The multi-program performance model: debunking current practice in multi-core simulation

Composing a representative multi-program multi-core workload is non-trivial. A multi-core processor can execute multiple independent programs concurrently, and hence, any program mix can form a potential multi-program workload. Given the very large number of possible multiprogram workloads and the limited speed of current simulation methods, it is impossible to evaluate all possible multi-program workloads. This paper presents the Multi-Program Performance Model (MPPM), a method for quickly estimating multiprogram multi-core performance based on single-core simulation runs. MPPM employs an iterative method to model the tight performance entanglement between co-executing programs on a multi-core processor with shared caches. Because MPPM involves analytical modeling, it is very fast, and it estimates multi-core performance for a very large number of multi-program workloads in a reasonable amount of time. In addition, it provides confidence bounds on its performance estimates. Using SPEC CPU2006 and up to 16 cores, we report an average performance prediction error of 2.3% and 2.9% for system throughput (STP) and average normalized turnaround time (ANTT), respectively, while being up to five orders of magnitude faster than detailed simulation. Subsequently, we demonstrate that randomly picking a limited number of multi-program workloads, as done in current pactice, can lead to incorrect design decisions in practical design and research studies, which is alleviated using MPPM. In addition, MPPM can be used to quickly identify multi-program workloads that stress multi-core performance through excessive conflict behavior in shared caches; these stress workloads can then be used for driving the design process further

Analyzing and Predicting Processor Vulnerability to Soft Errors Using Statistical Techniques

The shrinking processor feature size, lower threshold voltage and increasing on-chip transistor density make current processors highly vulnerable to soft errors. Architectural Vulnerability Factor (AVF) reflects the probability that a raw soft error eventually causes a visible error in the program output, indicating the processor’s susceptibility to soft errors at architectural level. The awareness of the AVF, both at the early design stage and during program runtime, is greatly useful for designing reliable processors. However, measuring the AVF is extremely costly, resulting in large overheads in hardware, computation, and power. The situation is further exacerbated in a multi-threaded processor environment where resource contention and data sharing exist among different threads. Consequently, predicting the AVF from other easily-measured metrics becomes extraordinarily attractive to computer designers. We propose a series of AVF modeling and prediction works via using advanced statistical techniques. First, we utilize the Boosted Regression Trees (BRT) scheme to dynamically predict the AVF during program execution from a variety of performance metrics. This correlation is generalized to be across different workloads, program phases, and processor configurations on a single-threaded superscalar processor. Second, the AVF prediction is extended to multi-threaded processors where the inter-thread resource contention shows significant and non-uniform impacts on different programs; we propose a two-level predictive mechanism using BRT as building blocks to characterize the contention behavior. Finally, we employ a rule search strategy named Patient Rule Induction Method (PRIM) to explore a large processor design space at the early design stage. We are capable of generating selective rules on important configuration parameters. These rules quantify the design space subregion yielding lowest values of the response, thereby providing useful guidelines for designing reliable processors while achieving high performance

A comparison of cache hierarchies for SMT processors

In the multithread and multicore era, programs are forced to share part of the processor structures. On one hand, the state of the art in multithreading describes how efficiently manage and distribute inner resources such as reorder buffer or issue windows. On the other hand, there is a substantial body of works focused on outer resources, mainly on how to effectively share last level caches in multicores. Between these ends, first and second level caches have remained apart even if they are shared in most commercial multithreaded processors. This work analyzes multiprogrammed workloads as the worst-case scenario for cache sharing among threads. In order to obtain representative results, we present a sampling-based methodology that for multiple metrics such as STP, ANTT, IPC throughput, or fairness, reduces simulation time up to 4 orders of magnitude when running 8-thread workloads with an error lower than 3% and a confidence level of 97%. With the above mentioned methodology, we compare several state-of-the-art cache hierarchies, and observe that Light NUCA provides performance benefits in SMT processors regardless the organization of the last level cache. Most importantly, Light NUCA gains are consistent across the entire number of simulated threads, from one to eight.Peer ReviewedPostprint (author's final draft

SKIRT: hybrid parallelization of radiative transfer simulations

We describe the design, implementation and performance of the new hybrid parallelization scheme in our Monte Carlo radiative transfer code SKIRT, which has been used extensively for modeling the continuum radiation of dusty astrophysical systems including late-type galaxies and dusty tori. The hybrid scheme combines distributed memory parallelization, using the standard Message Passing Interface (MPI) to communicate between processes, and shared memory parallelization, providing multiple execution threads within each process to avoid duplication of data structures. The synchronization between multiple threads is accomplished through atomic operations without high-level locking (also called lock-free programming). This improves the scaling behavior of the code and substantially simplifies the implementation of the hybrid scheme. The result is an extremely flexible solution that adjusts to the number of available nodes, processors and memory, and consequently performs well on a wide variety of computing architectures.Comment: 21 pages, 20 figure

Improving IBM POWER8 Performance Through Symbiotic Job Scheduling

[EN] Symbiotic job scheduling, i.e., scheduling applications that co-run well together on a core, can have a considerable impact on the performance of processors with simultaneous multithreading (SMT) cores. SMT cores share most of their microarchitectural components among the co-running applications, which causes performance interference between them. Therefore, scheduling applications with complementary resource requirements on the same core can greatly improve the throughput of the system. This paper enhances symbiotic job scheduling for the IBM POWER8 processor. We leverage the existing cycle accounting mechanism to build an interference model that predicts symbiosis between applications. The proposed models achieve higher accuracy than previous models by predicting job symbiosis from throttled CPI stacks, i.e., CPI stacks of the applications when running in the same SMT mode to consider the statically partitioned resources, but without interference from other applications. The symbiotic scheduler uses these interference models to decide, at run-time, which applications should run on the same core or on separate cores. We prototype the symbiotic scheduler as a user-level scheduler in the Linux operating system and evaluate it on an IBM POWER8 server running multiprogram workloads. The symbiotic job scheduler significantly improves performance compared to both an agnostic random scheduler and the default Linux scheduler. Across all evaluated workloads in SMT4 mode, throughput improves by 12.4 and 5.1 percent on average over the random and Linux schedulers, respectively.This work was supported in part by the Spanish Ministerio de Econom ıa y Competitividad (MINECO) and Plan E funds, under grants TIN2015-66972- C5-1-R and TIN2014-62246-EXP, as well as by the European Research Council under the European Community’s Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement No. 259295.Feliu-Pérez, J.; Eyerman, S.; Sahuquillo Borrás, J.; Petit Martí, SV.; Eeckhout, L. (2017). Improving IBM POWER8 Performance Through Symbiotic Job Scheduling. IEEE Transactions on Parallel and Distributed Systems. 28(10):2838-2851. https://doi.org/10.1109/TPDS.2017.269170828382851281

Automated Experiments for Deriving Performance-relevant Properties of Software Execution Environments

The execution environment can play a crucial role when analyzing the performance of a software system. However, detecting execution environment properties and integrating such properties into performance analyses is a manual, error-prone task. In this thesis, a novel approach for detecting performance-relevant properties of the software execution environment is presented. These properties are automatically detected using predefined experiments and integrated into performance prediction tools

Analysis of Multi-Threading and Cache Memory Latency Masking on Processor Performance Using Thread Synchronization Technique

Multithreading is a process in which a single processor executes multiple threads concurrently. This enables the processor to divide tasks into separate threads and run them simultaneously, thereby increasing the utilization of available system resources and enhancing performance. When multiple threads share an object and one or more of them modify it, unpredictable outcomes may occur. Threads that exhibit poor locality of memory reference, such as database applications, often experience delays while waiting for a response from the memory hierarchy. This observation suggests how to better manage pipeline contention. To assess the impact of memory latency on processor performance, a dual-core MT machine with four thread contexts per core is utilized. These specific benchmarks are chosen to allow the workload to include programs with both favorable and unfavorable cache locality. To eliminate the issue of wasting the wake-up signals, this work proposes an approach that involves storing all the wake-up calls. It asserts the wake-up calls to the consumer and the producer can store the wake-up call in a variable.   An assigned value in working system (or kernel) storage that each process can check is a semaphore. Semaphore is a variable that reads, and update operations automatically in bit mode. It cannot be actualized in client mode since a race condition may persistently develop when two or more processors endeavor to induce to the variable at the same time. This study includes code to measure the time taken to execute both functions and plot the graph. It should be noted that sending multiple requests to a website simultaneously could trigger a flag, ultimately blocking access to the data. This necessitates some computation on the collected statistics. The execution time is reduced to one third when using threads compared to executing the functions sequentially. This exemplifies the power of multithreading

Modeling and scheduling heterogeneous multi-core architectures

Om de prestatie van toekomstige processors en processorarchitecturen te evalueren wordt vaak gebruik gemaakt van een simulator die het gedrag en de prestatie van de processor modelleert. De prestatie bepalen van de uitvoering van een computerprogramma op een gegeven processorarchitectuur m.b.v. een simulator duurt echter vele grootteordes langer dan de werkelijke uitvoeringstijd. Dit beperkt in belangrijke mate de hoeveelheid experimenten die gedaan kunnen worden. In dit doctoraatswerk werd het Multi-Program Performance Model (MPPM) ontwikkeld, een innovatief alternatief voor traditionele simulatie, dat het mogelijk maakt om tot 100.000x sneller een processorconfiguratie te evalueren. MPPM laat ons toe om nooit geziene exploraties te doen. Gebruik makend van dit raamwerk hebben we aangetoond dat de taakplanning cruciaal is om heterogene meerkernige processors optimaal te benutten. Vervolgens werd een nieuwe manier voorgesteld om op een schaalbare manier de taakplanning uit te voeren, namelijk Performance Impact Estimation (PIE). Tijdens de uitvoering van een draad op een gegeven processorkern schatten we de prestatie op een ander type kern op basis van eenvoudig op te meten prestatiemetrieken. Zo beschikken we op elk moment over alle nodige informatie om een efficiënte taakplanning te doen. Dit laat ons bovendien toe te optimaliseren voor verschillende criteria zoals uitvoeringstijd, doorvoersnelheid of fairness