992 research outputs found
MScMS-II: an innovative IR-based indoor coordinate measuring system for large-scale metrology applications
According to the current great interest concerning large-scale metrology applications in many different fields of manufacturing industry, technologies and techniques for dimensional measurement have recently shown a substantial improvement. Ease-of-use, logistic and economic issues, as well as metrological performance are assuming a more and more important role among system requirements. This paper describes the architecture and the working principles of a novel infrared (IR) optical-based system, designed to perform low-cost and easy indoor coordinate measurements of large-size objects. The system consists of a distributed network-based layout, whose modularity allows fitting differently sized and shaped working volumes by adequately increasing the number of sensing units. Differently from existing spatially distributed metrological instruments, the remote sensor devices are intended to provide embedded data elaboration capabilities, in order to share the overall computational load. The overall system functionalities, including distributed layout configuration, network self-calibration, 3D point localization, and measurement data elaboration, are discussed. A preliminary metrological characterization of system performance, based on experimental testing, is also presente
Power meter for Highly-Distorted Three-Phase Systems
This paper describes a low-cost, three-phase power meter, which is based on a fast, specially designed acquisition board coupled to a PC via the PC parallel/printer port or by means of an AT card. The power associated with the fundamental and first harmonics is computed by software that operates in the time domain and employs a sample-weighting procedure that makes the uncertainty related to the asynchronous sampling negligible. The low-cost acquisition board features two 8-bit 1 MHz converters and a local RAM, which decouples the PC clock from the measurement requirements. Hall effect transducers are used for the current channels and fast differential amplifiers for the voltage channels. The fast sampling frequency allows simple antialiasing filters to be employed. Digital filtering is used to reduce the sample number while increasing the resolution. The power uncertainty provided by this arrangement is less then 0.1 % with 2.5 measurements per second when a low-cost 486DX33-based PC is use
Demodulation of Spatial Carrier Images: Performance Analysis of Several Algorithms Using a Single Image
http://link.springer.com/article/10.1007%2Fs11340-013-9741-6#Optical full-field techniques have a great importance in modern experimental mechanics. Even if they are reasonably spread among the university laboratories, their diffusion in industrial companies remains very narrow for several reasons, especially a lack of metrological performance assessment. A full-field measurement can be characterized by its resolution, bias, measuring range, and by a specific quantity, the spatial resolution. The present paper proposes an original procedure to estimate in one single step the resolution, bias and spatial resolution for a given operator (decoding algorithms such as image correlation, low-pass filters, derivation tools ...). This procedure is based on the construction of a particular multi-frequential field, and a Bode diagram representation of the results. This analysis is applied to various phase demodulating algorithms suited to estimate in-plane displacements.GDR CNRS 2519 âMesures de Champs et Identification en MĂ©canique des Solide
Metrological characterization of a vision-based system for relative pose measurements with fiducial marker mapping for spacecrafts
An improved approach for the measurement of the relative pose between a target and a chaser spacecraft is presented. The selected method is based on a single camera, which can be mounted on the chaser, and a plurality of fiducial markers, which can be mounted on the external surface of the target. The measurement procedure comprises of a closed-form solution of the Perspective from n Points (PnP) problem, a RANdom SAmple Consensus (RANSAC) procedure, a non-linear local optimization and a global Bundle Adjustment refinement of the marker map and relative poses. A metrological characterization of the measurement system is performed using an experimental set-up that can impose rotations combined with a linear translation and can measure them. The rotation and position measurement errors are calculated with reference instrumentations and their uncertainties are evaluated by the Monte Carlo method. The experimental laboratory tests highlight the significant improvements provided by the Bundle Adjustment refinement. Moreover, a set of possible influencing physical parameters are defined and their correlations with the rotation and position errors and uncertainties are analyzed. Using both numerical quantitative correlation coefficients and qualitative graphical representations, the most significant parameters for the final measurement errors and uncertainties are determined. The obtained results give clear indications and advice for the design of future measurement systems and for the selection of the marker positioning on a satellite surface
Determining the extrinsic parameters of a network of Large-Volume Metrology sensors of different types
Large-Volume Metrology (LVM) instruments â such as laser trackers, photogrammetric systems, rotary-laser automatic theodolites, etc. â generally include several sensors, which measure the distances and/or angles subtended by some targets. This measurements, combined with the spatial position/orientation of sensors (i.e., the so-called extrinsic parameters), can be used to locate targets in the measurement volume. Extrinsic parameters of sensors are generally determined through dedicated sensor calibration methods, which are based on repeated measurements of specific artefacts.
The combined use of multiple LVM instruments enables exploitation of available equipment but may require multiple instrument-dedicated sensor calibrations, which inevitably increase set-up time/cost.
This document presents a novel calibration method â called global calibration â which allows the extrinsic parameters of all sensors to be determined in a single process. The proposed method uses a special artefact â i.e., a hand-held probe with assorted types of targets and inertial sensors â and includes a data-acquisition stage, in which the probe is repositioned in different areas of the measurement volume, followed by a data-processing stage, in which an ad hoc mathematical/statistical model is used to determine the extrinsic parameters of sensors. Additionally, the proposed method includes the formulation of a system of linearized equations, which are weighed considering the uncertainty of input variables
Integration of Absolute Orientation Measurements in the KinectFusion Reconstruction pipeline
In this paper, we show how absolute orientation measurements provided by
low-cost but high-fidelity IMU sensors can be integrated into the KinectFusion
pipeline. We show that integration improves both runtime, robustness and
quality of the 3D reconstruction. In particular, we use this orientation data
to seed and regularize the ICP registration technique. We also present a
technique to filter the pairs of 3D matched points based on the distribution of
their distances. This filter is implemented efficiently on the GPU. Estimating
the distribution of the distances helps control the number of iterations
necessary for the convergence of the ICP algorithm. Finally, we show
experimental results that highlight improvements in robustness, a speed-up of
almost 12%, and a gain in tracking quality of 53% for the ATE metric on the
Freiburg benchmark.Comment: CVPR Workshop on Visual Odometry and Computer Vision Applications
Based on Location Clues 201
Definition and validation of approaches special for OS&H in Research Universities, from Risk Assessment to Quality Management in the frame of PoliTo-UniTo Guideline
L'abstract Ăš presente nell'allegato / the abstract is in the attachmen
Digital design of medical replicas via desktop systems: shape evaluation of colon parts
In this paper, we aim at providing results concerning the application of desktop systems for rapid prototyping of medical replicas
that involve complex shapes, as, for example, folds of a colon. Medical replicas may assist preoperative planning or tutoring in
surgery to better understand the interaction among pathology and organs. Major goals of the paper concern with guiding the
digital design workflow of the replicas and understanding their final performance, according to the requirements asked by the
medics (shape accuracy, capability of seeing both inner and outer details, and support and possible interfacing with other organs).
In particular, after the analysis of these requirements, we apply digital design for colon replicas, adopting two desktop systems. ,e
experimental results confirm that the proposed preprocessing strategy is able to conduct to the manufacturing of colon replicas
divided in self-supporting segments, minimizing the supports during printing. ,is allows also to reach an acceptable level of final
quality, according to the request of having a 3D presurgery overview of the problems. ,ese replicas are compared through reverse
engineering acquisitions made by a structured-light system, to assess the achieved shape and dimensional accuracy. Final results
demonstrate that low-cost desktop systems, coupled with proper strategy of preprocessing, may have shape deviation in the range
of ±1 mm, good for physical manipulations during medical diagnosis and explanation
- âŠ