Minimum Power Configuration in Wireless Sensor Networks

This paper proposes the minimum power configuration (MPC) approach to energy conservation in wireless sensor networks. In sharp contrast to earlier research that treats topology control, power-aware routing, and sleep management in isolation, MPC integrates them as a joint optimization prob-lem in which the power configurationof a network consists of a set of active nodes and the transmission powers of the nodes. We show through analysis that the minimum power configu-ration of a network is inherently dependent on the data rates of sources. We propose several approximation algorithms with provable performance bounds compared to the optimal solu-tion, and a practical Minimum Power Configuration Protocol (MPCP) that can dynamically (re)configure a network to mini-mize the energy consumption based on current data rates. Sim-ulations based on realistic radio models of the Mica2 motes show that MPCP can conserve significantly more energy than existing minimum power routing and topology control protocols

Minimum Power Configuration for Wireless Communication in Sensor Networks

This paper proposes the Minimum Power Configuration (MPC) approach to power management in wireless sensor networks. In contrast to earlier research that treats different radio states (transmission/reception/idle) in isolation, MPC integrates them in a joint optimization problem that depends on both the set of active nodes and the transmission power. We propose four approximation algorithms with provable performance bounds and two practical routing protocols. Simulations based on realistic radio models show that the MPC approach can conserve more energy than existing minimum power routing and topology control protocols. Furthermore, it can flexibly adapt to network workload and radio platforms

QoS Provision for Wireless Sensor Networks

Wireless sensor network is a fast growing area of research, receiving attention not only within the computer science and electrical engineering communities, but also in relation to network optimization, scheduling, risk and reliability analysis within industrial and system engineering. The availability of micro-sensors and low-power wireless communications will enable the deployment of densely distributed sensor/actuator networks. And an integration of such system plays critical roles in many facets of human life ranging from intelligent assistants in hospitals to manufacturing process, to rescue agents in large scale disaster response, to sensor networks tracking environment phenomena, and others. The sensor nodes will perform significant signal processing, computation, and network self-configuration to achieve scalable, secure, robust and long-lived networks. More specifically, sensor nodes will do local processing to reduce energy costs, and key exchanges to ensure robust communications. These requirements pose interesting challenges for networking research. The most important technical challenge arises from the development of an integrated system which is 1)energy efficient because the system must be long-lived and operate without manual intervention, 2)reliable for data communication and robust to attackers because information security and system robustness are important in sensitive applications, such as military. Based on the above challenges, this dissertation provides Quality of Service (QoS) implementation and evaluation for the wireless sensor networks. It includes the following 3 modules, 1) energy-efficient routing, 2) energy-efficient coverage, 3). communication security. Energy-efficient routing combines the features of minimum energy consumption routing protocols with minimum computational cost routing protocols. Energy-efficient coverage provides on-demand sensing and measurement. Information security needs a security key exchange scheme to ensure reliable and robust communication links. QoS evaluation metrics and results are presented based on the above requirements

Atomic-SDN: Is Synchronous Flooding the Solution to Software-Defined Networking in IoT?

The adoption of Software Defined Networking (SDN) within traditional networks has provided operators the ability to manage diverse resources and easily reconfigure networks as requirements change. Recent research has extended this concept to IEEE 802.15.4 low-power wireless networks, which form a key component of the Internet of Things (IoT). However, the multiple traffic patterns necessary for SDN control makes it difficult to apply this approach to these highly challenging environments. This paper presents Atomic-SDN, a highly reliable and low-latency solution for SDN in low-power wireless. Atomic-SDN introduces a novel Synchronous Flooding (SF) architecture capable of dynamically configuring SF protocols to satisfy complex SDN control requirements, and draws from the authors' previous experiences in the IEEE EWSN Dependability Competition: where SF solutions have consistently outperformed other entries. Using this approach, Atomic-SDN presents considerable performance gains over other SDN implementations for low-power IoT networks. We evaluate Atomic-SDN through simulation and experimentation, and show how utilizing SF techniques provides latency and reliability guarantees to SDN control operations as the local mesh scales. We compare Atomic-SDN against other SDN implementations based on the IEEE 802.15.4 network stack, and establish that Atomic-SDN improves SDN control by orders-of-magnitude across latency, reliability, and energy-efficiency metrics

Understanding Link Dynamics in Wireless Sensor Networks with Dynamically Steerable Directional Antennas

Abstract. By radiating the power in the direction of choice, electronicallyswitched directional (ESD) antennas can reduce network contention and avoid packet loss. There exists some ESD antennas for wireless sensor networks, but so far researchers have mainly evaluated their directionality. There are no studies regarding the link dynamics of ESD antennas, in particular not for indoor deployments and other scenarios where nodes are not necessarily in line of sight. Our long-term experiments confirm that previous findings that have demonstrated the dependence of angleof-arrival on channel frequency also hold for directional transmissions with ESD antennas. This is important for the design of protocols for wireless sensor networks with ESD antennas: the best antenna direction, i.e., the direction that leads to the highest packet reception rate and signal strength at the receiver, is not stable but varies over time and with the selected IEEE 802.15.4 channel. As this requires protocols to incorporate some form of adaptation, we present an intentionally simple and yet efficient mechanism for selecting the best antenna direction at run-time with an energy overhead below 2 % compared to standard omni-directional transmissions.

Optimizing the beacon exchange rate for proactive autonomic configuration in ubiquitous MANETs

Proactive self-configuration is indispensable for MANETs like ubiquitous sensor networks (USNs), as component devices of the network are usually exposed to natural or man-made disasters due to the hostile deployment and ad hoc nature of the USNs. Network state beacons (NSBs) are exchanged among the key nodes of the network for crucial and effective monitoring of the network for steady state operation. The rate of beacon exchange (F/sub E/) and its contents, define the time and nature of the proactive action. Therefore it is very important to optimize these parameters to tune the functional response of the USN. This paper presents a comprehensive model for monitoring and proactively reconfiguring the network by optimizing the F/sub E/. The results confirm the improved throughput while maintaining QoS over longer periods of network operation

Distributed and Load-Adaptive Self Configuration in Sensor Networks

Proactive self-configuration is crucial for MANETs such as sensor networks, as these are often deployed in hostile environments and are ad hoc in nature. The dynamic architecture of the network is monitored by exchanging so-called Network State Beacons (NSBs) between key network nodes. The Beacon Exchange rate and the network state define both the time and nature of a proactive action to combat network performance degradation at a time of crisis. It is thus essential to optimize these parameters for the dynamic load profile of the network. This paper presents a novel distributed adaptive optimization Beacon Exchange selection model which considers distributed network load for energy efficient monitoring and proactive reconfiguration of the network. The results show an improvement of 70% in throughput, while maintaining a guaranteed quality-of- service for a small control-traffic overhead

Implementation of a herd management system with wireless sensor networks

This paper investigates an adaptation of Wireless Sensor Networks (WSNs) to cattle monitoring applications. The proposed solution facilitates the requirement for continuously assessing the condition of individual animals, aggregating and reporting this data to the farm manager. There are several existing approaches to achieving animal monitoring, ranging from using a store and forward mechanism to employing GSM-based techniques; these approaches only provide sporadic information and introduce a considerable cost in staffing and physical hardware. The core of this study is to overcome the aforementioned drawbacks by using alternative cheap, low power consumption sensor nodes capable of providing real-time communication at a reasonable hardware cost. In this paper, both the hardware and software has been designed to provide a solution which can obtain real-time data from dairy cattle whilst conforming to the limitations associated with WSNs implementations