Index to 1981 NASA Tech Briefs, volume 6, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1981 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

Wearable Sensors and Smart Devices to Monitor Rehabilitation Parameters and Sports Performance: An Overview

A quantitative evaluation of kinetic parameters, the joint’s range of motion, heart rate, and breathing rate, can be employed in sports performance tracking and rehabilitation monitoring following injuries or surgical operations. However, many of the current detection systems are expensive and designed for clinical use, requiring the presence of a physician and medical staff to assist users in the device’s positioning and measurements. The goal of wearable sensors is to overcome the limitations of current devices, enabling the acquisition of a user’s vital signs directly from the body in an accurate and non–invasive way. In sports activities, wearable sensors allow athletes to monitor performance and body movements objectively, going beyond the coach’s subjective evaluation limits. The main goal of this review paper is to provide a comprehensive overview of wearable technologies and sensing systems to detect and monitor the physiological parameters of patients during post–operative rehabilitation and athletes’ training, and to present evidence that supports the efficacy of this technology for healthcare applications. First, a classification of the human physiological parameters acquired from the human body by sensors attached to sensitive skin locations or worn as a part of garments is introduced, carrying important feedback on the user’s health status. Then, a detailed description of the electromechanical transduction mechanisms allows a comparison of the technologies used in wearable applications to monitor sports and rehabilitation activities. This paves the way for an analysis of wearable technologies, providing a comprehensive comparison of the current state of the art of available sensors and systems. Comparative and statistical analyses are provided to point out useful insights for defining the best technologies and solutions for monitoring body movements. Lastly, the presented review is compared with similar ones reported in the literature to highlight its strengths and novelties

NASA patent abstracts bibliography: A continuing bibliography. Section 1: Abstracts (supplement 34)

Abstracts are provided for 124 patents and patent applications entered into the NASA scientific and technical information systems during the period July 1988 through December 1988. Each entry consists of a citation, an abstract, and in most cases, a key illustration selected from the patent or patent application

New Approach of Indoor and Outdoor Localization Systems

Accurate determination of the mobile position constitutes the basis of many new applications. This book provides a detailed account of wireless systems for positioning, signal processing, radio localization techniques (Time Difference Of Arrival), performances evaluation, and localization applications. The first section is dedicated to Satellite systems for positioning like GPS, GNSS. The second section addresses the localization applications using the wireless sensor networks. Some techniques are introduced for localization systems, especially for indoor positioning, such as Ultra Wide Band (UWB), WIFI. The last section is dedicated to Coupled GPS and other sensors. Some results of simulations, implementation and tests are given to help readers grasp the presented techniques. This is an ideal book for students, PhD students, academics and engineers in the field of Communication, localization & Signal Processing, especially in indoor and outdoor localization domains

Electronics for Sensors

The aim of this Special Issue is to explore new advanced solutions in electronic systems and interfaces to be employed in sensors, describing best practices, implementations, and applications. The selected papers in particular concern photomultiplier tubes (PMTs) and silicon photomultipliers (SiPMs) interfaces and applications, techniques for monitoring radiation levels, electronics for biomedical applications, design and applications of time-to-digital converters, interfaces for image sensors, and general-purpose theory and topologies for electronic interfaces

Rock differentiation using microwave irradiation

Includes bibliographical references.This project arose as a result of inefficiencies in the diamond recovery process at Premier Mine. A considerable amount of barren waste rock, gabbro, is mined along with the diamond bearing kimberlite. No automated method exists for separating the kimberlite from the waste rock and a device was required to effect ore sorting on a rock by rock basis. Experimentation with a microwave oven indicated that samples of kimberlite were more attenuative than samples of gabbro. The possibility of using microwave heating for rock differentiation was investigated but was impractical to implement. A study of low power microwave attenuation and reflection measurements was undertaken. Reflection measurements were found to be impractical due to the similar amounts of reflected signal from the different rock types. Microwave signal attenuation through rock samples was studied over a broad frequency spectrum. A detectable difference in signal attenuation was found through the gabbro and kimberlite. The difference in signal attenuation increased with increasing frequency. Different techniques to implement signal attenuation measurements through rock samples were investigated. The passing of rock samples through waveguide structures was found to be impractical in this application. Microwave signal attenuation measurements were successful when rock samples were placed between a transmitting and a receiving antenna. Equipment was designed and constructed with an operating frequency of 35GHz chosen due to the small antenna aperture area and the large attenuation difference at this frequency. Static measurements with this equipment revealed the problems with signal scattering and reflection from some irregularly shaped samples of low loss gabbro. The importance of these phenomenon could only be gauged from dynamic measurements. Dynamic measurements were performed using a laboratory test system with a conveyor belt capable of moving at speeds of up to 5 m/s. It was found that 93% of the kimberlite could be correctly detected whilst rejecting 67% of the gabbro. The system functioned satisfactorily and led to the filing of several patents

Modern Telemetry

Telemetry is based on knowledge of various disciplines like Electronics, Measurement, Control and Communication along with their combination. This fact leads to a need of studying and understanding of these principles before the usage of Telemetry on selected problem solving. Spending time is however many times returned in form of obtained data or knowledge which telemetry system can provide. Usage of telemetry can be found in many areas from military through biomedical to real medical applications. Modern way to create a wireless sensors remotely connected to central system with artificial intelligence provide many new, sometimes unusual ways to get a knowledge about remote objects behaviour. This book is intended to present some new up to date accesses to telemetry problems solving by use of new sensors conceptions, new wireless transfer or communication techniques, data collection or processing techniques as well as several real use case scenarios describing model examples. Most of book chapters deals with many real cases of telemetry issues which can be used as a cookbooks for your own telemetry related problems

Environmental Biophysics

Ця книга призначена для студентів, які вивчають навколишнє середовище. Буде корисна для студентів, для яких англійська не є рідною мовою і які прагнуть покращити знання професійної англійської термінології, що дозволить краще зрозуміти сучасну наукову літературу, приймати активнішу участь в наукових міжнародних конференціях, симпозіумах, семінарах.This text-book: 1) provides a description of physical surrounding of living organisms; 2) elucidates the ability of living organisms to respond to the change of external factors due to receptor systems and to choose optimal conditions of survival; 3) gives information on the principles of operation of modern instrumentation for measure-ment of the environmental parameters with special emphasis on automated system and remote sensing of environmental components; 4) reviews transfer phenomena and processes which characterise the interaction of living or-ganisms with the environment; 5) considers the main principles of the solar radiation budget and the energy balance of physical and biological systems with the environment. This text-book is based on the concept of transfer phenomena – irreversible processes which are important from the point of view of viability of living organisms; the spatial transfer of physical values such as entropy, mass, energy, momentum, electric charges in the envi-ronment occurs due to these phenomena. Such an approach makes it possible to unite all bio-physical processes that characterise the interaction of living organisms with the environment. This text-book is intended for the students of Environmental Sciences. It will be useful for those students whose native language is not English and who want to improve the knowledge of professional English terminology that will make it possible to better understand modern literature, take a more active role in scientific missions abroad, get into contact with foreign colleagues, and enhance attendance at international conferences, symposiums, seminars, etc.Participation of Prof. Yuriy Posudin in research program in Japan was possible due to Fellowship of the Japan Society for the Promotion of Science, Fellow’s ID No.: S-07117 in 2007