10 research outputs found
Artificial Neural Network-based error compensation procedure for low-cost encoders
An Artificial Neural Network-based error compensation method is proposed for
improving the accuracy of resolver-based 16-bit encoders by compensating for
their respective systematic error profiles. The error compensation procedure,
for a particular encoder, involves obtaining its error profile by calibrating
it on a precision rotary table, training the neural network by using a part of
this data and then determining the corrected encoder angle by subtracting the
ANN-predicted error from the measured value of the encoder angle. Since it is
not guaranteed that all the resolvers will have exactly similar error profiles
because of the inherent differences in their construction on a micro scale, the
ANN has been trained on one error profile at a time and the corresponding
weight file is then used only for compensating the systematic error of this
particular encoder. The systematic nature of the error profile for each of the
encoders has also been validated by repeated calibration of the encoders over a
period of time and it was found that the error profiles of a particular encoder
recorded at different epochs show near reproducible behavior. The ANN-based
error compensation procedure has been implemented for 4 encoders by training
the ANN with their respective error profiles and the results indicate that the
accuracy of encoders can be improved by nearly an order of magnitude from
quoted values of ~6 arc-min to ~0.65 arc-min when their corresponding
ANN-generated weight files are used for determining the corrected encoder
angle.Comment: 16 pages, 4 figures. Accepted for Publication in Measurement Science
and Technology (MST
On the benefits of phase shift keying to optical telecommunication systems
Les avantages de la modulation de phase vis-à-vis la modulation d’intensité pour les réseaux optiques sont claires et accepté par la communauté scientifique des télécommunications optiques. Surtout, la modulation de phase montre une meilleure sensibilité au bruit, ainsi qu’une plus grande tolérance aux effets non-linéaires que la modulation d’intensité. Nous présentons dans cette thése un étude qui vise à développer les avantages de la modulation de phase. Nous attaquons d’abord la complexité du récepteur en détection directe, en proposant une nouvelle configuration dont la complexité est comparable à celle du récepteur pour la modulation d’intensité traditionnel, mais avec des meilleures performances. Cette solution pourrait convenir pour les réseaux métropolitains (et même d’accès) à haut débit binaire. Nous passons ensuite à l’examen de la possibilité d’utiliser des amplificateur à semi-conducteur (SOA) au lieu des amplificateurs à fibre dopée à l’erbium pour fournir amplification optique aux signaux modulés en phase. Les non-linéarité des SOA sont étudiées, et un compensateur simple et très efficace est proposé. Les avantages des amplificateurs à semi-conducteur par rapport à ceux à fibre sont bien connus. Surtout, la méthode que nous proposons permettrait l’integrabilité des SOA avec d’autres composants de réseau (par exemple, le récepteur nommé cidessus), menant à des solutions technologiques de petite taille et efficaces d’un point de vue énergétique. Il y a deux types de systèmes pour signaux modulés en phase: basé sur la détection directe, ou sur les récepteurs cohérents. Dans le dernière partie de ce travail, nous nous concentrons sur cette dernière catégorie, et nous comparons deux solutions possibles pour la mise à niveau des réseaux terrestres actuel. Nous comparons deux configurations dont les performances sont très comparables en termes de sensibilité au bruit, mais nous montrons comment la meilleure tolérance aux effets non linéaires (en particuliers dans les systèmes à débit mixte) fait que une solution soit bien plus efficace que l’autre.The advantages of phase modulation (PM) vis-à-vis intensity modulation for optical networks are accepted by the optical telecommunication community. PM exhibits a higher noise sensitivity than intensity modulation, and it is more tolerant to the effects of fiber nonlinearity. In this thesis we examine the challenges and the benefits of working with different aspects of phase modulation. Our first contribution tackles the complexity of the direct detection noncoherent receiver for differentially encoded quadrature phase shift keying. We examine a novel configuration whose complexity is comparable to that of traditional receivers for intensity modulation, yet outperforming it. We show that under severe nonlinear impairments, our proposed receiver works almost as well as the conventional receiver, with the advantage of being much less complex. We also show that the proposed receiver is tolerant to chromatic dispersion, and to detuning of the carrier frequency. This solution might be suitable for high-bit rates metro (and even access) networks. Our second contribution deals with the challenges of using semiconductor optical amplifiers (SOAs) instead of typical erbium doped fiber amplifiers (EDFAs) to provide amplification to phase modulated signals. SOAs nonlinearities are investigated, and we propose a simple and very effective feed-forward compensator. Above all, the method we propose would permit the integrability of SOAs with other network components (for example, the aforementioned receiver) achieving small size, power efficient sub-systems. Phase modulation paves the way to high spectral efficiency, especially when paired with digital coherent receivers. With the digital coherent receiver, the degree of freedom offered by polarization can be exploited to increase the channel bit rate without increasing its spectral occupancy. In the last part of this work we focus on polarization multiplexed signaling paired with coherent reception and digital signal processing. Our third contribution provides insight on the strategies for upgrading current terrestrial core networks to high bit rates. This is a particularly challenging scenario, as phase modulation has to coexist with previously installed intensity modulated channels. We compare two configurations which have received much attention in the literature. These solutions show comparable performance in terms of back-to-back noise sensitivity, and yet are not equivalent. We show how the superior tolerance to nonlinear fiber propagation (and particularly to cross phase modulation induced by the presence of intensity modulated channels) makes one of them much more effective than the other
包絡線パルス幅変調によるOFDM信号の光ファイバ無線伝送に関する研究
In this thesis, an Envelop Pulse-Width Modulation-RoF (EPWM-RoF) transmission scheme is proposed to solve the RoF nonlinearity and echo effect issues. Through the theoretical analysis, simulation and experimental results, it can be concluded that EPWM-RoF transmission is effective in dealing with E/O nonlinearity and echo effect in RoF channel.電気通信大学201
Nonlinear models and algorithms for RF systems digital calibration
Focusing on the receiving side of a communication system, the current trend in pushing the digital domain ever more closer to the antenna sets heavy constraints on the accuracy and linearity of the analog front-end and the conversion devices. Moreover, mixed-signal implementations of Systems-on-Chip using nanoscale CMOS processes result in an overall poorer analog performance and a reduced yield. To cope with the impairments of the low performance analog section in this "dirty RF" scenario, two solutions exist: designing more complex analog processing architectures or to identify the errors and correct them in the digital domain using DSP algorithms. In the latter, constraints in the analog circuits' precision can be offloaded to a digital signal processor.
This thesis aims at the development of a methodology for the analysis, the modeling and the compensation of the analog impairments arising in different stages of a receiving chain using digital calibration techniques.
Both single and multiple channel architectures are addressed exploiting the capability of the calibration algorithm to homogenize all the channels' responses of a multi-channel system in addition to the compensation of nonlinearities in each response. The systems targeted for the application of digital post compensation are a pipeline ADC, a digital-IF sub-sampling receiver and a 4-channel TI-ADC.
The research focuses on post distortion methods using nonlinear dynamic models to approximate the post-inverse of the nonlinear system and to correct the distortions arising from static and dynamic errors. Volterra model is used due to its general approximation capabilities for the compensation of nonlinear systems with memory. Digital calibration is applied to a Sample and Hold and to a pipeline ADC simulated in the 45nm process, demonstrating high linearity improvement even with incomplete settling errors enabling the use of faster clock speeds.
An extended model based on the baseband Volterra series is proposed and applied to the compensation of a digital-IF sub-sampling receiver. This architecture envisages frequency selectivity carried out at IF by an active band-pass CMOS filter causing in-band and out-of-band nonlinear distortions. The improved performance of the proposed model is demonstrated with circuital simulations of a 10th-order band pass filter, realized using a five-stage Gm-C Biquad cascade, and validated using out-of-sample sinusoidal and QAM signals. The same technique is extended to an array receiver with mismatched channels' responses showing that digital calibration can compensate the loss of directivity and enhance the overall system SFDR.
An iterative backward pruning is applied to the Volterra models showing that complexity can be reduced without impacting linearity, obtaining state-of-the-art accuracy/complexity performance.
Calibration of Time-Interleaved ADCs, widely used in RF-to-digital wideband receivers, is carried out developing ad hoc models because the steep discontinuities generated by the imperfect canceling of aliasing would require a huge number of terms in a polynomial approximation. A closed-form solution is derived for a 4-channel TI-ADC affected by gain errors and timing skews solving the perfect reconstruction equations. A background calibration technique is presented based on cyclo-stationary filter banks architecture. Convergence speed and accuracy of the recursive algorithm are discussed and complexity reduction techniques are applied
Techniques en appui des formats de modulation avancés pour les futurs réseaux optiques
Les systèmes de communication optique avec des formats de modulation avancés sont actuellement l’un des sujets de recherche les plus importants dans le domaine de communication optique. Cette recherche est stimulée par les exigences pour des débits de transmission de donnée plus élevés. Dans cette thèse, on examinera les techniques efficaces pour la modulation avancée avec une détection cohérente, et multiplexage par répartition en fréquence orthogonale (OFDM) et multiples tonalités discrètes (DMT) pour la détection directe et la détection cohérente afin d’améliorer la performance de réseaux optiques. Dans la première partie, nous examinons la rétropropagation avec filtre numérique (DFBP) comme une simple technique d’atténuation de nonlinéarité d’amplificateur optique semiconducteur (SOA) dans le système de détection cohérente. Pour la première fois, nous démontrons expérimentalement l’efficacité de DFBP pour compenser les nonlinéarités générées par SOA dans un système de détection cohérente porteur unique 16-QAM. Nous comparons la performance de DFBP avec la méthode de Runge-Kutta quatrième ordre. Nous examinons la sensibilité de performance de DFBP par rapport à ses paramètres. Par la suite, nous proposons une nouvelle méthode d’estimation de paramètre pour DFBP. Finalement, nous démontrons la transmission de signaux de 16-QAM aux taux de 22 Gbaud sur 80km de fibre optique avec la technique d’estimation de paramètre proposée pour DFBP. Dans la deuxième partie, nous nous concentrons sur les techniques afin d’améliorer la performance des systèmes OFDM optiques en examinent OFDM optiques cohérente (CO-OFDM) ainsi que OFDM optiques détection directe (DDO-OFDM). Premièrement, nous proposons une combinaison de coupure et prédistorsion pour compenser les distorsions nonlinéaires d’émetteur de CO-OFDM. Nous utilisons une interpolation linéaire par morceaux (PLI) pour charactériser la nonlinéarité d’émetteur. Dans l’émetteur nous utilisons l’inverse de l’estimation de PLI pour compenser les nonlinéarités induites à l’émetteur de CO-OFDM. Deuxièmement, nous concevons des constellations irrégulières optimisées pour les systèmes DDO-OFDM courte distance en considérant deux modèles de bruit de canal. Nous démontrons expérimentalement 100Gb/s+ OFDM/DMT avec la détection directe en utilisant les constellations QAM optimisées. Dans la troisième partie, nous proposons une architecture réseaux optiques passifs (PON) avec DDO-OFDM pour la liaison descendante et CO-OFDM pour la liaison montante. Nous examinons deux scénarios pour l’allocations de fréquence et le format de modulation des signaux. Nous identifions la détérioration limitante principale du PON bidirectionnelle et offrons des solutions pour minimiser ses effets.Optical communication systems with advanced modulation formats are currently one of the major research focuses of the optical communication community. This research is driven by the ever-increasing demand for higher data transmission rates. In this thesis, we investigate efficient techniques for advanced modulation with coherent detection, and optical orthogonal frequency-division multiplexing (OFDM) and discrete multi-tone (DMT) for both direct detection and coherent detection to improve the performance of optical networks. In the first part, we investigate digital filter back-propagation (DFBP) as a simple semiconductor optical amplifier (SOA) nonlinearity mitigation technique in coherent detection systems. For the first time, we experimentally demonstrate effectiveness of DFBP in compensating for SOA-induced nonlinearities in a 16-ary quadrature amplitude modulation (16-QAM) singlecarrier coherent detection system. We compare performance of DFBP with Runge-Kutta fourth-order method. We examine sensitivity of DFBP performance to its parameters. Afterwards, we propose a novel parameter estimation method for DFBP. Finally, we demonstrate successful transmission of 22 Gbaud 16-QAM signals over 80 km fiber with the proposed parameter estimation technique for DFBP. In the second part, we concentrate on techniques to improve performance of optical OFDM systems, examining both coherent optical OFDM (CO-OFDM) and direct-detection optical OFDM (DDO-OFDM). First, we propose a combination of clipping and predistortion technique to compensate for CO-OFDM transmitter nonlinear distortions. We use piecewise linear interpolation (PLI) for characterizing the transmitter nonlinearity. At the transmitter, we use inverse of the PLI estimate to pre-compensate the nonlinearities induced at the COOFDM transmitter. Second, we design optimized non-square constellations for short-reach DDO-OFDM systems based on two channel noise models. We experimentally demonstrate 100 Gb/s+ OFDM/DMT with direct detection using the optimized QAM constellations. In the third part, we propose and experimentally demonstrate a passive optical network (PON) architecture with DDO-OFDM for the downlink and CO-OFDM for the uplink. We examine two scenarios for the occupied frequency and modulation format of the signals. We identify main limiting impairments of the bidirectional PON and provide solutions to minimize their effects
Design and optimization next generation passive all-optical networks
Doutoramento em Engenharia Electrotécnica/TelecomunicaçõesEste trabalho investiga novas metodologias para as redes óticas de acesso de
próxima geração (NG-OAN). O trabalho está dividido em quatro tópicos de
investigação: projeto da rede, modelos numéricos para efeitos não lineares
da fibra ótica, impacto dos efeitos não lineares da fibra ótica e otimização
da rede.
A rede ótica de acesso investigada nesse trabalho está projetado para suprir
os requisitos de densidade de utilizadores e cobertura, isto é, suportar
muitos utilizadores ( 1000) com altas velocidades de conexão dedicada ( 1
Gb/s) ocupando uma faixa estreita do espectro ( 25 nm) e comprimentos
de fibra ótica até 100 km. Os cenários são baseados em redes óticas
passivas com multiplexagem por divisão no comprimento de onda de alta
densidade (UDWDM-PON) utilizando transmissores/receptores coerentes
nos terminais da rede. A rede é avaliada para vários ritmos de transmissão
usando formatos de modulação avançados, requisitos de largura de banda
por utilizador e partilha de banda com tecnologias tradicionais de redes óticas
passivas (PON).
Modelos numéricos baseados em funções de transferência das séries de
Volterra (VSTF) são demonstrados tanto para a análise dos efeitos não
lineares da fibra ótica quanto para avaliação do desempenho total da rede.
São apresentadas as faixas de potência e distância de transmissão nas quais
as séries de Volterra apresentam resultados semelhantes ao modelo referência
Split-Step Fourier (SSF) (validado experimentalmente) para o desempenho
total da rede. Além disso, um algoritmo, que evita componentes espectrais
com intensidade nulo, é proposto para realizar cálculos rápidos das séries. O
modelo VSTF é estendido para identificar unicamente os efeitos não lineares
da fibra ótica mais relevantes no cenário investigado: Self-Phase Modulation
(SPM), Cross-Phase Modulation (XPM) e Four-Wave Mixing (FWM).
Simulações numéricas são apresentadas para identificar o impacto isolado de
cada efeito não linear da fibra ótica, SPM, XPM e FWM, no desempenho
da rede com detecção coerente UDWDM-PON, transportando canais com
modulação digital em fase (M-ária PSK) ou modulação digital em amplitude
(M-ária QAM). A análise numérica é estendida para diferentes comprimentos
de fibra ótica mono modo (SSMF), potência por canal e ritmo de transmissão
por canal. Por conseguinte, expressões analíticas são extrapoladas para
determinar a evolução do SPM, XPM e FWM em função da potência e
distância de transmissão em cenários NG-OAN.
O desempenho da rede é otimizada através da minimização parcial da
interferência FWM (via espaçamento desigual dos canais), que nesse caso,
é o efeito não linear da fibra ótica mais relevante. Direções para melhorias
adicionas no desempenho da rede são apresentados para cenários em que o
XPM é relevante, isto é, redes transportando formatos de modulação QAM.
A solução, nesse caso, é baseada na utilização de técnicas de processamento
digital do sinal.This work investigates novel methodologies and models for Next-Generation
Optical Access Networks (NG-OAN). The work is divided into four main
topics of research: network design, numerical models for fiber nonlinear
effects, impact of fiber nonlinear effects and network optimization.
The used case optical access network is designed to cope with high
user density over extended reach, i.e. support large number of
users ( 1000) with high speed dedicated connections ( 1 Gb/s) in a
narrow bandwidth ( 25 nm) distributed up to 100 km. The scenarios
rely on Ultra-Dense Wavelength-Division Multiplexing Passive Optical
Networks (UDWDM-PON) employing coherent transceivers in the network
terminals. The network is evaluated for various transmission rates using
advanced modulation formats, transmitters and receivers specifications,
user bandwidth requirements and coexistence with legacy Passive Optical
Network (PON) technologies.
Numerical models based on Volterra Series Transfer Function (VSTF) are
demonstrated for both the analysis of fiber nonlinear effects and evaluation of
the overall network performance. It is presented the power and transmission
ranges that Volterra series provides accurate results, compared to the
reference model Split-Step Fourier (SSF) (experimentally validated), for the
overall network performance. Moreover, an algorithm is proposed to provide
fast numerical calculations of the series by avoiding zero intensity signal
frequency components. The VSTF model is extended to identify the sole
effect of the most relevant fiber nonlinearities in UDWDM-PON network
scenarios: Self-Phase Modulation (SPM), Cross-Phase Modulation (XPM)
and Four-Wave Mixing (FWM).
Numerical simulations are performed to identify the impact of each nonlinear
effect, SPM, XPM and FWM, on the performance of coherent UDWDMPON
transporting either M-ary PSK (Phase-Shift Keying) or M-ary QAM
(Quadrature Amplitude Modulation) modulated channels. The analysis is
extended to different lengths of Standard Single-Mode Fibers (SSMF), power
per channel and bit rate per channel. From that, analytic expressions are
extrapolated to find the evolution of SPM, XPM and FWM with power and
transmission distance for NG-AON scenarios.
The performance of the network is optimized by mitigating some of the FWM
crosstalk (unequally spaced channels), which in this case is the most relevant
fiber nonlinear effect. The directions for further performance improvements
are pointed out for scenarios in which XPM is enhanced, i.e. networks
transporting QAM signaling. The solution in this case is based on digital
signal processing techniques
Network-on-Chip
Limitations of bus-based interconnections related to scalability, latency, bandwidth, and power consumption for supporting the related huge number of on-chip resources result in a communication bottleneck. These challenges can be efficiently addressed with the implementation of a network-on-chip (NoC) system. This book gives a detailed analysis of various on-chip communication architectures and covers different areas of NoCs such as potentials, architecture, technical challenges, optimization, design explorations, and research directions. In addition, it discusses current and future trends that could make an impactful and meaningful contribution to the research and design of on-chip communications and NoC systems
Observing and Modeling the Physical Layer Phenomena in Open Optical Systems for Network planning and management
L'abstract è presente nell'allegato / the abstract is in the attachmen
Receiver design for nonlinearly distorted OFDM : signals applications in radio-over-fiber systems
Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Universidade do Porto. Faculdade de Engenharia. 201
Methodology and Measurement Setup for Analog-to-Digital Converter Postcompensation
We present a methodology for nonlinearity compensation amenable to a wide variety of analog-to-digital converters (ADCs). To that purpose, a postcompensation scheme for a commercial ADC is presented and two compensator models are considered: the memory polynomial (MP) and the modified generalized MP. Since the proposed method does not use any information about the compensated architecture, it can be applied to different ADC designs. Furthermore, we address the measurement and characterization setup of the device under test by making a study of the quality of the signals involved to verify the improvement obtained. The issue of the training sequences required by the proposed compensation method is also addressed in detail. Despite the common use of a single training signal, we propose to use several sinusoids in the bandwidth of interest. With this, it is possible to show that the generalization properties of the estimated postcompensator are greatly enhanced compared with the case of a single sinusoid training sequence. As verified by the measurements, considerable gain in accuracy can be obtained using the proposed methodology. In particular, a 10-dB increment in spurious free dynamic range is obtained using the proposed postcompensators over the complete Nyquist frequency band.Fil: Schmidt, Christian Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; ArgentinaFil: Lifschitz, Omar. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; ArgentinaFil: Cousseau, Juan Edmundo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; ArgentinaFil: Figueroa, Jose Luis. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; ArgentinaFil: Julian, Pedro Marcelo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; Argentin