205 research outputs found
Electric spring and smart load: technology, system-level impact and opportunities
Increasing use of renewable energy sources to combat climate change comes with the challenge of power imbalance and instability issues in emerging power grids. To mitigate power fluctuation arising from the intermittent nature of renewables, electric spring has been proposed as a fast demand-side management technology. Since its original conceptualization in 2011, many versions and variants of electric springs have emerged and industrial evaluations have begun. This paper provides an update of existing electric spring topologies, their associated control methodologies, and studies from the device level to the power system level. Future trends of electric springs in large-scale infrastructures are also addressed
WE ARE ALL GONNA DIE: HOW THE WEAK POINTS OF THE POWER GRID LEAVE THE UNITED STATES WITH AN UNACCEPTABLE RISK
Federal regulations aim to ensure grid reliability and harden it against outages; however, widespread outages continue. This thesis examines the spectrum of regulations to evaluate them. It outlines their structure, the regulations’ intent, and weighs them against evolving cyber and physical threats and natural disaster risks. Currently, the regulatory structure is incapable of providing uniform security. Federal standards protect only the transmission portion of the grid, leaving the distribution section vulnerable to attack due to varying regulations from state to state, or county to county. The regulations cannot adapt quickly enough to meet dynamic threats, rendering them less effective. Cyber threats can be so agile that protectors are unaware of vulnerabilities, and patching requirements are too lengthy, which increases the risk exposure. No current weather mitigation or standard is capable of protecting the grid despite regular natural disasters that cause power shutdowns. The thesis concludes that bridging these gaps requires not increasing protection standards, but redundancy. Redundancy, mirrored after the UK's infrastructure policy, is more likely to reduce failure risk through layered components and systems. Microgrids are proven effective in disasters to successfully deliver such redundancy and should be implemented across all critical infrastructure sectors.Civilian, Department of Homeland SecurityApproved for public release. Distribution is unlimited
Distributed voltage-driven demand response: flexibility, stability and value assessment
The need for operating reserve from energy storage, demand reduction (DR) etc. is expected
to increase signifcantly in future low-carbon Great Britain (GB) power system with high
penetration of non-synchronous renewable generation. One way to provide the reserve is to
use power electronic compensators (PECs) for point-of-load voltage control (PVC) to exploit
the voltage dependence of loads.
This thesis focuses on the quantifcation of DR capability from PVC in the domestic sector
using high-resolution stochastic demand models and generic distribution networks in GB.
The effectiveness of utilising PVC in contributing to frequency regulation is analysed and
demonstrated through time domain simulations. The techno-economic feasibility of such
technology is evaluated considering the investment cost of the PEC deployment as well as
the economic and environmental benefts of using PVC. The payback period varies between
0.3 to 6.7 years for different future scenarios considering a range of converter price. It is
demonstrated that PVC could effectively complement battery energy storage system towards enhanced frequency response provision in future GB power system.
For practical application of PVC for flexible demand and voltage regulation in future distribution networks/microgrids, it is important to investigate the overall small signal stability of
the system. In this thesis, the linearised state space model of a distribution network/isolated
microgrid with converter-interfaced distributed generators (CDGs) working in grid following
mode along with loads with PVC is developed. The stability performance is revealed through
both modal analysis and time domain simulations. It is shown that multiple loads with PVC for voltage regulation in distribution networks are not likely to threaten the small signal stability of the system. In the case of a microgrid, the introduction of PVC is shown to have marginal impact on the low frequency modes associated with the droop control of the CDGs. However, there is a trade-off when choosing the droop gain of the loads with PVC. Lower droop gains could ensure better frequency regulation in face of intermittent renewables but at the expense of a lower stability margin for an oscillation mode at a frequency slightly higher
than 20Hz.Open Acces
Distributed electric-spring-based smart thermal loads for overvoltage prevention in LV distributed network using dynamic consensus approach
Overvoltage arising from reverse power flow in low-voltage (LV) distribution network caused by surplus roof-top photovoltaic (PV) energy generation is a major challenge in the emerging smart grid. This paper reports a study on the use of distributed thermal Smart Loads (SLs) for overvoltage prevention along a LV feeder. The basic principle involves the combined use of electric springs (ESs) and storage-type electric water heaters (EWHs) as distributed smart loads. Through distributed control, these smart loads play the important roles of mitigating reverse power flow problems and maintaining local mains voltage within the specified tolerance. Detailed modeling of the combined ES and EWH including their practical electrical and thermal capacities and constraints is adopted and optional distributed energy storage system (ESS) is also considered in the evaluation. Based on the Sha Lo Bay residential LV network in Lantau Island, Hong Kong, these case studies confirm the feasibility of the proposed approach for overvoltage prevention. The proposed distributed SLs-plus-ESS method is proved to be a cost-effective and environmental friendly way for overvoltage prevention in LV distributed network with high PV penetration
A Review of Active Management for Distribution Networks: Current Status and Future Development Trends
Driven by smart distribution technologies, by the widespread use of distributed generation sources, and by the injection of new loads, such as electric vehicles, distribution networks are evolving from passive to active. The integration of distributed generation, including renewable distributed generation changes the power flow of a distribution network from unidirectional to bi-directional. The adoption of electric vehicles makes the management of distribution networks even more challenging. As such, an active network management has to be fulfilled by taking advantage of the emerging techniques of control, monitoring, protection, and communication to assist distribution network operators in an optimal manner. This article presents a short review of recent advancements and identifies emerging technologies and future development trends to support active management of distribution networks
Developing vanadium redox flow technology on a 9-kW 26-kWh industrial scale test facility: Design review and early experiments
Redox Flow Batteries (RFBs) have a strong potential for future stationary storage, in view of the rapid expansion of renewable energy sources and smart grids. Their development and future success largely depend on the research on new materials, namely electrolytic solutions, membranes and electrodes, which is typically conduced on small single cells. A vast literature on these topics already exists. However, also the technological development plays a fundamental role in view of the successful application of RFBs in large plants. Despite that, very little research is reported in literature on the technology of large RFB systems. This paper presents the design, construction and early operation of a vanadium redox flow battery test facility of industrial size, dubbed IS-VRFB, where such technologies are developed and tested. In early experiments a peak power of 8.9 kW has been achieved with a stack specific power of 77Wkg−1. The maximum tested current density of 635 mA cm−2 has been reached with a cell voltage of 0.5 V, indicating that higher values can be obtained. The test facility is ready to be complemented with advanced diagnostic devices, including multichannel electrochemical impedance spectroscopy for studying aging and discrepancies in the cell behaviors
Extending the Operating Range of Electric Spring using Back-To-Back Converter: Hardware Implementation and Control
This paper presents the first hardware implementation and control of an electric spring based on a back-to-back converter configuration. Because of its ability to provide both active and reactive power compensation, this back-to-back electric spring (ES-B2B) can substantially extend the operating range of the original version of the electric spring (ES-1) and provide enhanced voltage support and suppression functions. The hardware system and control of the ES-B2B have been successfully developed and tested. The experimental results have confirmed the effectiveness of the ES-B2B in supporting and suppressing the mains voltage. Particularly, the voltage suppression ability of the ES-B2B is superior over that of ES-1. The use of ES-B2B in a simulation study of a weak power grid has also been conducted. The ES-B2B has been found to be highly effective in mitigating voltage fluctuation caused by intermittent renewable power generation
Evolution of microgrids with converter-interfaced generations: Challenges and opportunities
© 2019 Elsevier Ltd Although microgrids facilitate the increased penetration of distributed generations (DGs) and improve the security of power supplies, they have some issues that need to be better understood and addressed before realising the full potential of microgrids. This paper presents a comprehensive list of challenges and opportunities supported by a literature review on the evolution of converter-based microgrids. The discussion in this paper presented with a view to establishing microgrids as distinct from the existing distribution systems. This is accomplished by, firstly, describing the challenges and benefits of using DG units in a distribution network and then those of microgrid ones. Also, the definitions, classifications and characteristics of microgrids are summarised to provide a sound basis for novice researchers to undertake ongoing research on microgrids
- …