254 research outputs found
Encountering distributed denial of service attack utilizing federated software defined network
This research defines the distributed denial of service (DDoS) problem in software-defined-networks (SDN) environments. The proposes solution uses Software defined networks capabilities to reduce risk, introduces a collaborative, distributed defense mechanism rather than server-side filtration. Our proposed network detection and prevention agent (NDPA) algorithm negotiates the maximum amount of traffic allowed to be passed to server by reconfiguring network switches and routers to reduce the ports' throughput of the network devices by the specified limit ratio. When the passed traffic is back to normal, NDPA starts network recovery to normal throughput levels, increasing ports' throughput by adding back the limit ratio gradually each time cycle. The simulation results showed that the proposed algorithms successfully detected and prevented a DDoS attack from overwhelming the targeted server. The server was able to coordinate its operations with the SDN controllers through a communication mechanism created specifically for this purpose. The system was also able to determine when the attack was over and utilize traffic engineering to improve the quality of service (QoS). The solution was designed with a sophisticated way and high level of separation of duties between components so it would not be affected by the design aspect of the network architecture
A critical review of cyber-physical security for building automation systems
Modern Building Automation Systems (BASs), as the brain that enables the
smartness of a smart building, often require increased connectivity both among
system components as well as with outside entities, such as optimized
automation via outsourced cloud analytics and increased building-grid
integrations. However, increased connectivity and accessibility come with
increased cyber security threats. BASs were historically developed as closed
environments with limited cyber-security considerations. As a result, BASs in
many buildings are vulnerable to cyber-attacks that may cause adverse
consequences, such as occupant discomfort, excessive energy usage, and
unexpected equipment downtime. Therefore, there is a strong need to advance the
state-of-the-art in cyber-physical security for BASs and provide practical
solutions for attack mitigation in buildings. However, an inclusive and
systematic review of BAS vulnerabilities, potential cyber-attacks with impact
assessment, detection & defense approaches, and cyber-secure resilient control
strategies is currently lacking in the literature. This review paper fills the
gap by providing a comprehensive up-to-date review of cyber-physical security
for BASs at three levels in commercial buildings: management level, automation
level, and field level. The general BASs vulnerabilities and protocol-specific
vulnerabilities for the four dominant BAS protocols are reviewed, followed by a
discussion on four attack targets and seven potential attack scenarios. The
impact of cyber-attacks on BASs is summarized as signal corruption, signal
delaying, and signal blocking. The typical cyber-attack detection and defense
approaches are identified at the three levels. Cyber-secure resilient control
strategies for BASs under attack are categorized into passive and active
resilient control schemes. Open challenges and future opportunities are finally
discussed.Comment: 38 pages, 7 figures, 6 tables, submitted to Annual Reviews in Contro
Deep Learning -Powered Computational Intelligence for Cyber-Attacks Detection and Mitigation in 5G-Enabled Electric Vehicle Charging Station
An electric vehicle charging station (EVCS) infrastructure is the backbone of transportation electrification. However, the EVCS has various cyber-attack vulnerabilities in software, hardware, supply chain, and incumbent legacy technologies such as network, communication, and control. Therefore, proactively monitoring, detecting, and defending against these attacks is very important. The state-of-the-art approaches are not agile and intelligent enough to detect, mitigate, and defend against various cyber-physical attacks in the EVCS system. To overcome these limitations, this dissertation primarily designs, develops, implements, and tests the data-driven deep learning-powered computational intelligence to detect and mitigate cyber-physical attacks at the network and physical layers of 5G-enabled EVCS infrastructure. Also, the 5G slicing application to ensure the security and service level agreement (SLA) in the EVCS ecosystem has been studied. Various cyber-attacks such as distributed denial of services (DDoS), False data injection (FDI), advanced persistent threats (APT), and ransomware attacks on the network in a standalone 5G-enabled EVCS environment have been considered. Mathematical models for the mentioned cyber-attacks have been developed. The impact of cyber-attacks on the EVCS operation has been analyzed. Various deep learning-powered intrusion detection systems have been proposed to detect attacks using local electrical and network fingerprints. Furthermore, a novel detection framework has been designed and developed to deal with ransomware threats in high-speed, high-dimensional, multimodal data and assets from eccentric stakeholders of the connected automated vehicle (CAV) ecosystem. To mitigate the adverse effects of cyber-attacks on EVCS controllers, novel data-driven digital clones based on Twin Delayed Deep Deterministic Policy Gradient (TD3) Deep Reinforcement Learning (DRL) has been developed. Also, various Bruteforce, Controller clones-based methods have been devised and tested to aid the defense and mitigation of the impact of the attacks of the EVCS operation. The performance of the proposed mitigation method has been compared with that of a benchmark Deep Deterministic Policy Gradient (DDPG)-based digital clones approach. Simulation results obtained from the Python, Matlab/Simulink, and NetSim software demonstrate that the cyber-attacks are disruptive and detrimental to the operation of EVCS. The proposed detection and mitigation methods are effective and perform better than the conventional and benchmark techniques for the 5G-enabled EVCS
Per-host DDoS mitigation by direct-control reinforcement learning
DDoS attacks plague the availability of online services today, yet like many cybersecurity problems are evolving and non-stationary. Normal and attack patterns shift as new protocols and applications are introduced, further compounded by burstiness and seasonal variation. Accordingly, it is difficult to apply machine learning-based techniques and defences in practice. Reinforcement learning (RL) may overcome this detection problem for DDoS attacks by managing and monitoring consequences; an agent’s role is to learn to optimise performance criteria (which are always available) in an online manner. We advance the state-of-the-art in RL-based DDoS mitigation by introducing two agent classes designed to act on a per-flow basis, in a protocol-agnostic manner for any network topology. This is supported by an in-depth investigation of feature suitability and empirical evaluation. Our results show the existence of flow features with high predictive power for different traffic classes, when used as a basis for feedback-loop-like control. We show that the new RL agent models can offer a significant increase in goodput of legitimate TCP traffic for many choices of host density
A Survey on Data Plane Programming with P4: Fundamentals, Advances, and Applied Research
With traditional networking, users can configure control plane protocols to
match the specific network configuration, but without the ability to
fundamentally change the underlying algorithms. With SDN, the users may provide
their own control plane, that can control network devices through their data
plane APIs. Programmable data planes allow users to define their own data plane
algorithms for network devices including appropriate data plane APIs which may
be leveraged by user-defined SDN control. Thus, programmable data planes and
SDN offer great flexibility for network customization, be it for specialized,
commercial appliances, e.g., in 5G or data center networks, or for rapid
prototyping in industrial and academic research. Programming
protocol-independent packet processors (P4) has emerged as the currently most
widespread abstraction, programming language, and concept for data plane
programming. It is developed and standardized by an open community and it is
supported by various software and hardware platforms. In this paper, we survey
the literature from 2015 to 2020 on data plane programming with P4. Our survey
covers 497 references of which 367 are scientific publications. We organize our
work into two parts. In the first part, we give an overview of data plane
programming models, the programming language, architectures, compilers,
targets, and data plane APIs. We also consider research efforts to advance P4
technology. In the second part, we analyze a large body of literature
considering P4-based applied research. We categorize 241 research papers into
different application domains, summarize their contributions, and extract
prototypes, target platforms, and source code availability.Comment: Submitted to IEEE Communications Surveys and Tutorials (COMS) on
2021-01-2
MFIRE-2: A Multi Agent System for Flow-based Intrusion Detection Using Stochastic Search
Detecting attacks targeted against military and commercial computer networks is a crucial element in the domain of cyberwarfare. The traditional method of signature-based intrusion detection is a primary mechanism to alert administrators to malicious activity. However, signature-based methods are not capable of detecting new or novel attacks. This research continues the development of a novel simulated, multiagent, flow-based intrusion detection system called MFIRE. Agents in the network are trained to recognize common attacks, and they share data with other agents to improve the overall effectiveness of the system. A Support Vector Machine (SVM) is the primary classifier with which agents determine an attack is occurring. Agents are prompted to move to different locations within the network to find better vantage points, and two methods for achieving this are developed. One uses a centralized reputation-based model, and the other uses a decentralized model optimized with stochastic search. The latter is tested for basic functionality. The reputation model is extensively tested in two configurations and results show that it is significantly superior to a system with non-moving agents. The resulting system, MFIRE-2, demonstrates exciting new network defense capabilities, and should be considered for implementation in future cyberwarfare applications
Securing cloud-hosted applications using active defense with rule-based adaptations
Security cloud-based applications is a dynamic problem since modern attacks are always evolving in their sophistication and disruption impact. Active defense is a state-of-the-art paradigm where proactive or reactive cybersecurity strategies are used to augment passive defense policies (e.g., firewalls). It involves using knowledge of the adversary to create of dynamic policy measures to secure resources and outsmart adversaries to make cyber-attacks difficult to execute. Using intelligent threat detection systems based on machine learning and active defense solutions implemented via cloud resource adaptations, we can slowdown attacks and derail attackers at an early stage so that they cannot proceed with their plots, while also increasing the probability that they will expose their presence or reveal their attack vectors. In this MS Thesis, we demonstrate the concept and benefits of active defense in securing cloud-based applications through rule-based adaptations on distributed resources. Specifically, we propose two novel active defense strategies to mitigate impact of security anomaly events within: (a) social virtual reality learning environment (VRLE), and (b) healthcare data sharing environment (HDSE). Our first strategy involves a "rule-based 3QS-adaptation framework" that performs risk and cost aware trade-off analysis to control cybersickness due to performance/security anomaly events during a VRLE session. VRLEs provide immersive experience to users with increased accessibility to remote learning, thus a breach of security in critical VRLE application domains (e.g., healthcare, military training, manufacturing) can disrupt functionality and induce cybersickness. Our framework implementation in a real-world social VRLE viz., vSocial monitors performance/security anomaly events in network data. In the event of an anomaly, the framework features rule-based adaptations that are triggered by using various decision metrics. Based on our experimental results, we demonstrate the effectiveness of our rulebased 3QS-adaptation framework in reducing cybersickness levels, while maintaining application functionality. Our second strategy involves a "defense by pretense methodology" that uses real-time attack detection and creates cyber deception for HDSE applications. Healthcare data consumers (e.g., clinicians and researchers) require access to massive, protected datasets, thus loss of assurance/auditability of critical data such as Electronic Health Records (EHR) can severely impact loss of privacy of patient's data and the reputation of the healthcare organizations. Our cyber deception utilizes elastic capacity provisioning via use of rule-based adaptation to provision Quarantine Virtual Machines (QVMs) that handle redirected attacker's traffic and increase threat intelligence collection. We evaluate our defense by pretense design by creating an experimental Amazon Web Services (AWS) testbed hosting a real-world OHDSI setup for protected health data analytics/sharing with electronic health record data (SynPUF) and publications data (CORD-19) related to COVID-19. Our experiment results show how we can successfully detect targeted attacks such as e.g., DDoS and create redirection of attack sources to QVMs.Includes bibliographical references
Command & Control: Understanding, Denying and Detecting - A review of malware C2 techniques, detection and defences
In this survey, we first briefly review the current state of cyber attacks,
highlighting significant recent changes in how and why such attacks are
performed. We then investigate the mechanics of malware command and control
(C2) establishment: we provide a comprehensive review of the techniques used by
attackers to set up such a channel and to hide its presence from the attacked
parties and the security tools they use. We then switch to the defensive side
of the problem, and review approaches that have been proposed for the detection
and disruption of C2 channels. We also map such techniques to widely-adopted
security controls, emphasizing gaps or limitations (and success stories) in
current best practices.Comment: Work commissioned by CPNI, available at c2report.org. 38 pages.
Listing abstract compressed from version appearing in repor
- …