Effect of age and cytoskeletal elements on the indentation-dependent mechanical properties of chondrocytes.

Articular cartilage chondrocytes are responsible for the synthesis, maintenance, and turnover of the extracellular matrix, metabolic processes that contribute to the mechanical properties of these cells. Here, we systematically evaluated the effect of age and cytoskeletal disruptors on the mechanical properties of chondrocytes as a function of deformation. We quantified the indentation-dependent mechanical properties of chondrocytes isolated from neonatal (1-day), adult (5-year) and geriatric (12-year) bovine knees using atomic force microscopy (AFM). We also measured the contribution of the actin and intermediate filaments to the indentation-dependent mechanical properties of chondrocytes. By integrating AFM with confocal fluorescent microscopy, we monitored cytoskeletal and biomechanical deformation in transgenic cells (GFP-vimentin and mCherry-actin) under compression. We found that the elastic modulus of chondrocytes in all age groups decreased with increased indentation (15-2000 nm). The elastic modulus of adult chondrocytes was significantly greater than neonatal cells at indentations greater than 500 nm. Viscoelastic moduli (instantaneous and equilibrium) were comparable in all age groups examined; however, the intrinsic viscosity was lower in geriatric chondrocytes than neonatal. Disrupting the actin or the intermediate filament structures altered the mechanical properties of chondrocytes by decreasing the elastic modulus and viscoelastic properties, resulting in a dramatic loss of indentation-dependent response with treatment. Actin and vimentin cytoskeletal structures were monitored using confocal fluorescent microscopy in transgenic cells treated with disruptors, and both treatments had a profound disruptive effect on the actin filaments. Here we show that disrupting the structure of intermediate filaments indirectly altered the configuration of the actin cytoskeleton. These findings underscore the importance of the cytoskeletal elements in the overall mechanical response of chondrocytes, indicating that intermediate filament integrity is key to the non-linear elastic properties of chondrocytes. This study improves our understanding of the mechanical properties of articular cartilage at the single cell level

An individual based computational model of intestinal crypt fission and its application to predicting unrestrictive growth of the intestinal epithelium.

Intestinal crypt fission is a homeostatic phenomenon, observable in healthy adult mucosa, but which also plays a pathological role as the main mode of growth of some intestinal polyps. Building on our previous individual based model for the small intestinal crypt and on in vitro cultured intestinal organoids, we here model crypt fission as a budding process based on fluid mechanics at the individual cell level and extrapolated predictions for growth of the intestinal epithelium. Budding was always observed in regions of organoids with abundant Paneth cells. Our data support a model in which buds are biomechanically initiated by single stem cells surrounded by Paneth cells which exhibit greater resistance to viscoelastic deformation, a hypothesis supported by atomic force measurements of single cells. Time intervals between consecutive budding events, as simulated by the model and observed in vitro, were 2.84 and 2.62 days, respectively. Predicted cell dynamics was unaffected within the original crypt which retained its full capability of providing cells to the epithelium throughout fission. Mitotic pressure in simulated primary crypts forced upward migration of buds, which simultaneously grew into new protruding crypts at a rate equal to 1.03 days-1 in simulations and 0.99 days-1 in cultured organoids. Simulated crypts reached their final size in 4.6 days, and required 40 6.2 days to migrate to the top of the primary crypt. The growth of the secondary crypt is independent of its migration along the original crypt. Assuming unrestricted crypt fission and multiple budding events, a maximal growth rate of the intestinal epithelium of 0.10 days-1 43 is predicted and thus approximately 22 days are required for a 10-fold increase of polyp size. These predictions are in agreement with the time reported to develop macroscopic adenomas in mice after loss of Apc in intestinal stem cells

An atomic force microscope operating at hypergravity for in situ measurement of cellular mechano-response

We present a novel atomic force microscope (AFM) system, operational in liquid at variable gravity, dedicated to image cell shape changes of cells in vitro under hypergravity conditions. The hypergravity AFM is realized by mounting a stand-alone AFM into a large-diameter centrifuge. The balance between mechanical forces, both intra- and extracellular, determines both cell shape and integrity. Gravity seems to be an insignificant force at the level of a single cell, in contrast to the effect of gravity on a complete (multicellular) organism, where for instance bones and muscles are highly unloaded under near weightless (microgravity) conditions. However, past space flights and ground based cell biological studies, under both hypogravity and hypergravity conditions have shown changes in cell behaviour (signal transduction), cell architecture (cytoskeleton) and proliferation. Thus the role of direct or indirect gravity effects at the level of cells has remained unclear. Here we aim to address the role of gravity on cell shape. We concentrate on the validation of the novel AFM for use under hypergravity conditions. We find indications that a single cell exposed to 2 to 3 × g reduces some 30–50% in average height, as monitored with AFM. Indeed, in situ measurements of the effects of changing gravitational load on cell shape are well feasible by means of AFM in liquid. The combination provides a promising technique to measure, online, the temporal characteristics of the cellular mechano-response during exposure to inertial forces

Contact-induced apical asymmetry drives the thigmotropic responses of Candida albicans hyphae

Acknowledgements We thank Marco Thiel for assistance with data interpretation, Peter Sudbery for the provision of strains and Jeremy Craven for useful discussions. This work was supported by a BBSRC-DTG to D. D. T., NIH award DK083592 to F. J. B. and P. A. J., and a Royal Society URF UF080611 and MRC NIRG 90671 to A. C. B.Non peer reviewedPublisher PD

Effect of sterilization by gamma radiation on nano-mechanical properties of teeth

NOTICE: this is the author’s version of a work that was accepted for publication in Dental Materials. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Dental Materials, [VOL 24, ISSUE 8, (2008)] DOI: 10.1016/j.dental.2008.02.016.Objectives: Extracted teeth used in dental research need to be considered infective and hence be sterilized without the materials' properties being altered. This study examined the effect of gamma radiation on the nano-mechanical properties of dentin and enamel of extracted human third molars. Methods: Whole teeth were sterilized using gamma radiation doses of 7kGy and 35kGy, respectively; teeth of the control group were not treated with gamma radiation. Crowns were sectioned occlusally and polished. Elastic modulus and hardness were tested using atomic force microscopy with nano-indentations under wet conditions. Results: The authors found no significant dose-response relationship in elastic modulus or hardness in either dentin or enamel. Significance: Nano-indentation is a common technique for the determination of local mechanical properties in biological hard tissues. Gamma radiation is an efficient way to sterilize extracted teeth while alteration of dentin and enamel mechanical properties are minimized

Applications of AFM in pharmaceutical sciences

Atomic force microscopy (AFM) is a high-resolution imaging technique that uses a small probe (tip and cantilever) to provide topographical information on surfaces in air or in liquid media. By pushing the tip into the surface or by pulling it away, nanomechanical data such as compliance (stiffness, Young’s Modulus) or adhesion, respectively, may be obtained and can also be presented visually in the form of maps displayed alongside topography images. This chapter outlines the principles of operation of AFM, describing some of the important imaging modes and then focuses on the use of the technique for pharmaceutical research. Areas include tablet coating and dissolution, crystal growth and polymorphism, particles and fibres, nanomedicine, nanotoxicology, drug-protein and protein-protein interactions, live cells, bacterial biofilms and viruses. Specific examples include mapping of ligand-receptor binding on cell surfaces, studies of protein-protein interactions to provide kinetic information and the potential of AFM to be used as an early diagnostic tool for cancer and other diseases. Many of these reported investigations are from 2011-2014, both from the literature and a few selected studies from the authors’ laboratories

The intrinsic stiffness of human trabecular meshwork cells increases with senescence.

Dysfunction of the human trabecular meshwork (HTM) plays a central role in the age-associated disease glaucoma, a leading cause of irreversible blindness. The etiology remains poorly understood but cellular senescence, increased stiffness of the tissue, and the expression of Wnt antagonists such as secreted frizzled related protein-1 (SFRP1) have been implicated. However, it is not known if senescence is causally linked to either stiffness or SFRP1 expression. In this study, we utilized in vitro HTM senescence to determine the effect on cellular stiffening and SFRP1 expression. Stiffness of cultured cells was measured using atomic force microscopy and the morphology of the cytoskeleton was determined using immunofluorescent analysis. SFRP1 expression was measured using qPCR and immunofluorescent analysis. Senescent cell stiffness increased 1.88±0.14 or 2.57±0.14 fold in the presence or absence of serum, respectively. This was accompanied by increased vimentin expression, stress fiber formation, and SFRP1 expression. In aggregate, these data demonstrate that senescence may be a causal factor in HTM stiffening and elevated SFRP1 expression, and contribute towards disease progression. These findings provide insight into the etiology of glaucoma and, more broadly, suggest a causal link between senescence and altered tissue biomechanics in aging-associated diseases

Measuring cell adhesion forces with the atomic force microscope at the molecular level

In the past 25 years many techniques have been developed to characterize cell adhesion and to quantify adhesion forces. Atomic force microscopy (AFM) has been used to measure forces in the pico-newton range, an experimental technique known as force spectroscopy. We modified such an AFM to measure adhesion forces between live cells or between cells and surfaces. This strategy required functionalizing the surface of the sensors for immobilizing the cell. We used Dictyostelium discoideum cells which respond to starvation by surface expression of the adhesion molecule csA and consequent aggregation to measure the adhesion force of a single csA-csA bond. Relevant experimental parameters include the duration of contact between the interacting surfaces, the force against which this contact is maintained, the number and specificity of interacting adhesion molecules and the constituents of the medium in which the interaction occurs. This technology also permits the measurement of the viscoelastic properties of single cells or cell layers. Copyright (C) 2002 S, Karger AG, Basel

Contractile deficits in engineered cardiac microtissues as a result of MYBPC3 deficiency and mechanical overload.

The integration of in vitro cardiac tissue models, human induced pluripotent stem cells (hiPSCs) and genome-editing tools allows for the enhanced interrogation of physiological phenotypes and recapitulation of disease pathologies. Here, using a cardiac tissue model consisting of filamentous three-dimensional matrices populated with cardiomyocytes derived from healthy wild-type (WT) hiPSCs (WT hiPSC-CMs) or isogenic hiPSCs deficient in the sarcomere protein cardiac myosin-binding protein C (MYBPC3-/- hiPSC-CMs), we show that the WT microtissues adapted to the mechanical environment with increased contraction force commensurate to matrix stiffness, whereas the MYBPC3-/- microtissues exhibited impaired force development kinetics regardless of matrix stiffness and deficient contraction force only when grown on matrices with high fibre stiffness. Under mechanical overload, the MYBPC3-/- microtissues had a higher degree of calcium transient abnormalities, and exhibited an accelerated decay of calcium dynamics as well as calcium desensitization, which accelerated when contracting against stiffer fibres. Our findings suggest that MYBPC3 deficiency and the presence of environmental stresses synergistically lead to contractile deficits in cardiac tissues