Sources of Variations in Error Sensitivity of Computer Systems

Technology scaling is reducing the reliability of integrated circuits. This makes it important to provide computers with mechanisms that can detect and correct hardware errors. This thesis deals with the problem of assessing the hardware error sensitivity of computer systems. Error sensitivity, which is the likelihood that a hardware error will escape detection and produce an erroneous output, measures a system’s inability to detect hardware errors. This thesis present the results of a series of fault injection experiments that investigated how er- ror sensitivity varies for different system characteristics, including (i) the inputs processed by a program, (ii) a program’s source code implementation, and (iii) the use of compiler optimizations. The study focused on the impact of tran- sient hardware faults that result in bit errors in CPU registers and main memory locations. We investigated how the error sensitivity varies for single-bit errors vs. double-bit errors, and how error sensitivity varies with respect to machine instructions that were targeted for fault injection. The results show that the in- put profile and source code implementation of the investigated programs had a major impact on error sensitivity, while using different compiler optimizations caused only minor variations. There was no significant difference in error sen- sitivity between single-bit and double-bit errors. Finally, the error sensitivity seems to depend more on the type of data processed by an instruction than on the instruction type

SEU Sensitivity Comparison for Different Reprogrammable Technologies With Minority Check Block

In this work, a method is proposed for obtaining comparable measurements of the SEU sensitivity in reprogrammable devices that present different characteristics like internal architecture, technology, amount of available resources, etc. A specific minority checker is developed for reporting the presence of SEUs or MBUs which will help in this comparing task during dynamic tests.This work was supported in part by the Spanish Ministry of Science and Technology, code TEC2010-22095-C03-03. RENASER+ projec

Towards Accurate Estimation of Error Sensitivity in Computer Systems

Fault injection is an increasingly important method for assessing, measuringand observing the system-level impact of hardware and software faults in computer systems. This thesis presents the results of a series of experimental studies in which fault injection was used to investigate the impact of bit-flip errors on program execution. The studies were motivated by the fact that transient hardware faults in microprocessors can cause bit-flip errors that can propagate to the microprocessors instruction set architecture registers and main memory. As the rate of such hardware faults is expected to increase with technology scaling, there is a need to better understand how these errors (known as ‘soft errors’) influence program execution, especially in safety-critical systems.Using ISA-level fault injection, we investigate how five aspects, or factors, influence the error sensitivity of a program. We define error sensitivity as the conditional probability that a bit-flip error in live data in an ISA-register or main-memory word will cause a program to produce silent data corruption (SDC; i.e., an erroneous result). We also consider the estimation of a measure called SDC count, which represents the number of ISA-level bit flips that cause an SDC.The five factors addressed are (a) the inputs processed by a program, (b) the level of compiler optimization, (c) the implementation of the program in the source code, (d) the fault model (single bit flips vs double bit flips) and (e)the fault-injection technique (inject-on-write vs inject-on-read). Our results show that these factors affect the error sensitivity in many ways; some factors strongly impact the error sensitivity or SDC count whereas others show a weaker impact. For example, our experiments show that single bit flips tend to cause SDCs more than double bit flips; compiler optimization positively impacts the SDC count but not necessarily the error sensitivity; the error sensitivity varies between 20% and 50% among the programs we tested; and variations in input affect the error sensitivity significantly for most of the tested programs

SIRU development. Volume 1: System development

A complete description of the development and initial evaluation of the Strapdown Inertial Reference Unit (SIRU) system is reported. System development documents the system mechanization with the analytic formulation for fault detection and isolation processing structure; the hardware redundancy design and the individual modularity features; the computational structure and facilities; and the initial subsystem evaluation results

Centralized calibration of power system dynamic models using variational data assimilation

This paper presents a novel centralized, variational data assimilation approach for calibrating transient dynamic models in electrical power systems, focusing on load model parameters. With the increasing importance of inverter-based resources, assessing power systems' dynamic performance under disturbances has become challenging, necessitating robust model calibration methods. The proposed approach expands on previous Bayesian frameworks by establishing a posterior distribution of parameters using an approximation around the maximum a posteriori value. We illustrate the efficacy of our method by generating events of varying intensity, highlighting its ability to capture the systems' evolution accurately and with associated uncertainty estimates. This research improves the precision of dynamic performance assessments in modern power systems, with potential applications in managing uncertainties and optimizing system operations.Comment: 9 pages, 8 figures, and 1 tabl

Evolution of shuttle avionics redundancy management/fault tolerance

The challenge of providing redundancy management (RM) and fault tolerance to meet the Shuttle Program requirements of fail operational/fail safe for the avionics systems was complicated by the critical program constraints of weight, cost, and schedule. The basic and sometimes false effectivity of less than pure RM designs is addressed. Evolution of the multiple input selection filter (the heart of the RM function) is discussed with emphasis on the subtle interactions of the flight control system that were found to be potentially catastrophic. Several other general RM development problems are discussed, with particular emphasis on the inertial measurement unit RM, indicative of the complexity of managing that three string system and its critical interfaces with the guidance and control systems

Digital Filters

The new technology advances provide that a great number of system signals can be easily measured with a low cost. The main problem is that usually only a fraction of the signal is useful for different purposes, for example maintenance, DVD-recorders, computers, electric/electronic circuits, econometric, optimization, etc. Digital filters are the most versatile, practical and effective methods for extracting the information necessary from the signal. They can be dynamic, so they can be automatically or manually adjusted to the external and internal conditions. Presented in this book are the most advanced digital filters including different case studies and the most relevant literature