1,434 research outputs found
5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments
For the development of new 5G systems to operate in bands up to 100 GHz,
there is a need for accurate radio propagation models at these bands that
currently are not addressed by existing channel models developed for bands
below 6 GHz. This document presents a preliminary overview of 5G channel models
for bands up to 100 GHz. These have been derived based on extensive measurement
and ray tracing results across a multitude of frequencies from 6 GHz to 100
GHz, and this document describes an initial 3D channel model which includes: 1)
typical deployment scenarios for urban microcells (UMi) and urban macrocells
(UMa), and 2) a baseline model for incorporating path loss, shadow fading, line
of sight probability, penetration and blockage models for the typical
scenarios. Various processing methodologies such as clustering and antenna
decoupling algorithms are also presented.Comment: To be published in 2016 IEEE 83rd Vehicular Technology Conference
Spring (VTC 2016-Spring), Nanjing, China, May 201
Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications
This paper compares three candidate large-scale propagation path loss models
for use over the entire microwave and millimeter-wave (mmWave) radio spectrum:
the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference
distance model, and the CI model with a frequency-weighted path loss exponent
(CIF). Each of these models have been recently studied for use in standards
bodies such as 3GPP, and for use in the design of fifth generation (5G)
wireless systems in urban macrocell, urban microcell, and indoor office and
shopping mall scenarios. Here we compare the accuracy and sensitivity of these
models using measured data from 30 propagation measurement datasets from 2 GHz
to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity
analyses of the three models show that the physically-based two-parameter CI
model and three-parameter CIF model offer computational simplicity, have very
similar goodness of fit (i.e., the shadow fading standard deviation), exhibit
more stable model parameter behavior across frequencies and distances, and
yield smaller prediction error in sensitivity testing across distances and
frequencies, when compared to the four-parameter ABG model. Results show the CI
model with a 1 m close-in reference distance is suitable for outdoor
environments, while the CIF model is more appropriate for indoor modeling. The
CI and CIF models are easily implemented in existing 3GPP models by making a
very subtle modification -- by replacing a floating non-physically based
constant with a frequency-dependent constant that represents free space path
loss in the first meter of propagation.Comment: Open access available at:
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=743465
Study on 3GPP Rural Macrocell Path Loss Models for Millimeter Wave Wireless Communications
Little research has been done to reliably model millimeter wave (mmWave) path
loss in rural macrocell settings, yet, models have been hastily adopted without
substantial empirical evidence. This paper studies past rural macrocell (RMa)
path loss models and exposes concerns with the current 3rd Generation
Partnership Project (3GPP) TR 38.900 (Release 14) RMa path loss models adopted
from the International Telecommunications Union - Radiocommunications (ITU-R)
Sector. This paper shows how the 3GPP RMa large-scale path loss models were
derived for frequencies below 6 GHz, yet they are being asserted for use up to
30 GHz, even though there has not been sufficient work or published data to
support their validity at frequencies above 6 GHz or in the mmWave bands. We
present the background of the 3GPP RMa path loss models and their use of odd
correction factors not suitable for rural scenarios, and show that the
multi-frequency close-in free space reference distance (CI) path loss model is
more accurate and reliable than current 3GPP and ITU-R RMa models. Using field
data and simulations, we introduce a new close-in free space reference distance
with height dependent path loss exponent model (CIH), that predicts rural
macrocell path loss using an effective path loss exponent that is a function of
base station antenna height. This work shows the CI and CIH models can be used
from 500 MHz to 100 GHz for rural mmWave coverage and interference analysis,
without any discontinuity at 6 GHz as exists in today's 3GPP and ITU-R RMa
models.Comment: To be published in 2017 IEEE International Conference on
Communications (ICC), Paris, France, May 201
Millimeter-wave communication for a last-mile autonomous transport vehicle
Low-speed autonomous transport of passengers and goods is expected to have a strong, positive impact on the reliability and ease of travelling. Various advanced functions of the involved vehicles rely on the wireless exchange of information with other vehicles and the roadside infrastructure, thereby benefitting from the low latency and high throughput characteristics that 5G technology has to offer. This work presents an investigation of 5G millimeter-wave communication links for a low-speed autonomous vehicle, focusing on the effects of the antenna positions on both the received signal quality and the link performance. It is observed that the excess loss for communication with roadside infrastructure in front of the vehicle is nearly half-power beam width independent, and the increase of the root mean square delay spread plays a minor role in the resulting signal quality, as the absolute times are considerably shorter than the typical duration of 5G New Radio symbols. Near certain threshold levels, a reduction of the received power affects the link performance through an increased error vector magnitude of the received signal, and subsequent decrease of the achieved data throughput
On the Temporal Effects of Mobile Blockers in Urban Millimeter-Wave Cellular Scenarios
Millimeter-wave (mmWave) propagation is known to be severely affected by the
blockage of the line-of-sight (LoS) path. In contrast to microwave systems, at
shorter mmWave wavelengths such blockage can be caused by human bodies, where
their mobility within environment makes wireless channel alternate between the
blocked and non-blocked LoS states. Following the recent 3GPP requirements on
modeling the dynamic blockage as well as the temporal consistency of the
channel at mmWave frequencies, in this paper a new model for predicting the
state of a user in the presence of mobile blockers for representative 3GPP
scenarios is developed: urban micro cell (UMi) street canyon and
park/stadium/square. It is demonstrated that the blockage effects produce an
alternating renewal process with exponentially distributed non-blocked
intervals, and blocked durations that follow the general distribution. The
following metrics are derived (i) the mean and the fraction of time spent in
blocked/non-blocked state, (ii) the residual blocked/non-blocked time, and
(iii) the time-dependent conditional probability of having blockage/no blockage
at time t1 given that there was blockage/no blockage at time t0. The latter is
a function of the arrival rate (intensity), width, and height of moving
blockers, distance to the mmWave access point (AP), as well as the heights of
the AP and the user device. The proposed model can be used for system-level
characterization of mmWave cellular communication systems. For example, the
optimal height and the maximum coverage radius of the mmWave APs are derived,
while satisfying the required mean data rate constraint. The system-level
simulations corroborate that the use of the proposed method considerably
reduces the modeling complexity.Comment: Accepted, IEEE Transactions on Vehicular Technolog
- …