by the NASA Propagation Program, is convened annually to discuss studies made on radio wave propagation by investigators from domestic and international organizations. The meeting was organized into three technical sessions. The first session was dedicated to Olympus and ACTS studies and experiments, the second session was focused on the propagation studies and measurements, and the third session covered computer-based propagation model development. In total, sixteen technical papers and some informal contributions were presented. Following NAPEX 15, the Advanced Communications Technology Satellite (ACTS) miniworkshop was held on 29 Jun. 1991, to review ACTS propagation activities, with emphasis on ACTS hardware development and experiment planning. Five papers were presented

Coded-OFDM for PLC systems in non-Gaussian noise channels

PhD ThesisNowadays, power line communication (PLC) is a technology that uses the power line grid for communication purposes along with transmitting electrical energy, for providing broadband services to homes and offices such as high-speed data, audio, video and multimedia applications. The advantages of this technology are to eliminate the need for new wiring and AC outlet plugs by using an existing infrastructure, ease of installation and reduction of the network deployment cost. However, the power line grid is originally designed for the transmission of the electric power at low frequencies; i.e. 50/60 Hz. Therefore, the PLC channel appears as a harsh medium for low-power high-frequency communication signals. The development of PLC systems for providing high-speed communication needs precise knowledge of the channel characteristics such as the attenuation, non-Gaussian noise and selective fading. Non-Gaussian noise in PLC channels can classify into Nakagami-m background interference (BI) noise and asynchronous impulsive noise (IN) modelled by a Bernoulli-Gaussian mixture (BGM) model or Middleton class A (MCA) model. Besides the effects of the multipath PLC channel, asynchronous impulsive noise is the main reason causing performance degradation in PLC channels. Binary/non-binary low-density parity check B/NB-(LDPC) codes and turbo codes (TC) with soft iterative decoders have been proposed for Orthogonal Frequency Division Multiplexing (OFDM) system to improve the bit error rate (BER) performance degradation by exploiting frequency diversity. The performances are investigated utilizing high-order quadrature amplitude modulation (QAM) in the presence of non-Gaussian noise over multipath broadband power-line communication (BBPLC) channels. OFDM usually spreads the effect of IN over multiple sub-carriers after discrete Fourier transform (DFT) operation at the receiver, hence, it requires only a simple single-tap zero forcing (ZF) equalizer at the receiver. The thesis focuses on improving the performance of iterative decoders by deriving the effective, complex-valued, ratio distributions of the noise samples at the zeroforcing (ZF) equalizer output considering the frequency-selective multipath PLCs, background interference noise and impulsive noise, and utilizing the outcome for computing the apriori log likelihood ratios (LLRs) required for soft decoding algorithms. On the other hand, Physical-Layer Network Coding (PLNC) is introduced to help the PLC system to extend the range of operation for exchanging information between two users (devices) using an intermediate relay (hub) node in two-time slots in the presence of non-Gaussian noise over multipath PLC channels. A novel detection scheme is proposed to transform the transmit signal constellation based on the frequency-domain channel coefficients to optimize detection at the relay node with newly derived noise PDF at the relay and end nodes. Additionally, conditions for optimum detection utilizing a high-order constellation are derived. The closedform expressions of the BER and average BER upper-bound (AUB) are derived for a point-to-point system, and for a PLNC system at the end node to relay, relay to end node and at the end-to-end nodes. Moreover, the convergence behaviour of iterative decoders is evaluated using EXtrinsic Information Transfer (EXIT) chart analysis and upper bound analyses. Furthermore, an optimization of the threshold determination for clipping and blanking impulsive noise mitigation methods are derived. The proposed systems are compared in performance using simulation in MATLAB and analytical methods.Ministry of Higher Education in Ira

Communications protocols for wireless sensor networks in perturbed environment

This thesis is mainly in the Smart Grid (SG) domain. SGs improve the safety of electrical networks and allow a more adapted use of electricity storage, available in a limited way. SGs also increase overall energy efficiency by reducing peak consumption. The use of this technology is the most appropriate solution because it allows more efficient energy management. In this context, manufacturers such as Hydro-Quebec deploy sensor networks in the nerve centers to control major equipment. To reduce deployment costs and cabling complexity, the option of a wireless sensor network seems the most obvious solution. However, deploying a sensor network requires in-depth knowledge of the environment. High voltages substations are strategic points in the power grid and generate impulse noise that can degrade the performance of wireless communications. The works in this thesis are focused on the development of high performance communication protocols for the profoundly disturbed environments. For this purpose, we have proposed an approach based on the concatenation of rank metric and convolutional coding with orthogonal frequency division multiplexing. This technique is very efficient in reducing the bursty nature of impulsive noise while having a quite low level of complexity. Another solution based on a multi-antenna system is also designed. We have proposed a cooperative closed-loop coded MIMO system based on rank metric code and max−dmin precoder. The second technique is also an optimal solution for both improving the reliability of the system and energy saving in wireless sensor networks

Proceedings of the Fourteenth NASA Propagation Experimenters Meeting (NAPEX 14) and the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop

The NASA Propagation Experimenters Meeting (NAPEX), supported by the NASA Propagation Program, is convened annually to discuss studies made on radio wave propagation by investigators from domestic and international organizations. NAPEX XIV was held on May 11, 1990, at the Balcones Research Centers, University of Texas, Austin, Texas. The meeting was organized into two technical sessions: Satellite (ACTS) and the Olympus Spacecraft, while the second focused on the fixed and mobile satellite propagation studies and experiments. Following NAPEX XIV, the ACTS Miniworkshop was held at the Hotel Driskill, Austin, Texas, on May 12, 1990, to review ACTS propagation activities since the First ACTS Propagation Studies Workshop was held in Santa Monica, California, on November 28 and 29, 1989

OFDM base T-transform for wireless communication networks

The prominent features associated with orthogonal frequency division multiplexing (OFDM) have been exploited in the area of high-speed communication networks. However, OFDM is prone to impairments such as frequency selective fading channel, high peak-to-average power ratio (PAPR) and heavy-tailed distributed impulsive noise, all of which can have negative impacts on its performance. These issues have received a great deal of attention in recent research. To compensate for these transmission impairments, a T-OFDM based system is introduced using a low computational complexity T-transform that combines the Walsh-Hadamard transform (WHT) and the discrete Fourier transform (DFT) into a single fast orthonormal unitary transform. The key contribution in this thesis is on the use of the T-transform along with three novel receiver designs. Additionally, new theoretical bit error rate (BER) formulae for the T-OFDM system are derived over communications channels using zero forcing (ZF) and minimum mean square error (MMSE) detectors, that are validated via simulation and shown to have close performance with the obtained performance results. It has been found that the T-OFDM outperformed the conventional OFDM based systems in the investigated channel models by achieving a signal-to-noise ratio (SNR) gain range of between 9dB and 16dB measured at 10−4 BER. In addition, the sparsity and block diagonal structure of the T-transform, along with its lower summation processes are exploited in this study to reduce the superposition of the subcarriers, leading to reduce the peak of the transmitted signals by a range of 0.75 to 1.2 dB with preserved average power. Furthermore, these attractive features of T-transform are employed with the conventional selective mapping (SLM) and partial transmitted sequences (PTS) schemes to propose three low cost novel techniques; T-SLM, T-PTS-I, and T-PTS-II. Compared to the conventional schemes, the T-SLM and T-PTS-I schemes have achieved a considerable reduction in both computational complexity and in PAPR, further increasing multipath resilience, even in the presence of high power amplifier (HPA). Whereas using the T-PTS-II scheme, the complexity ratio has been significantly reduced by approximately 80%, as well as reducing the SI bits further by two, with negligible PAPR degradation. Moreover, the effect of the independent sections of T-transform on the performance of T-OFDM system over the impulsive channel is addressed in this work, by deriving a new theoretical BER formula over such a transmission media. Furthermore, two novel II schemes WHT-MI-OFDM and WHT-MI-OFDM incorporating nonlinear blanking, both of which utilise the WHT and a matrix interleaver (MI) with the OFDM system, are proposed to suppress the deleterious effects of a severe impulsive noise burst on the T-OFDM system performance. Comparing with the traditional MI-OFDM system, the proposed schemes are much more robust to disturbances arising from the impulsive channel.EThOS - Electronic Theses Online ServiceMinistry of Higher Education and Scientific ResearchIraqGBUnited Kingdo

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin