Development of Energy Efficiency Aware Applications Using Commercial Low Power Embedded Systems

Embedded system

SEE sensitivity of a COTS 28-nm SRAM-based FPGA under thermal neutrons and different incident angles

This paper provides an experimental study of the single-event upset (SEU) susceptibility against thermal neutron radiation of a 28-nm bulk Commercial-Off-The-Shelf (COTS) Xilinx Artix-7 FPGA under different angles of incidence. Experimental results indicating SEUs on configuration RAM (CRAM) cells, Flip-Flops (FFs), and Block RAMs (BRAMs) are presented and discussed. Shapes of multiple events (ranging from 2 to 12-bit) are also analyzed, and their dependency on the incident angle of the particle beam against the device’s surface. Possible shapes of 128 and 384-bit multiple events are also investigated, revealing a trend to follow word lines. The results of the front incident angle are compared with 14.2-MeV neutrons, demonstrating a considerable difference in the device’s sensitivity against both irradiation sources. Finally, a modeling tool called MUSCA-SEP3 is used to predict the device’s sensitivity under the same environmental conditions. The obtained experimental results will show a good agreement with the predicted ones in a very accurate way

Predictive Dynamic Thermal and Power Management for Heterogeneous Mobile Platforms

abstract: Heterogeneous multiprocessor systems-on-chip (MPSoCs) powering mobile platforms integrate multiple asymmetric CPU cores, a GPU, and many specialized processors. When the MPSoC operates close to its peak performance, power dissipation easily increases the temperature, hence adversely impacts reliability. Since using a fan is not a viable solution for hand-held devices, there is a strong need for dynamic thermal and power management (DTPM) algorithms that can regulate temperature with minimal performance impact. This abstract presents a DTPM algorithm based on a practical temperature prediction methodology using system identification. The DTPM algorithm dynamically computes a power budget using the predicted temperature, and controls the types and number of active processors as well as their frequencies. Experiments on an octa-core big.LITTLE processor and common Android apps demonstrate that the proposed technique predicts temperature within 3% accuracy, while the DTPM algorithm provides around 6x reduction in temperature variance, and as large as 16% reduction in total platform power compared to using a fan.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Design automation and analysis of three-dimensional integrated circuits

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2004.Includes bibliographical references (p. 165-176).This dissertation concerns the design of circuits and systems for an emerging technology known as three-dimensional integration. By stacking individual components, dice, or whole wafers using a high-density electromechanical interconnect, three-dimensional integration can achieve scalability and performance exceeding that of conventional fabrication technologies. There are two main contributions of this thesis. The first is a computer-aided design flow for the digital components of a three-dimensional integrated circuit (3-D IC). This flow primarily consists of two software tools: PR3D, a placement and routing tool for custom 3-D ICs based on standard cells, and 3-D Magic, a tool for designing, editing, and testing physical layout characteristics of 3-D ICs. The second contribution of this thesis is a performance analysis of the digital components of 3-D ICs. We use the above tools to determine the extent to which 3-D integration can improve timing, energy, and thermal performance. In doing so, we verify the estimates of stochastic computational models for 3-D IC interconnects and find that the models predict the optimal 3-D wire length to within 20% accuracy. We expand upon this analysis by examining how 3-D technology factors affect the optimal wire length that can be obtained. Our ultimate analysis extends this work by directly considering timing and energy in 3-D ICs. In all cases we find that significant performance improvements are possible. In contrast, thermal performance is expected to worsen with the use of 3-D integration. We examine precisely how thermal behavior scales in 3-D integration and determine quantitatively how the temperature may be controlled during the circuit placement process. We also show how advanced packaging(cont.) technologies may be leveraged to maintain acceptable die temperatures in 3-D ICs. Finally, we explore two issues for the future of 3-D integration. We determine how technology scaling impacts the effect of 3-D integration on circuit performance. We also consider how to improve the performance of digital components in a mixed-signal 3-D integrated circuit. We conclude with a look towards future 3-D IC design tools.by Shamik Das.Ph.D

Low-power instruction-caches design for embedded microprocessors

Ph.DDOCTOR OF PHILOSOPH

Modeling and design of high speed SRAM based memory chip

SRAM is used as Cache memory which is very fast and used to speed up the task of processor and memory interface. With improvements in VLSI technology, processor speeds have increased. The improvements in SRAM speed of operation with increased integration, bigger sizes, technology shrinking and power dissipation is required to match with improved processor. 2kb SRAM block is designed and tested for proper read and write operation. The single SRAM cell, the 32x32 memory array, along with the decoder circuit, the sense enable and write enable logic, are placed out. The different critical paths of the system, comprising of the row and the column decoder, the column mux and the read-write circuits are recognized and sized to meet the target specifications. Simple model for distributed interconnect delays, is introduced and verified by Cadence simulations, their necessity is demonstrated. The models for the delay of a SRAM are used to determine the array sizes for a SRAM. An analytical delay model is proposed to predict the block size for SRAM; proposed model is based on dynamic strategies for word line charging and bit line discharging. Novel Sense Amplifier (SA) circuit for 2kb SRAM is presented and analyzed in this work. Sense amplifier using decoupled latch with current controlled architecture is proposed and compared with Current controlled latch SA using 90nm CMOS technology. Delay and power dissipation in proposed SA is 21.5% and 18.5% less than that of the current controlled SA. Butterfly architecture that is central decoding scheme is used to make a 2kb block from 1kb, after simulations, the maximum operating frequency of the system was found to be 800MHz

Micro-architecture level low power design for microprocessors

Ph.DDOCTOR OF PHILOSOPH