State-of-the-art in Power Line Communications: from the Applications to the Medium

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and broadband systems, covering potential applications, regulatory and standardization efforts and recent research advancements in channel characterization, physical layer performance, medium access and higher layer specifications and evaluations. We also identify areas of current and further study that will enable the continued success of power line communication technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on Selected Areas in Communications. Special Issue on Power Line Communications and its Integration with the Networking Ecosystem. 201

Analysis of power line communications for last-hop backhaul in small cells deployment

Publicado en: :(2019-04-05),(José A. Cortes, Francisco J. Cañete, Matías Toril, Luis Díez, Alicia García-Mozos, "Analysis of power line communications for last-hop backhaul in small cells deployment", in Proceedings of the IEEE International Symposium on Power Line Communications and its Applications, 2019.),yEditor(IEEE)The purpose of this work is to study the feasibility of using power line communications (PLC) over outdoor public lighting networks (OPLN) for last-hop backhaul in small cell deployment. The analysis is based on actual noise measurements performed in two OPLN in the city of Málaga (Spain) and on a bottom-up channel simulator, which has been designed according to the physical characteristics and the common practices in such kind of networks. Estimations of the bit-rate achieved by PLC systems following the ITU-T Rec. G.9960 (G.hn) standard, are performed and discussed. Results indicate that PLC is a promising solution for this application.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Performance assessment of wireless Two Way Relay Channel systems

The objective of this thesis is theoretical investigations and numerical simulations of Two Way Relay Channel (TWRC) systems, particularly in an impulsive noise environment. Special attention is given to investigation of a TWRC system based on polarized antennas. The first part of the thesis focuses on modelling of impulsive noise and the effect of impulsive noise on TWRC systems. The study was conducted by simulating the wireless TWRC models in the presence of impulsive noise. The bit error probability performance of the channel data was compared and at last their results are shown by graphs. The study has been further extended to multi antenna TWRC systems. Simulation analysis of multi antenna TWRC systems in an impulsive noise environment was conducted by using a MISO Alamouti scheme and a MIMO system. The second part of the thesis dedicated to investigation of TWRC polarization systems. A new TWRC scheme based on polarized antennas has been proposed and simulated. By polarization we are able to achieve higher spectral efficiency through the use of spatial multiplexing, and improve the reliability by spatial diversity. A new network topology based on TWRC polarization systems proposed. It is well suited to mitigate effect of delay in a communication system, particularly for high priority data transmission, or increase reliability of a communication system by redundant transmission

Enabling Ultra Reliable Wireless Communications for Factory Automation with Distributed MIMO

Factory automation is one of the most challenging use cases for 5G-and-beyond mobile networks due to strict latency, availability and reliability constraints. In this work, an indoor factory scenario is considered, and distributed multiple-input multiple-output (MIMO) schemes are investigated in order to enable reliable communication to the actuators (ACs) active in the factory. Different levels of coordination among the access points serving the ACs and several beamforming schemes are considered and analyzed. To enforce system reliability, a max-min power allocation (MPA) algorithm is proposed, aimed at improving the signal to interference plus noise ratio (SINR) of the ACs with the worst channel conditions. Extensive system simulations are performed in a realistic scenario, which includes a new path-loss model based on recent measurements in factory scenarios, and, also, the presence of non-Gaussian impulsive noise. Numerical results show that distributed MIMO schemes with zero-forcing (ZF) beamforming and MPA have the potential of providing SINR gains in the order of tens of dB with respect to a centralized MIMO deployment, as well as that the impulsive noise can strongly degrade the system performance and thus requires specific detection and mitigation techniques.Comment: Accepted at the IEEE Vehicular Technology Conference (VTC-Fall), Honolulu (HI), Sep. 201

Modeling and Optimization of Next-Generation Wireless Access Networks

The ultimate goal of the next generation access networks is to provide all network users, whether they are fixed or mobile, indoor or outdoor, with high data rate connectivity, while ensuring a high quality of service. In order to realize this ambitious goal, delay, jitter, error rate and packet loss should be minimized: a goal that can only be achieved through integrating different technologies, including passive optical networks, 4th generation wireless networks, and femtocells, among others. This thesis focuses on medium access control and physical layers of future networks. In this regard, the first part of this thesis discusses techniques to improve the end-to-end quality of service in hybrid optical-wireless networks. In these hybrid networks, users are connected to a wireless base station that relays their data to the core network through an optical connection. Hence, by integrating wireless and optical parts of these networks, a smart scheduler can predict the incoming traffic to the optical network. The prediction data generated herein is then used to propose a traffic-aware dynamic bandwidth assignment algorithm for reducing the end-to-end delay. The second part of this thesis addresses the challenging problem of interference management in a two-tier macrocell/femtocell network. A high quality, high speed connection for indoor users is ensured only if the network has a high signal to noise ratio. A requirement that can be fulfilled with using femtocells in cellular networks. However, since femtocells generate harmful interference to macrocell users in proximity of them, careful analysis and realistic models should be developed to manage the introduced interference. Thus, a realistic model for femtocell interference outside suburban houses is proposed and several performance measures, e.g., signal to interference and noise ratio and outage probability are derived mathematically for further analysis. The quality of service of cellular networks can be degraded by several factors. For example, in industrial environments, simultaneous fading and strong impulsive noise significantly deteriorate the error rate performance. In the third part of this thesis, a technique to improve the bit error rate of orthogonal frequency division multiplexing systems in industrial environments is presented. This system is the most widely used technology in next-generation networks, and is very susceptible to impulsive noise, especially in fading channels. Mathematical analysis proves that the proposed method can effectively mitigate the degradation caused by impulsive noise and significantly improve signal to interference and noise ratio and bit error rate, even in frequency-selective fading channels

Factors affecting the bit error rate performance of the indoor radio propagation channel for 2.3-2.5 GHz frequency band

The use of wireless in buildings based on microwave radio technology has recently become a viable alternative to the traditional wired transmission media. Because of the portable nature of radio transceivers, the need for extensive cabling of buildings with either twisted pair, coaxial, or optical fibre cable is eliminated. This is particularly desirable where high user mobility occurs and existing wiring is not in place, or buildings are heritage in nature and extensive cabling is seen as intrusive. Economic analysis bas also shown that significant labour cost savings can result by using a radio system or a hybrid mix of cable and radio for personal communication. The use of wireless systems within buildings introduces a new physical radio wave propagation medium, namely the indoor radio propagation channel. This physical medium has significantly different characteristics to some of the other forms of radio channels where elevated antennas, longer propagation path distances, and often minimally obstructed paths between transmit and receive antenna are common. Radio waves transmitted over the indoor channel at microwave frequencies behave much like light rays, they are blocked, scattered, and reflected by objects in the environment. As a direct result of this several phenomena unique to this form of physical medium become apparent, and they must be accounted for in the design and modelling of the indoor radio propagation channel transmission performance. In this thesis we analyse and characterise the indoor radio channel as a physical medium for data transmission. The research focuses on the influence of the radio physics aspects of an indoor microwave channel on the data transmission quality. We identify the associated statistical error performance for both time varying and temporally stationary indoor channels. Together with the theoretical analysis of the channel, a series of propagation measurements within buildings are completed to permit empirical validation of the theoretical predictions of how the indoor microwave channel should perform. The measurements are performed in the frequency range 2.3-2.5 GHz, which includes the 2.4-2.4835 GHz band allocated by spectrum management authorities for industrial scientific and medical radio use, (ISM band). As a direct result of our measurements, statistics related to channel noise, fading, and impulse response for the indoor microwave channel are obtained. The relationship between data transmission error statistics and the aforementioned phenomena is quantified and statistically analysed for the indoor radio channel and phase shift keyed (PSK) modulation. The results obtained from this research provide input data for the development of a simulation model of an indoor wireless mobile channel. Our measurements identify microwave ovens as a channel noise source of sufficient magnitude to corrupt data transmission in the ISM band, and an in depth analysis of the effect of noise emissions from operational microwave ovens on PSK modulation is presented in this thesis. As a result of this analysis, the estimated data error rates are calculated. Channel fading measurements provide results that will be used as the input data for the design of antennas for use on the indoor microwave channel. We also show that a data rate of eight megabits/second is possible over the typical indoor radio channel, with no requirement for adaptive delay equalisation to counter multipath signal delay spread

A Fast Blind Impulse Detector for Bernoulli-Gaussian Noise in Underspread Channel

The Bernoulli-Gaussian (BG) model is practical to characterize impulsive noises that widely exist in various communication systems. To estimate the BG model parameters from noise measurements, a precise impulse detection is essential. In this paper, we propose a novel blind impulse detector, which is proven to be fast and accurate for BG noise in underspread communication channels.Comment: v2 to appear in IEEE ICC 2018, Kansas City, MO, USA, May 2018 Minor erratums added in v