Improving robotic machining accuracy through experimental error investigation and modular compensation

Machining using industrial robots is currently limited to applications with low geometrical accuracies and soft materials. This paper analyzes the sources of errors in robotic machining and characterizes them in amplitude and frequency. Experiments under different conditions represent a typical set of industrial applications and allow a qualified evaluation. Based on this analysis, a modular approach is proposed to overcome these obstacles, applied both during program generation (offline) and execution (online). Predictive offline compensation of machining errors is achieved by means of an innovative programming system, based on kinematic and dynamic robot models. Real-time adaptive machining error compensation is also provided by sensing the real robot positions with an innovative tracking system and corrective feedback to both the robot and an additional high-dynamic compensation mechanism on piezo-actuator basis

Interfaces Expanding Boundaries of Architectural Design Education withIndustrial Robots

Throughout an extensive period of time, advanced mechanical tools such as robotic arms have been a common prospect in many production industries. Today, and as the potentials in digital design and fabrication technologies are seen to enhance complex tridimensional construction processes, robots are rapidly being integrated within the architectural education curriculum. In a relatively short amount of time, many architectural faculties around the globe have set up experimental digital fabrication laboratories with 3D printers, CNC machines, and robotic arms. This paper will argue the use of robots in education beyond the opportunities provided by the already traditional automated modes of fabrication, trying to appreciate design and fabrication methodologies as open interfaces that challenge students with problem-solving, advanced geometry, and programming

DIGITAL TOOLS AND ROBOTICS IN ARCHITECTURE: ENVISIONING THE FUTURE INEDUCATION AND PRACTICE

In a world advancing at a vertiginous speed, technology is directly affecting almost every single aspect of contemporary human life. It is therefore crucial nowadays for both the professional and the educational sectors to constantly update themselves with the latest trends in their fields. Once students graduate, they should first be familiar with the needs of the highly competitive market, and at the same time to be prepared for challenges facing the practice in order to improve it and stand at a higher level from competitors. For such reason, students need to be aware that high tech tools are vital in defining the way professionals work and advance. In this sense, the educational field shall play a leading role to conscious students about such line of work that is contaminating all professional areas, including architecture. This paper therefore will focus on the ideas of how to deal with the latest trends in digital tools and robotics at the academic level in order to awake and motivate architectural students to rationally use them as a helping set of tools that will have a direct impact on the way they work. Exploration at the level of freedom that such means can offer to enhance students at the creativity level will be directly analyzed throughout a workshop conducted, based on digital tools and robotics in architecture, and linked to the intentions related to architectural design challenges by involving students in site visits to projects where cutting edge work is being applied such as the Sagrada Família, one of Antoni Gaudí’s masterpieces. Conclusions will be based on the principles helping students dealing with advanced tools to transform their intentions from digital to analogue means as part of a controlled system intended to innovate design and construction principles

Investigation on the International State of the Art of Micro Production Technology

The study “microPRO” dealing with the international state of the art of micro production technology was conducted by the above named Institutes. The objective of this study was to determine the worldwide state-of-the-art technology and research in micro production technology by means of scientific investigations and technical discussions with the technology leaders and, based on this, to identify the required research and development as well as the future potentials of these technologies in view of the market-overlapping economic utilization of miniaturized products

Propuesta de inclusión de esfuerzos en el control de un brazo robot para asegurar el cumplimiento de la rugosidad superficial durante operaciones de lijado en diferentes materiales

Tesis por compendio[ES] El mecanizado con brazos robots ha sido estudiado aproximadamente desde los años 90, durante este tiempo se han llevado a cabo importantes avances y descubrimientos en cuanto a su campo de aplicación. En general, los robots manipuladores tienen muchos beneficios y ventajas al ser usados en operaciones de mecanizado, tales como, flexibilidad, gran área de trabajo y facilidad de programación, entre otras, frente a las Máquinas Herramientas de Control numérico (MHCN) que necesitan de una gran inversión para trabajar piezas muy grandes o incrementar sus grados de libertad. Como desventajas, frente a las MHCN, los brazos robóticos poseen menor rigidez, lo que combinado con las altas fuerzas producidas en los procesos de mecanizado hace que aparezcan errores de precisión, desviaciones en las trayectorias, vibraciones y, por consiguiente, una mala calidad en las piezas fabricadas. Entre los brazos robots, los brazos colaborativos están en auge debido a su programación intuitiva y a sus medidas de seguridad, que les permiten trabajar en el mismo espacio que los operadores sin que estos corran riesgos. Como desventaja añadida de los robots colaborativos se encuentra la mayor flexibilidad que estos tienen en sus articulaciones, debido a que incluyen reductores del tipo Harmonic drive. El uso de un control de fuerza en procesos de mecanizado con brazos robots permite controlar y corregir en tiempo real las desviaciones generadas por la flexibilidad en las articulaciones del robot. Utilizar este método de control es beneficioso en cualquier brazo robot; sin embargo, el control interno que incluyen los robots colaborativos presenta ventajas que permiten que el control de fuerza pueda ser aplicado de una manera más eficiente. En el presente trabajo se desarrolla una propuesta real para la inclusión del control de esfuerzos en el brazo robot, así como también, se evalúa y cuantifica la capacidad de los robots industriales y colaborativos en tareas de mecanizado. La propuesta plantea cómo mejorar la utilización de un control de fuerza por bucle interior/exterior aplicado en un brazo colaborativo cuando se desconocen los pares reales de los motores del robot, así como otros parámetros internos que los fabricantes no dan a conocer. Este bucle de control interior/exterior ha sido utilizado en aplicaciones de pulido y lijado sobre diferentes materiales. Los resultados indican que el robot colaborativo es factible para realizar tales operaciones de mecanizado. Sus mejores resultados se obtienen cuando se utiliza un bucle de control interno por velocidad y un bucle de control externo de fuerza con algoritmos, Proporcional-Integral-Derivativo o Proporcional más Pre-Alimentación de la Fuerza.[CA] El mecanitzat amb braços robots ha estat estudiat aproximadament des dels anys 90, durant aquest temps s'han dut a terme importants avanços i descobriments en el que fa al seu camp d'aplicació. En general, els robots manipuladors tenen molts beneficis i avantatges al ser usats en operacions de mecanitzat, com ara, flexibilitat, gran àrea de treball i facilitat de programació, entre d'altres, davant de Màquines Eines de Control Numèric (MECN) que necessiten d'una gran inversió per treballar peces molt grans o incrementar els seus graus de llibertat. Com a desavantatges, enfront de les MECN, els braços robòtics posseeixen menor rigidesa, el que combinat amb les altes forces produïdes en els processos de mecanitzat fa que apareguin errors de precisió, desviacions en les trajectòries, vibracions i, per tant, una mala qualitat en les peces fabricades. Entre els braços robots, els braços col·laboratius estan en auge a causa de la seva programació intuïtiva i a les seves mesures de seguretat, que els permeten treballar en el mateix espai que els operadors sense que aquests corrin riscos. Com desavantatge afegida als robots col·laboratius es troba la major flexibilitat que aquests tenen en les seves articulacions, a causa de que inclouen reductors del tipus Harmonic drive. L'ús d'un control de força en processos de mecanitzat amb braços robots permet controlar, i corregir, en temps real les desviacions generades per la flexibilitat en les articulacions del robot. Utilitzar aquest mètode de control és beneficiós en qualsevol braç robot, però, el control intern que inclouen els robots col·laboratius presenta avantatges que permeten que el control de força es puga aplicar d'una manera més eficient. En el present treball es desenvolupa una proposta real per a la inclusió del control d'esforços en el braç robot, així com s'avalua i quantifica la capacitat dels robots industrials i col·laboratius en tasques de mecanitzat. La proposta planteja com millorar la utilització d'un control de força per bucle interior/exterior aplicat en un braç col·laboratiu, quan es desconeixen els parells reals dels motors del robot, així com altres paràmetres interns que els fabricants no donen a conèixer. Aquest bucle de control interior/exterior ha estat utilitzat en aplicacions de polit sobre diferents materials. Els resultats indiquen que el robot col·laboratiu és factible de realitzar aquestes operacions de mecanitzat. Els seus millors resultats s'obtenen quan s'utilitza un bucle de control intern per velocitat i un bucle de control extern de força amb els algoritmes Proporcional-Integral-Derivatiu o Proporcional més Pre-alimentació de la Força.[EN] Machining with robot arms has been studied approximately since the 90s; during this time, important advances and discoveries have been made in its field of application. In general, manipulative robots have many benefits and advantages when they are used in machining operations, such as flexibility, large work area, and ease of programming, among others, compared to Numerical Control Machine Tools (NCMT) that need a great investment to work very large pieces or increase their degrees of freedom. As for disadvantages, compared to NCMT, robotic arms have lower rigidity, which, combined with the high forces produced in machining processes, causes precision errors, path deviations, vibrations, and, consequently, poor quality in the manufactured parts. Among robot arms, collaborative arms are on the rise due to their intuitive programming and safety measures, which allow them to work in the same space without risk for the operators. An added disadvantage of collaborative robots is their flexibility in their joints because they include Harmonic drive type reducers. The use of force control in machining processes with robot arms makes possible to control and correct, in real-time, the deviations generated by the flexibility in the robot's joints. The use of this control method is beneficial for any robot arm. However, the internal control included in collaborative robots has advantages that allow the force control to be applied more efficiently. In this work, a real proposal is developed to include effort control in the robot arm. The capacity of industrial and collaborative robots in machining tasks is evaluated and quantified. The proposal recommends how to improve the use of an inner/outer force control loop applied in a collaborative arm, when the real torques of the robot's motors are unknown and other internal parameters that manufacturers do not disclose. This inner/outer control loop has been used in polishing and sanding applications on different materials. The results indicate that the collaborative robot is feasible to perform such machining operations. Best results are obtained using an internal velocity control loop and external force control loop with Proportional-Integral-Derivative or Proportional plus Feed Forward.The authors are grateful for the financial support of the Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE). This work was funded by the CONICYT PFCHA/DOCTORADO BECAS CHILE/2017 – 72180157.Pérez Ubeda, RA. (2022). Propuesta de inclusión de esfuerzos en el control de un brazo robot para asegurar el cumplimiento de la rugosidad superficial durante operaciones de lijado en diferentes materiales [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/182000TESISCompendi

Robots in machining

Robotic machining centers offer diverse advantages: large operation reach with large reorientation capability, and a low cost, to name a few. Many challenges have slowed down the adoption or sometimes inhibited the use of robots for machining tasks. This paper deals with the current usage and status of robots in machining, as well as the necessary modelling and identification for enabling optimization, process planning and process control. Recent research addressing deburring, milling, incremental forming, polishing or thin wall machining is presented. We discuss various processes in which robots need to deal with significant process forces while fulfilling their machining task

The application of industrial robots in concrete formwork fabrication

Hlavní cíl této práce je popsání procesů navrhování, modelovaní, výroby a opracovaní bednění pro tvarově složité betonové prvky při aplikaci několika sofistikovaných softwarů a technologií. Také tato práce obsahuje přehled běžných problémů, ovlivňujících produktivitu a efektivitu ve stavebnictví, které mohou být vyřešeny pomocí automatizace a digitalizace staveniště. Dále jsou uvedeny příklady použiti moderních technologií ve stavebnictví. Autor prozkoumává dnešní stav českého stavebnictví a popisuje jeho schopnost uplatnit nové technologie díky příznivému ekonomickému prostředí.The main aim of this work is to describe design processes, modelling and manufacturing of the formwork for complex concrete structures with the application of several sophisticated software and technologies. Moreover, this work deals with the most widespread problems that have an impact on productivity and efficiency in the construction industry. These problems can be solved by automation and digitation of the construction site. Successful examples of utilizing modern technologies in construction are mentioned as well. The author reviews the contemporary conditions of the Czech construction sector and explains its ability to employ new technologies due to its favourable economic environment