MADX: Memristors-As-Drivers for Crossbar logic

Memristors have the potential to not only replace conventional memory, but also to open up new design possibilities because they store 1s and 0s as resistances rather than voltages. A memristor architecture that has attracted interest for its versatility and ease of integration with existing CMOS technologies is the crossbar array. In this paper, I modify the MAD scheme to create the MADX scheme for performing basic logic operations within a crossbar array. Then, I compare this scheme against two of the most well-known schemes, MAGIC and IMPLY. In the case study of a full-adder, both a one-bit and an 8-bit version, the MADX scheme achieves lower latency and substantially lower area requirements than both MAGIC and IMPLY. This is because it is more flexible about storing output values than either, does not destroy input values unlike IMPLY, and has more basic operations. In particular, it has XOR, which neither IMPLY nor MAGIC have and is useful for additionPlan II Honors Progra

Hybrid memristor-CMOS implementation of logic gates design using LTSpice

In this paper, a hybrid memristor-CMOS implementation of logic gates simulated using LTSpice. Memristors' implementation in computer architecture designs explored in various design structures proposed by researchers from all around the world. However, all prior designs have some drawbacks in terms of applicability, scalability, and performance. In this research, logic gates design based on the hybrid memristor-CMOS structure presented. 2-inputs AND, OR, NAND, NOR, XOR, and XNOR are demonstrated with minimum components requirements. In addition, a 1-bit full adder circuit with high performance and low area consumption is also proposed. The proposed full adder only consists of 4 memristors and 7 CMOS transistors. Half design of the adder base on the memristor component created. Through analysis and simulations, the memristor implementation on designing logic gates using memristor-CMOS structure demonstrated using the generalized metastable switch memristor (MSS) model and LTSpice. In conclusion, the proposed approach improves speed and require less area

Optimized Implementation of Memristor-Based Full Adder by Material Implication Logic

Recently memristor-based applications and circuits are receiving an increased attention. Furthermore, memristors are also applied in logic circuit design. Material implication logic is one of the main areas with memristors. In this paper an optimized memristor-based full adder design by material implication logic is presented. This design needs 27 memristors and less area in comparison with typical CMOS-based 8-bit full adders. Also the presented full adder needs only 184 computational steps which enhance former full adder design speed by 20 percent.Comment: International Conference on Electronics Circuits and Systems (ICECS), 201

Is Spiking Logic the Route to Memristor-Based Computers?

Memristors have been suggested as a novel route to neuromorphic computing based on the similarity between neurons (synapses and ion pumps) and memristors. The D.C. action of the memristor is a current spike, which we think will be fruitful for building memristor computers. In this paper, we introduce 4 different logical assignations to implement sequential logic in the memristor and introduce the physical rules, summation, `bounce-back', directionality and `diminishing returns', elucidated from our investigations. We then demonstrate how memristor sequential logic works by instantiating a NOT gate, an AND gate and a Full Adder with a single memristor. The Full Adder makes use of the memristor's memory to add three binary values together and outputs the value, the carry digit and even the order they were input in.Comment: Conference paper. Work also reported in US patent: `Logic device and method of performing a logical operation', patent application no. 14/089,191 (November 25, 2013

Memcapacitive Devices in Logic and Crossbar Applications

Over the last decade, memristive devices have been widely adopted in computing for various conventional and unconventional applications. While the integration density, memory property, and nonlinear characteristics have many benefits, reducing the energy consumption is limited by the resistive nature of the devices. Memcapacitors would address that limitation while still having all the benefits of memristors. Recent work has shown that with adjusted parameters during the fabrication process, a metal-oxide device can indeed exhibit a memcapacitive behavior. We introduce novel memcapacitive logic gates and memcapacitive crossbar classifiers as a proof of concept that such applications can outperform memristor-based architectures. The results illustrate that, compared to memristive logic gates, our memcapacitive gates consume about 7x less power. The memcapacitive crossbar classifier achieves similar classification performance but reduces the power consumption by a factor of about 1,500x for the MNIST dataset and a factor of about 1,000x for the CIFAR-10 dataset compared to a memristive crossbar. Our simulation results demonstrate that memcapacitive devices have great potential for both Boolean logic and analog low-power applications