Experimental investigation of cavitation signatures in an automotive torque converter using a microwave telemetry technique

A unique experimental investigation of cavitation signatures in an automotive torque converter under stall conditions is reported. A quantitative criterion is proposed for predicting early and advanced cavitation in terms of suitable nondimensional pump speeds. The dimensionless pump speed that marks early cavitation is obtained by relating this parameter to the appearance of charge-pressure–dependent pressure fluctuations in the differential pressure transducer readings. The differential pressure transducers were mounted at well-defined locations in the pump passage of a torque converter. The data were transmitted by a wireless telemetry system mounted on the pump housing. Data were received and processed by a ground-based data acquisition system. Automatic transmission fluid exhibited cavitation for charge pressures of 70–130 psi and pump speeds of 1000– 2250 rpm. Advanced cavitation was marked by operating conditions that exhibited a 2% or more torque degradation from the converter\u27s noncavitating performance. For a given family of torque-converter designs and a given transmission fluid, the proposed nondimensional pumpspeed criteria are capable of marking early and advanced stages of cavitation for a range of torque-converter sizes and a range of charge pressures in the torque converter

Experimental investigation of cavitation signatures in an automotive torque converter using a microwave telemetry technique

A unique experimental investigation of cavitation signatures in an automotive torque converter under stall conditions is reported. A quantitative criterion is proposed for predicting early and advanced cavitation in terms of suitable nondimensional pump speeds. The dimensionless pump speed that marks early cavitation is obtained by relating this parameter to the appearance of charge-pressure–dependent pressure fluctuations in the differential pressure transducer readings. The differential pressure transducers were mounted at well-defined locations in the pump passage of a torque converter. The data were transmitted by a wireless telemetry system mounted on the pump housing. Data were received and processed by a ground-based data acquisition system. Automatic transmission fluid exhibited cavitation for charge pressures of 70–130 psi and pump speeds of 1000– 2250 rpm. Advanced cavitation was marked by operating conditions that exhibited a 2% or more torque degradation from the converter\u27s noncavitating performance. For a given family of torque-converter designs and a given transmission fluid, the proposed nondimensional pumpspeed criteria are capable of marking early and advanced stages of cavitation for a range of torque-converter sizes and a range of charge pressures in the torque converter

Microdosing for drug delivery application—A review

There is an increasing amount of research on microfluidic actuators with the aim to improve drug dosing applications. Micropumps are promising as they reduce the size and energy consumption of dosing concepts and enable new therapies. Even though there are evident advantages, there are only few examples of industrial microdosing units and micropump technology has not yet found widespread application. To answer the evoked question of what limits the application of microdosing technology for drug delivery, this work provides a comprehensive insight into the subject of drug dosing. We highlight and analyse specific microfluidic challenges and requirements in medical dosing: safety relevant aspects, such as prevention of freeflow and backflow; dosing-specific requirements, such as dosing precision and stability; and system-specific aspects, such as size, weight, and power restrictions or economic aspects. Based on these requirements, we evaluate the suitability of different mechanical micropumps and actuation mechanisms for drug administration. In addition to research work, we present industrial microdosing systems that are commercially available or close to market release. We then summarize outstanding technical solutions that ensure sufficient fluidic performance, guarantee a safe use, and fulfil the specific requirements of medical microdosing

Definition and preliminary design of the Laser Atmospheric Wind Sounder (LAWS) phase 1. Volume 2

The steps and engineering trades and analyses used in establishing the initial requirements and in developing a concept and configuration for the laser atmospheric wind sounder (LAWS) instrument. A summary of the performance anticipated from the baseline configuration, and a bibliography are presented. LAWS, which is a facility instrument of the Earth observing system (EOS), is the culmination of over 20 years of effort in the field of laser Doppler wind sensing and will be the first instrument to fly in space capable of providing global-scale tropospheric wind profiles at high spatial resolutions. Global-scale wind profiles are necessary for: (1) more accurate diagnosis of large-scale circulation and climate dynamics; (2) improved numerical weather prediction; (3) improved understanding of mesoscale systems; and (4) improved understanding of global biogeochemical and hydrologic cycles. The objective of phase 1 was to define and perform a preliminary design for the LAWS instrument. The definition phase consisted of identifying realistic concepts for LAWS and analyzing them in sufficient detail to be able to choose the most promising one for the LAWS instrument. Systems and subsystems configurations were then developed for the chosen concept. The concept and subsequent configuration were to be compatible with two prospective platforms: the Japanese polar orbiting platform (JPOP) and as an attached payload on the Space Station Freedom. After a thorough and objective concept selection process, a heterodyne detection Doppler lidar using a CO2 laser transmitter operating a 9.1 micron over a 2.1 micron solid state system was chosen. A configuration for LAWS that meets the performance requirements was designed at the conclusion of phase 1

Artificial Muscles

Course material for "Artificial Muscles" e-course

Bucky gel actuator for morphing applications

Since the demonstration of Bucky Gel Actuator (BGA) in 2005, a great deal of effort has been exerted to develop novel applications for electro-active morphing materials. Three-layered bimorph nanocomposite has become an excellent candidate for morphing applications since it can be easily fabricated, operated in air, and driven with few volts. There has been limited published study on the mechanical properties of BGA. In this study, the effect of three parameters: layer thickness, carbon nanotube type, and weight fraction of components, on the mechanical properties was investigated. Samples were characterized via nano-indentation and DMA. It was found that BGA composed of 22 wt% single-walled carbon nanotubes and 45 wt% ionic liquid exhibited the highest hardness, adhesion, elastic and storage moduli. Most of BGA potential applications would require control over one BGA output: displacement. In this study, various sets of experiments were designed to investigate the effect of several parameters on the maximum lateral displacement of BGA. Two input parameters: voltage and frequency, and three material/design parameters: carbon nanotube type, thickness, and weight fraction of constituents, were selected. A new thickness ratio term was also introduced to study the role of individual layers on BGA displacement. In addition, an important factor in the design of BGA-based devices, lifetime, was investigated. Finally, possible degradation of BGA was studied by repeating displacement measurements after several weeks of being stored. Based on displacement studies, a new model was established utilizing nonlinear regression to predict BGA maximum displacement based on the effect of these parameters. This model was verified by comparing its predictions with other reported results in the literature. The model displayed a very good fit with various reported cases of BGA samples made with different types of CNT and ionic liquid. Microfluidics is a promising field of application for BGA. A brief literature review on the electroactive mechanisms used in microfluidics is presented. Preliminary force studies proved that BGA has the capability to be employed as a microvalve. A flow regulator utilizing a BGA microvalve was designed and fabricated. Flow rate measurements showed the capability of BGA-valve in manipulating the flow rate in different ranges

Electro-chemo-mechanical deformation studies on polypyrrole covered gelatin fiber scaffolds

http://www.ester.ee/record=b4611227*es