Force-Guiding Particle Chains for Shape-Shifting Displays

We present design and implementation of a chain of particles that can be programmed to fold the chain into a given curve. The particles guide an external force to fold, therefore the particles are simple and amenable for miniaturization. A chain can consist of a large number of such particles. Using multiple of these chains, a shape-shifting display can be constructed that folds its initially flat surface to approximate a given 3D shape that can be touched and modified by users, for example, enabling architects to interactively view, touch, and modify a 3D model of a building.Comment: 6 pages, 5 figure, submitted to IROS 201

A Review of Cooperative Actuator and Sensor Systems Based on Dielectric Elastomer Transducers

This paper presents an overview of cooperative actuator and sensor systems based on dielectric elastomer (DE) transducers. A DE consists of a flexible capacitor made of a thin layer of soft dielectric material (e.g., acrylic, silicone) surrounded with a compliant electrode, which is able to work as an actuator or as a sensor. Features such as large deformation, high compliance, flexibility, energy efficiency, lightweight, self-sensing, and low cost make DE technology particularly attractive for the realization of mechatronic systems that are capable of performance not achievable with alternative technologies. If several DEs are arranged in an array-like configuration, new concepts of cooperative actuator/sensor systems can be enabled, in which novel applications and features are made possible by the synergistic operations among nearby elements. The goal of this paper is to review recent advances in the area of cooperative DE systems technology. After summarizing the basic operating principle of DE transducers, several applications of cooperative DE actuators and sensors from the recent literature are discussed, ranging from haptic interfaces and bio-inspired robots to micro-scale devices and tactile sensors. Finally, challenges and perspectives for the future development of cooperative DE systems are discussed

Toward a 2D Modular and Self-Reconfigurable Robot for Conveying Microparts.

International audienceThis paper describes the design, prototyping and control of a 2D modular and self-reconfigurable robot for conveying microparts. The elementary block is designed to have a package dimension under 1cm3 and will include the actuators, the electronics and the micro-controller. Electropermanent (EP) magnets are used for both the linkage and the traveling system to avoid any power consumption during the linkage. Some prototype blocks have been realized and show a well working of the motion and a sufficient holding force. The paper presents also an algorithm, common to all blocks units, allowing to reconfigure a set blocks from a spatial configuration to another one. This algorithm is implemented in a simulator software showing in real-time the reconfiguration of the robot

Design and Fabrication of Origami Elements for use in a Folding Robot Structure

The aim of the research is to investigate the methodology of the design and fabrication of folding robots that depend on the origami structures. The use of origami structures as a foundation to build reconfigurable and morphing robots that could assist in search and rescue (SAR) tasks are investigated. The design of the origami folding structures divided into three stages: consideration of the geometry of the origami structure, the hinge design, and the actuation system. The result of investigating three origami structures shows the ability to use the unit cell of the origami ball structure as a self-folding element. Furthermore, the novel type of origami structure for manipulation was created according to this result. This novel structure was designed to be a soft manipulation robot arm. Two approaches are used to design and fabricate flexure hinge. The first is by using a 3D printed multi-material technique. By this technique, the hinge printed using soft and solid material at the same time, which is Tango plus flx930 for soft material and Vero for solid material. The soft material act as a flexure hinge. Therefore, three tests were operated for it to calculate the tensile force, fatigue limit, and the required bend force. The second approach is by using acrylic and Kapton materials. Two types of actuation systems were studied: the external actuation system and embedded actuation system. The external actuation system was used for the Origami structure for manipulation, while the embedded actuation system was used for the self-folding structure. The shape memory alloy wires in torsion (TSW) and bending (BSW) was used in an embedded actuation system. A unit cell of origami ball was fabricated as a self-folding element by using three approaches: manually, acrylic, and Kapton and 3D printing. It is actuated by using shape memory alloy wire. Furthermore, an origami structure for manipulation was fabricated and actuated using an external actuation system. This novel type of origami structure provided an excellent bend motion ability

Actuation Technologies for Soft Robot Grippers and Manipulators: A Review

Purpose of Review The new paradigm of soft robotics has been widely developed in the international robotics community. These robots being soft can be used in applications where delicate yet effective interaction is necessary. Soft grippers and manipulators are important, and their actuation is a fundamental area of study. The main purpose of this work is to provide readers with fast references to actuation technologies for soft robotic grippers in relation to their intended application. Recent Findings The authors have surveyed recent findings on actuation technologies for soft grippers. They presented six major kinds of technologies which are either used independently for actuation or in combination, e.g., pneumatic actuation combined with electro-adhesion, for certain applications. Summary A review on the latest actuation technologies for soft grippers and manipulators is presented. Readers will get a guide on the various methods of technology utilization based on the application

Physical connections and cooperation in swarm robotics

We describe a new multi-robot system, named SWARM-BOTS, that exploits physical inter-connections to solve tasks that are impossible for a single robot. This is for instance the case of passing large gaps or high steps in all-terrain conditions. In order to achieve this type of autonomous collective operations, the design of the type of connection, as well as its sensors and actuators, plays a key role. This paper presents the choices made in the SWARM-BOTS project and the know-how collected until now. The requirements for autonomous operation and mobility of each robots have led to the development of a connectivity very different those found in selfrecon gurable robots. Some of the solutions employed for this problem are inspired upon physical connectivity of social insects. We also illustrate with two experiments how sensors and actuators allow autonomous operation in connection, release as well as passive and active exploitation of inter-robot degrees of freedom (DOF)

Adaptive Multi-Functional Space Systems for Micro-Climate Control

This report summarizes the work done during the Adaptive Multifunctional Systems for Microclimate Control Study held at the Caltech Keck Institute for Space Studies (KISS) in 2014-2015. Dr. Marco Quadrelli (JPL), Dr. James Lyke (AFRL), and Prof. Sergio Pellegrino (Caltech) led the Study, which included two workshops: the first in May of 2014, and another in February of 2015. The Final Report of the Study presented here describes the potential relevance of adaptive multifunctional systems for microclimate control to the missions outlined in the 2010 NRC Decadal Survey. The objective of the Study was to adapt the most recent advances in multifunctional reconfigurable and adaptive structures to enable a microenvironment control to support space exploration in extreme environments (EE). The technical goal was to identify the most efficient materials, architectures, structures and means of deployment/reconfiguration, system autonomy and energy management solutions needed to optimally project/generate a micro-environment around space assets. For example, compact packed thin-layer reflective structures unfolding to large areas can reflect solar energy, warming and illuminating assets such as exploration rovers on Mars or human habitats on the Moon. This novel solution is called an energy-projecting multifunctional system (EPMFS), which are composed of Multifunctional Systems (MFS) and Energy-Projecting Systems (EPS)

Electropermanent magnetic connectors and actuators : devices and their application in programmable matter

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 199-206).Programmable matter is a digital material having computation, sensing, and actuation capabilities as continuous properties active over its whole extent. To make programmable matter economical to fabricate, we want to use electromagnetic direct drive, rather than clockwork, to actuate the particles. Previous attempts to fabricate small scale (below one centimeter) robotic systems with electromagnetic direct-drive have typically run into problems with insufficient force or torque, excessive power consumption and heat generation (for magnetic-drive systems), or high-voltage requirements, humidity sensitivity, and air breakdown. (for electrostatic-drive systems) The electropermanent magnet is a solid-state device whose external magnetic flux can be stably switched on and off by a discrete electrical pulse. Electropermanent magnets can provide low-power connection and actuation for programmable matter and other small-scale robotic systems. The first chapter covers the electropermanent magnet, its physics, scaling, fabrication, and our experimental device performance data. The second introduces the idea of electropermanent actuators, covers their fundamental limits and scaling, and shows prototype devices and performance measurements. The third chapter describes the smart pebbles system, which consists of 12-mm cubes that can form shapes by stochastic self-assembly and self-disassembly. The fourth chapter describes the millibot, a continuous chain of programmable matter which forms shapes by folding.by Ara Nerses Knaian.Ph.D

Bi-Directional Origami-Inspired SMA Folding Microactuator

We present the design, fabrication, and characterization of single and antagonistic SMA microactuators allowing for uni- and bi-directional self-folding of origami-inspired devices, respectively. Test devices consist of two triangular tiles that are interconnected by double-beam-shaped SMA microactuators fabricated from thin SMA foils of 20 µm thickness with memory shapes set to a 180° folding angle. Bi-directional self-folding is achieved by combining two counteracting SMA microactuators. We present a macromodel to describe the engineering stress–strain characteristics of the SMA foil and to perform FEM simulations on the characteristics of self-folding and the corresponding local evolution of phase transformation. Experiments on single-SMA microactuators demonstrate the uni-directional self-folding and tunability of bending angles up to 180°. The finite element simulations qualitatively describe the main features of the observed torque-folding angle characteristics and provide further insights into the angular dependence of the local profiles of the stress and martensite phase fraction. The first antagonistic SMA microactuators reveal bi-directional self-folding in the range of −44° to +40°, which remains well below the predicted limit of ±100°