Remote Vibration Estimation Using Displaced-Phase-Center Antenna SAR for Strong Clutter Environments

It has been previously demonstrated that it is possible to perform remote vibrometry using synthetic aperture radar (SAR) in conjunction with the discrete fractional Fourier transform (DFrFT). Specifically, the DFrFT estimates the chirp parameters (related to the instantaneous acceleration of a vibrating object) of a slow-time signal associated with the SAR image. However, ground clutter surrounding a vibrating object introduces uncertainties in the estimate of the chirp parameter retrieved via the DFrFT method. To overcome this shortcoming, various techniques based on subspace decomposition of the SAR slow-time signal have been developed. Nonetheless, the effectiveness of these techniques is limited to values of signal-to-clutter ratio ≥5 dB. In this paper, a new vibrometry technique based on displaced-phase-center antenna (DPCA) SAR is proposed. The main characteristic of a DPCA-SAR is that the clutter signal can be canceled, ideally, while retaining information on the instantaneous position and velocity of a target. In this paper, a novel method based on the extended Kalman filter (EKF) is introduced for performing vibrometry using the slow-time signal of a DPCA-SAR. The DPCA-SAR signal model for a vibrating target, the mathematical characterization of the EKF technique, and vibration estimation results for various types of vibration dynamics are presented

Radar Detection, Tracking and Identification for UAV Sense and Avoid Applications

Advances in Unmanned Aerial Vehicle (UAV) technology have enabled wider access for the general public leading to more stringent flight regulations, such as the line of sight restriction, for hobbyists and commercial applications. Improving sensor technology for Sense And Avoid (SAA) systems is currently a major research area in the unmanned vehicle community. This thesis overviews efforts made to advance intelligent algorithms used to detect, track, and identify commercial UAV targets by enabling rapid prototyping of novel radar techniques such as micro-Doppler radar target identification or cognitive radar. To enable empirical radar signal processing evaluations, an S-Band and X-Band frequency modulated, software-defined radar testbed is designed, implemented, and evaluated with field measurements. The final evaluations provide proof of functionality, performance measurements, and limitations of this testbed and future software-defined radars. The testbed is comprised of open-source software and hardware meant to accelerate the development of a reliable, repeatable, and scalable SAA system for the wide range of new and existing UAVs

Investigation of non-cooperative target recognition of small and slow moving air targets in modern air defence surveillance radar

This thesis covers research in the field of non-cooperative target recognition given the limitations of modern air defence surveillance radars. The potential presence of low observable manned or unmanned targets within the vast surveillance volume demand highly sensitive systems. This may again introduce unwanted detections of single birds of comparable radar cross section, previously avoided by use of wide clutter rejection filters and sensitivity time control. The demand for methods effectively separating between birds and slow moving manmade targets is evident. The research questions addressed are connected to identification of characteristic features of birds and manmade targets of comparable size. Ultimately the goal has been to find methods that can utilize such features to effectively distinguish between the classes. In contrast to the vast majority of non-cooperative target recognition publications, this thesis includes non-rigid targets covering a range of dielectric properties and targets falling in the resonant and Rayleigh scattering regions. These factors combined with insufficient spatial resolution for classification require alternative approaches such as utilization of periodic RCS modulation, micro-Doppler- and polarimetric signatures. Signatures of birds and UAVs are investigated through electromagnetic prediction and radar measurements. A flexible and fully polarimetric radar capable of simultaneous operation in both L- and S-band is developed for collection of relevant signatures. Inspired by the use of polarimetric radar for classification of precipitation covered in the weather radar literature, focus has been on using similar methods to recognize signatures of rotors, propellers and bird wings. Novel micro-Doppler signatures combining polarimetric information from this sensor is found to hold information about the orientation of such target parts. This information combined with several other features is evaluated for classification. The benefit from involving polarimetric measurements is especially investigated, and is found to be highly valuable when information provided by other methods is limited

Electromagnetic ray-tracing for the investigation of multipath and vibration signatures in radar imagery

Synthetic Aperture Radar (SAR) imagery has been used extensively within UK Defence and Intelligence for many years. Despite this, the exploitation of SAR imagery is still challenging to the inexperienced imagery analyst as the non-literal image provided for exploitation requires careful consideration of the imaging geometry, the target being imaged and the physics of radar interactions with objects. It is therefore not surprising to note that in 2017 the most useful tool available to a radar imagery analyst is a contextual optical image of the same area. This body of work presents a way to address this by adopting recent advances in radar signal processing and computational geometry to develop a SAR simulator called SARCASTIC (SAR Ray-Caster for the Intelligence Community) that can rapidly render a scene with the precise collection geometry of an image being exploited. The work provides a detailed derivation of the simulator from first principals. It is then validated against a range of real-world SAR collection systems. The work shows that such a simulator can provide an analyst with the necessary tools to extract intelligence from a collection that is unavailable to a conventional imaging system. The thesis then describes a new technique that allows a vibrating target to be detected within a SAR collection. The simulator is used to predict a unique scattering signature - described as a one-sided paired echo. Finally an experiment is described that was performed by Cranfield University to specifications determined by SARCASTIC which show that the unique radar signature can actually occur within a SAR collection

Radar Technology

In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

Exploring the surface of Titan

The exploration of Saturn's giant satellite Titan is considered, with particular reference to its surface which is hidden beneath a thick atmosphere. Groundbased observations, in which great progress has been made recently, and the measurements made by the Pioneer and Voyager spacecraft, are reviewed. Concepts for spacecraft to perform in-situ measurements on Titan are reviewed, as is the development of the NASA/ESA Cassini mission, how the mission constrains scientific investigations, and in turn how the mission has been constrained by funding pressures. The capabilities of the Cassini payload for investigating Titan's surface are critically assessed, and the ability of the Surface Science Package (SSP) on the Huygens probe to determine the composition of surface liquids is examined. Some thoughts on payload selection and the value of individual measurements are presented. The development of an impact penetrometer, and the interpretation of penetrometer and accelerometer data to measure surface mechanical properties, is described. It should be noted that Huygens is not a vehicle expressly designed as a lander, so the impact dynamics are complex. Additionally, the examination of the prospects offered by acoustic instrumentation are investigated. Modelling of a number of Titan surface processes is presented, including rainfall, photochemical and meteoric deposition, tidal dissipation in the interior, regolith processes such as volatile heat transport, annealing and aeolian transportation and the effects of tidal and crustal processes on lakes. A key subtopic of the thesis addresses the theme of planetary exploration as a whole, with the interaction between and the limitations of the exploration 'triad' of observations, insitu measurements and theory. Note is made of the remarkably significant role played by individuals and their perceptions